Professional Documents
Culture Documents
Presentation On IFHS STEEL
Presentation On IFHS STEEL
MTECH(materials eng.)
Deformation
Recovery
Re-crystallization
Recovery kinetics
Re-crystallization kinetics
Discussion
Conclusion
Deformation
Texture
Elastic
deformation
Plastic deformation
Change in grain
size, strength,
number of
dislocation
Change in dimension
of metal under load
Increase in hardness,
strength, decreases
ductility
Annealing
Recrystallization
Restoration of physical
properties cold worked
metal without change
in microstructure
Recovery
Increase in
electrical &
thermal
conductivity
Grain
Growth
Change in
physical,
mechanical
properties
RecoveryHighly
Some recovery
recovered
Recovery kinetics
rate of recovery inversely proportional to
annealing time
d /dt = -A/t
=B-A ln t ,
where A,B
are constant
-y =MGb1/2
heterogeneou
s
Stored energy is
driving force for
recovery & recrystallization
Recrystallization
Minimum
amount of
deformation
is needed for
recrystallizati
on
Replacement of
cold worked
structure by new
set of strain-free
grains
increase in area of grain
boundary due to increase
in grain size
Decrease in hardness
& strength , increase
in ductility , density
of dislocation
decrease
Composition
Time
Amount of
deformation
Factors influence
recrystallization
Temperature
Amount of
recovery
conclusion
THANKS A LOT
ANY QUESTION
PLEASE