PROPERTIES
APPLICATIONS.
Both sides heat sealable
Excellent mechanical properties
High transparency
Good slip & anti-static property
Suitable for food contact
Technical Data Sheet
TRANSPARENT, BOTH SIDES HEAT SEALABLE, CORONA TREATED
* Printing (Rotogravure and Flexographic) & Lamination
BOPP FILM
| Technical Properties Units ne __Typical Values Method
Nominal Thickness Micron 40 NPI
Unit Weight gmim’ 1365 1638 1820 2002 2275 27.30 31.85 36.40 NPL
Yield ming [73.26 61.05 54.95 49.05 43.95 36.63 31.40 27.47 NPI
Wetting Tension __—_dynes/em 38 min ASTM D2678
% ASTM D1003
=i com ASTM D2457
x! astm 1804
Tensile Strength at | MD Bia
Break TD = ASTM D862,
Elongation at Break - ‘ASTM D882
Heat Seal Strength 745 | 4 Bar, 1 Sec
Dimensional 120°C,
_Stability se 5 Min/Air
Heat Seal Range F
(Ur-Treatod Sue) iC 105-140 | 1 Bat 4 See
Water Vapor 4 ASTM F1249
Transmission Rate | 9M /24hrs a 38 *C,90% RH
MD: Machine Direction, TD: Transverse Direction, FxF:UTR/UTR
‘STORAGE AND HANDLING
In order to minimize deterioration of the level of surface treatment, storage temperature of below 30°C is recommended for
Heat sealable both side treated films. The film should be conditioned at room temperature for at least 24 hours before use,
film is suitable for use up to 6 months from the date of production
FOOD CONTACT
Raw Material used for production of the film is approved by EU and FDA. Specific document and safety data sheet are
available on request.