Use FCAW welding process for minimum heatinput Alternatively use 2. Dia electrode for SMAW process. Ensure no gap between tube to fin / shaped plate Always fit shaped plate at the centre of tube Adequate prehehat should be done to avoid shrinkage / distortion.
Use FCAW welding process for minimum heatinput Alternatively use 2. Dia electrode for SMAW process. Ensure no gap between tube to fin / shaped plate Always fit shaped plate at the centre of tube Adequate prehehat should be done to avoid shrinkage / distortion.
Use FCAW welding process for minimum heatinput Alternatively use 2. Dia electrode for SMAW process. Ensure no gap between tube to fin / shaped plate Always fit shaped plate at the centre of tube Adequate prehehat should be done to avoid shrinkage / distortion.
Alternatively use 2.5 dia electrode for SMAW process. Ensure no gap between tube to fin/shaped plate Always fit shaped plate at the centre of tube Adequate prehehat should be done to avoid shrinkage/distortion Always weld from center to outward direction to properly dissipate heat first and last tube of opening should be welded at last.