Smarter Material for Smart Cities
Contributed by: Jindal Steel and Power Ltd,
eae ee ea ae ae
echectire Het cay estan sche calane JSPL has introduced ready to use TMT bars which are cut
‘and bent according to the bar bending schedule. Having been
produced in factory environment, this process gives accurate
sizes and curves, produces minimal scrap and uses lesser labour
peer tonne which ultimately translates into cost savings for the
customer. These are made
Using Jindal Panther TMT
bars which are ideal for
For india to realize the Prime Ministers visionary idea of
‘Smart Cities, it would require not only safe architecture, but also,
smarter materials and solutions which make the construction
process easier and faster. Steel asa structural material provides,
respite to structural engineers and architects alike since its
ductile ands thus resilient. Buildings using steel structures are
lighter than concrete ones thereby attracting lesser seismic forces
and also allow the flexibility of complex shapes. crreamrnaerigyes
Eying these opportunities and the latent potential in this, loading conditions making it
sector, JSPL has introduced smart, eco-friendly and innovative an ideal choice for buildings
construction solutions to harness the need for a lighter. faster and in high seismic zones,
easier method of construction. Presented below are key materials Welded Mesh: Readymade TMT Mesh Which Saves
of this portfolio. rrineand Cost
‘Speedfloor: Cast Floors without Decking Sheet or
Props
JSPL’s welded meshis another highly
efficient product that helps in faster
The company has introduced a revolutionary and innovative construction. tis a pracessed steel product
technique to eliminate the outdated conventional flooring system that consists of re-bars welded together to
with suspended concrete flooring system called Jindal Speedfioor. form a mesh. The use of readymade welded
Alight-weight technology from New Zealand, itis quick and easy wire mesh at construction sites has made
to install tat reduces the siab construction cycle from 3 weeks construction much faster due to the elimination
toless than a week, thus ensuring rapid construction. Compatible of various time-consuming activities such as
with steel and concrete frames, Speedfioor reduces both the cutting, marking and spacing of bars and binding
of wires to the bars. it is aready to use, cost
effective and less labour intensive technique ideal for construction
cof concrete roads and casting of slabs and retaining wall
Structural Insulated Panels: Construct Homes
without Constructing Them
This system will spawn a new age in India construction sector
with pre-fabricated panels being shipped to site and being
erected much faster than any system currently available. Made
Using a technology from US, the components of the systemUdi Sua eat
include EPS core, LGS framing and MgO board, making it 2
‘complete structural unt in itself, With built-in insulation and fast
construction, these panels are ideal for high altitudes and mass
housing. These are an improvement over the current light weight
building systems and will prove to be a one shot solution for pre~
fabricated structure needs.
Reinforced EPS: Thermally Efficient Construction
A renowned building technology from Schnell, Reinforced
EPS is a smart construction technique to stay cool in summer and
warm in winters without the need of additional insulation, Light
and easy to instal, the technology is 50% faster than traditional
‘mode and helps in saving upto 30% electricity consumption
‘through its supreme thermal efficiency, The technology can be
Used for load bearing walls (up to G+3), external wall cladding,
rnon-load bearing partition
walls floors and roofs,
EPS panels are used in
construction of Industrial
Townships and Colonies,
Mass Housing, Staff
Quarters and Hostels. The
JSPL residential township,
‘at Angul has been built using this technology and temperature:
differences of up to 5°C can be observed inside the homes.
Jindal Global Road Stabilizers (JGRS): For Roads
That Are ‘Hard’ To Beat
Inline with Government of India's fast-tracking of road
construction in India, SPL has introduced a cutting-edge, eco
friendly sol stabilization technology called JGRS, which helps in
increasing the bearing capacity of in-situ sol by stabilization,
This technology helps in reduction of thickness of the road layers
‘and uses locally available material thus eliminating the need for
transporting stone aggregates for large distances. JGRS reduces
the cost by 20 to 30% and leads to 40 to 45% faster construction
over conventional roads.
The roads constructed
Using JGRS are durable and
maintenance free. It can be
used for construction of
Highways, High-Altitude
Roads, Airstrips and railway
lembankments.
Jindal Panther Cement: Lohe Se Bana, Lohe Sa
Bana
A premium cement brand from JSPL, Jindal Panther Cement.
has unmatched strength, is highly durable and corrosion resistant
to meet the growing complex construction requirement of
contractors, architects and owners looking for sturdy and durable =
‘concrete, Jindal Panther Cement is made using slag from our
processes which ensure excellent quality Jindal Panther Cement
Js being produced at ISPL's Raigarh facility with a production
capacity of 0.7 MTPA, and the company plans to ramp up the
capacity to 3 MTPA,
Light Weight Aggregate (LWA): Aggregate That Is
Clean, Green and Lean
Another fortifying product being rolled out is LWA, an eco-
friendly aggregate that is up to 50% lighter than conventional
aggregate. Lighter aggregate triggers lighter concrete, which
in-tur brings down the
weight of the building, Made
entirely from fly-ash ts high
strength combined with low
density makes it ideal fr use
in structural concrete used in
bridges and highways
Fly-Ash Brick: High on Strength, High on
The company is manufacturing high-strength bricks made
of fly-ash, a by-product of power plants at Raigarh and Angul
With high strength and excellent finish, these bricks can be used
in load bearing walls. Their
supreme finish helps save
construction time and
cost in binding mortar
and plaster. The company
currently produces
approximately 3 Lakh
bricks per day from ts
plants in Raigarh and Angul
All these materials are tested internally, engineered to
magnify advantages and then rolled out to external market to
realise innovative construction,
With a commitment to innovate, JSPL continuously evolves
and adopts novel construction materials and solutions to achieve
hassle free construction
For further details contact: Jindal Steel & Power Ltd. (JSPL)
Web: wirwindalsteelpower.com