Professional Documents
Culture Documents
Read Me
Read Me
To install, simply copy the dll file into your VST folder.
Included are some presets that run through the capabilities of the plug-in.
This plug-in is free for both personal and commercial use, but please don't redi
stribute - just refer others directly to the download link below.
Free direct download link:
http://www.christopherhooker.com/Public%20Refs/OC-D2.zip
What is OC-D2?
OC-D2 is an octave divider plug-in that generates signals one and two octaves be
low the original. It's based on the popular Boss OC-2 pedal, but with many more
features and customizability far beyond what other octavers offer (both pedal a
nd plug-in types).
It's unique from the Boss and other pedals (and other octaver plug-ins) in that
it offers:
- Controls to all the typically fixed values for low-pass filters - both on osci
llator outputs (changes tone from full square wave to pure sine, or anywhere in
between) as well as on the detection circuit (which can fine-tune the accuracy o
f the octave-divider's tracking).
- Option for two modes of operation: additive oscillators or phase-multiplier.
The additive mode simply mixes in the octave down signals (via user-adjustable l
evels and wet/dry balance), whereas the phase-multiplier mode flips the phase of
the key signal, following the state of the selected oscillator.
- In additive mode, dynamics for the oscillators can be controlled either by a n
oise gate or an envelope follower, both keyed off the input signal. In phase-mu
ltiplier mode, the full dynamics of the key signal are retained.
- A DC-offset switch corrects the input signal to improve tracking on rectified
or offset signals.
- A scope displays both the key signal and the output signal, so the use can see
how the plug-in is operating, and help identify what controls need to be adjust
ed in order to track more accurately or produce the intended sound. Includes a
"tuning" control to affect the zoom ratio.
- "Listen" radio buttons allow the user to tap the audio at any stage to hear wh
at's happening behind the scenes, and bypass certain sections if desired.
- Many users of the Boss OC-2 pedal seek to add a hardware modification that dis
ables the output filter and dynamics sections in order to produce a more synth-l
ike tone. This plug-in has the capability to easily reproduce this mod, by adju
sting only a few parameters.
Comments? Suggestions? Contact the developer at chris@christopherhooker.com