Professional Documents
Culture Documents
DEUTSCHE NORM
ICS 87.040
Coating powders
Part 3: Determination of density by liquid displacement pyknometer
(ISO 8130-3:1992)
Pulverlacke Teil 3: Bestimmung der Dichte mit einem Pyknometer durch Flssigkeitsverdrngung
(ISO 8130-3:1992)
National foreword
This standard has been prepared by ISO/TC 35 Paints and varnishes, SC 9 General test methods for paints
and varnishes.
The responsible German body involved in its preparation was the Normenausschuss Beschichtungsstoffe
und Beschichtungen (Coatings and Coating Materials Standards Committee).
The DIN Standards corresponding to the International Standards referred to in clause 2 of the ISO Standard
are as follows:
ISO Standard
DIN Standard
ISO
ISO
ISO
ISO
DIN
DIN
DIN
DIN
787-10
842
3696
8130-2
EN ISO 787-10
EN ISO 15528
ISO 3696
ISO 8130-2
Amendments
DIN 55990-3, December 1979 edition, has been superseded by the specications of DIN ISO 8130-2 and
DIN ISO 8130-3.
Previous edition
DIN 55990-3: 1979-12.
National Annex NA
Standards referred to
(and not included in Normative references)
DIN EN ISO 787-10 General methods of test for pigments and extenders Part 10: Determination of density
using a pycnometer (ISO 787-10:1993)
DIN EN ISO 15528 Paints, varnishes and raw materials for paints and varnishes Sampling
(ISO 15528:2000)
DIN ISO 8130-2
Coating powders Part 2: Determination of density by gas comparison pyknometer
(referee method) (ISO 8130-2:1992)
Document comprises 5 pages.
!,cZl"
07.05
9645573
Page 1
ISO 8130-3:1992
Coating powders
Part 3: Determination of density by liquid displacement pyknometer
Page 2
ISO 8130-3:1992
Page 3
ISO 8130-3:1992
Page 4
ISO 8130-3:1992