Professional Documents
Culture Documents
Bulkhead F-1
(make 1)
Bulkhead F-2
(make 1)
Fwd fuselage
top outside
(make 1)
Scale in inches
Wing
(make 1)
Turtledeck Top
(make 1)
Canopy
(make 12 with 6 mm Depron
(14 if BlueCore) and
Note: Inside of canopy can be
laminate together)
hollowed out if airplane CG is not
already too far aft
Nosecone
(make 12 with 6 mm Depron
(14 if BlueCore) and
laminate together)
Vertical Tail
(make 1)
Inlet spacer
(make 2 from
3 mm Depron)
gle
Fuselage top s
(make 2 and lam
F-2
F-1
3/8" balsa triangle
Template for rudder pushrod end Elevon and rudder control horns
(make 1 from 1/32" music wire)
(make 3 from 1/32" plywood)
op spine
laminate)
Motor mount
(make 1)
Copyright 2004
rns