CAD Study guide By: Brandon Hopkins Period: 3rd Date: 08 / 27 / 15 Notes A regular standard piece of printer paper must be 8. Inches x 11 inches. A border (Title Block) line weight must be.9mm a visible line must have a line weight of.7mm all other line besides a border and visible line have to be.5mm a standard size of drawing paper is 9 inches x 12 inches.
CAD Study guide By: Brandon Hopkins Period: 3rd Date: 08 / 27 / 15 Notes A regular standard piece of printer paper must be 8. Inches x 11 inches. A border (Title Block) line weight must be.9mm a visible line must have a line weight of.7mm all other line besides a border and visible line have to be.5mm a standard size of drawing paper is 9 inches x 12 inches.
CAD Study guide By: Brandon Hopkins Period: 3rd Date: 08 / 27 / 15 Notes A regular standard piece of printer paper must be 8. Inches x 11 inches. A border (Title Block) line weight must be.9mm a visible line must have a line weight of.7mm all other line besides a border and visible line have to be.5mm a standard size of drawing paper is 9 inches x 12 inches.
Period: 3rd Date: 08/27/15 Notes A regular standard piece of printer paper must be 8.5 inches x 11 inches. A border (Title Block) line weight must be .9mm A visible line must have a line weight of .7mm All other line besides a border and visible line have to be .5mm A standard size of drawing paper is 9 inches x 12 inches. To find the size of the next kind of paper, ex. (A=8.5in x 11in, B= 11in x 17in.), you must use the previous letter sizes second number as the first number on the next letter size, and multiply the previous letter sizes first number by 2 to get the second number on the next letter size. Commands on CAD: Command 1= open and close tool sets, Command 2= Content, Command 3= Open and Close Command line, Command 4= Layers, Command 5= Properties Inspector, Command 6= Status Bar, Command 7= Reference Manager, Command 8= Project Manager, Command 9= Materials Browser. More Commands on CAD: IF you type LINE on the command line, you are able to start a line. If you type OFFSET, you are able to make lines a certain distance from other lines. If you type TRIM, you will be able to trim a certain line. If
you type TEXT, you will be able to put words and
different text into your drawing. To make a paper fit in your border you take a half inch off each side of a paper. Ex. (A= 8.5in x 11in, to fit in border A= 7.5in x 10in.) The text where you name goes must be .125in in the Title box on your border. Ortho mode makes it to where all of your lines are completely straight.