Ee
CMEC ice ee!
NTC/PTC temperature sensors
Measurement of air temperatures between -40 °C and +130 °C e
@ Measurement with tempera-
ture-dependent resistors
@ Broad temperature range
Offer
PTC temperature sensor
Design: PTC thermistor in waterproof
plastic housing,
Application: Measurement of air tempera
ture under extreme ambient conditions up
toes
ar aia 087
NTC temperature sensor
Design: NTC thermistor in waterproof
plastic housing
Application: Measurement of air tempera: i
{ure under extreme ambient concttons up Technical data / Range
10.85 °C. at No. 4447 212 0974 147 972 059 0 260 190 039 0280 130 085
: 1447 212 069 Characteristie curve Ea 2 a 4
Measuring range (0965-40 8B GDA. 9190
Accessories Pormissible temp. max °C +00 =100. = 140
Socket housing AMPNo. 180907-1 Resistance at 95°C kQ 142% —*10a5%__—25aB GS) 945 96
Receptacle ‘AMP-No. 1605262 Resistance at 10°C k= = 826. 1056 —
°G ka = = 220.272 94264%
NTC temperature sensor soc a 0:90 096
Design NTC thermistor m plastic Max eadgat 85°C W 35
heating, soa! housing Nomina vcliage v 7
Appicaton: Meagurement of artempera- Measuring caren
{ute up t9 130°C comemeene a eee
280190039 — Se¥osing forma R= S z
permiooble posters
Accessories Pe ainW and satonary
Comecior 7237000036 (20°C)
als Sane] sé —= = an sa
NTC temperature sensor Tene contort |
Design: Po}amide housing. Geaserece ee : e : e@
Aopisaton Measurement of airtempera: ina 7
ture up to 190°C Dead ino 7
0260150085 Permantie vation
fcoseiston ssined —m-? eco so_____0
Accessories
Comettor 12571000036
Time required to reach 63 % of final valu for diference in resistance, given an abrupt increase na
78; ar rosoure 1000 mbar iefow rte Bm ,
stant sina for a temperature jump of 80°C» +20°C at an sivlow rate of = 6 m=
For mounting purposes, the sensor is
plugged into the corresponding socket
‘Characteristic curve 1
ka a
5|
oe ae| | “atabawieDimension drawings |
4147 212.097/089
ed
“0
25 u
{
ft Op eto
sat SS
LOE Ae fae
bor Lagan
ia
Tara
arate
0200 130039
wens
1 cast
Thosate
Bit
Toot} &
0.280 190 088
‘A Plug as perC 280 202 204 A
B Protec slooww
Car tow
‘
fe
min el
nae 28
eee ieee ed
Design and function
NTC sensor
‘The sensing element of an NTC tompera
ture sensor (NTC: Negative Temperature
Coefficient) , is a resistor made up of metal
‘oxides and dxidized mixed crystals. This
mitre is produced by means of sintering
and pressing with the addition of binding
agents. For automotive applications, NTC
thormistors are provided with a protective
housing
ILNTC thermistors are exposed to a source
of extemal heat, their resistance drops.
drasticaly and, provided the supply voltage
Femains constant, ther current input climbs
rapidly. This property can be utiized for
temperature measurement. NTC sensors
are suitable for a wide range of ambient
Conditions, and they make it possible to
measure temperatures over a very broad
spectrum,
PTC sensor
‘The sensing oloment of the PTC tempera:
ture sensor 1 147 212 037 is a silicon
resistor [PTC: Positive Temperature
Coton).
Installation instructions
Installation is to be effected such that the
{front part withthe sensing element is
rectly exposed to the airflow. The ribs
(onthe thnsfilm temperature sensor are
designed to provide mechanical protection
for the ceramic subetrate.
Explanation of symbols:
R- Resistance
V Volumetric flow
8 Temperature
Temperature sensor (Principe)
{Electret connection
2 Housing
NTC rast PTC resistor
Diagram
00)