Professional Documents
Culture Documents
Picture position during adjustment H shift dan V shift / V. Ampl on NTSC 3.58MHz :
A B
C
- Please follow three adjustment item above in NTSC 3.58MHzposition, after adjustment in PAL
position.
- Adjust H. centering to get circle position which has balance on right and left ( A=B )
- Adjust V. amplifier to get a good circle height.
- Adjust V. shift so that the circle position on upper and bottom are same (C = D = 5 to 10mm).
- Each time switch adustment to PAL, then adjustment on NTSC 3.58 must be repeated again.