Electronics : TL/TLS & PLL Lamps
ear
EB-Performer Ballast with APFC
Sim, ight weight, HF elecronic ballast for TLDIPLLITLS lamps with
constant ight outputirespective ofmains voltage fluctuation,
Features and Benefits
1 Smart power constant ight output from lamp imespective of mains
luctuation
+ Programmed start givesmore than 15 lamp switching
+ Up to 258% reduction in energy consumption at similar Luminous Mh
comparedte conventional gear
+ Power factor of0.99 with Active Power Factor Correction (APEC)
+ Endoflamglifeprotection cr
Applications
+ Highend ofice buldings
+ Departmenralstores, supermarkets
+ Industrial premises
The constant light output and the warm start feature ofthe product allows
{to be usedin areas where agood lighting ambience andlonger amp ifeis
Dimensional
Drawing
cs
i
Dimensions in mm
Dimension Data
Te. a a
EBPT Tae 30 a
FBPISG 2a 307 3
ia 7a 20 a
BPI 2H 20 3
eco 30 3
34 20 3
a 30 er
Fes
‘Compliances and Approvals,
Re <30 Me
i >30 MHz EN 55022
Harmonies EN 61000.
Irnmunity EN 61547,
Safety EN 6134723,
Performance EN 60923
C6826 Fe
29
Safety ma
CE marking
fon and bump tests
Approval marks
PHILIPSFluorescent Electronic Ballasts
EB-PERFORMER BALLAST WITH APFC
Technical Data
Ballast Oyo Lamp System Mae.) Lamp
Lamps Type Power Degree cenugrade Power
No. wares Wares
BP 136 1 36WTLDIPUL 36 % By
tap 236 2 36W IL-DIPL m 6 6
rap 336 3 26W TLD na a 9
BP (28 1 dewT1s 2 % 28
ap 228 2 2ew 1s a 5 86
ap 414 4 law Ths 1 6 56
ap 754 2 Saw TIS: 129) w ir
Ordering Data
Blast Ordering No. Single uit Wien NecWeighe Carton Box Volume Weight
mension Diagram vie dimension (Gress)
Lewch y hewch
a pos om m3 cs
FBP I36 (71100558 25@xG003 Fes: 10 790321 0x60. 0003 2B
EP736 2110824325008 Fg? 19 266X!59K62 003 26
Fapas 2110245 eH Fe lo 2a 8x20x62 2003 28
FaP 28 21100559 25@G0308 Fes 10 266XI59X62 003 a
FBP78 (21100556 25830309 Fez 0 266159%62 0003 26
FAP a4 (211078 258X403 Fea 10 2R8%21.0X62 003 28
FAPI54 21108245 2smaoCe Fe 10 266XIS9X62 003 25
EB Performer
‘Technical Data for Installation
Mains operation
Rated mains voltage 220-240
With tolerances of performance: +6% - 8 202-254
With tolerances for safety: 110% 138 -264V
Mains Frequency 50160 He
‘Operating Frequency Dad Ke
(a5 Kr)
Power factor 039
Total Harmonic Distortion <10%
DiC volkage operation cng emergency back-up
Required battery voltage for guaranteed ignition 198-254 V
Required battery voltage for burning amos 76-254
[Nominal light output is avaliable at DC Voltage
Notes
I. For a continuous DC operation an extemal fuse should be used in the
luminave
2. Continuous low DC voltages (<198\V) can influence the lifetime of the
bales.
Earth leakage current TBO
lgrion time |S sec
Constant ight operation In case of mains voltage fuctuations
within 202 - 254 V the luminous fx
changes by maximum of £2%
‘Overvoltage protection 4B hrs. at 320
Ds, at 350
Dual fture: master-slave operation
Cable capacty |30pF
‘Automatic restart after Yes: tested with @ cp down to
replacement or vokage dip 30% with & duration of 10 mains cycles
Insulation resistance test 500 VDC from linelneutral to earth =
{not between Line and Newird)
Note: Ensire thatthe neutral is reconnected again after the above
mentioned testis caried out and before the insaltion put into
operation,Electronics : TL-D Lamps
HRP uTLD Bt
at
Dim
Type
HEP TaaeTLDEL
HEPTENIOTDEL
HEP 31877 OE
2s
7
265
Dimensions in mm
7a
a0.
730,
HF-PERFORMER Ell
uueney electronic ballast for TL-D fuorescent
Slr, Fight weight, high
Featuresand Benefits
+ Programmed sare warm start crcut preheating the lamp electrodes:
this enables the lamps to be oni n and off without reducing
longer larap if than with conventionallbalasts
+ Up to 25% reduction in energy consumation at constant luminous fhe
compared with conventional gew
+ Smart power constant ight independent ofrmains voltage Muctuations
+ Unit protected against excessive mains voages and incorrect
connections
+ Automatic stop cicutis activated within fve seco
falure (safety stop); once the lamp has been repia
automaticaly.
the balast resets
Applications
“Typical areas of application indude:
+ Departmental stores shops. supermarkets
+ Suitable for use with nfraredremote control systems
+ Arpons rabvay stations
+ Ouedoorighting
+ Office buildings for example, insurance companies, banks, goverment
minstries
+ Hospitals
+ Hotels
1 Industrial premises
+ Emergency insaltions with VEO! 08 with e-ignition <0,
Installation
Circuit Diagram
fie!
Fig2 Fi
= pe BS
Ta
‘Compliances and Approvals,
REI <30 Mee EN 55015
Ei >30 MHz EN 55022 8
Harmonies EN 6/000:3.2
Irmunity EN 61547,
Safety EN 6134723,
Performance EN 60929
Vibration and bump tests IEC 68.2.6 Fe
662.29 eb
“Temperature decared thermally 1eC6i 347-1
«
<&
a
PHILIPSTechnical Data
Fluorescent Electronic Ballasts
HF-PERFORMER I! TL-D
Balase Oyo Lamp system Input Lamp Ballast ei
Lamps Type Power Current Power Losses
w A w
HEP 118 TLD Et 1 TLD ew 9 099 16s. a
HEP 2IB TLD El 2 To IEeWw 7 alg 65 a
HEP 3418 TLD EI 3 TLD Iew 54 025 6s: a
we 3418 TOG 4 TLD ew 0 033 60 a
HEP 136 TLD El i TLD x6 7 ale 340 a2
HE? 236 TLD el 2 TLD 36 W. 70 03) 330 A
Ordering Data
tase Wiehe 9. Box Dimensions Volume Weighe
Nec per Box Dewach n Gross
ke. am e
HRP LiaTLD el oz 2 308x206 x87 005 23
HrPziaTLDal 025 2 5328 «206 «87 005 32
HP 3/8 TLD oh 029 io 328 x21 «87 0005 3
HEP 136 TLD El 023 2 328 «20687 005 30
HEP 236 TLD el on 2 228x206x87 005 30
‘Technical Data for Installation ‘Technical Data for Design and Mounting HF Ballasts
Mains operation in Fixtures
Raled mains volage 220-240 Temperatures
With tolerances for performance: +4%-8% 202-254 ‘emperature range to ignite amp 25° to 450°C
With tolerances for safety +1 10% 98-264 with ignition aid
Mains frequency 50460 Hz Max tease °C
‘Operating Fequency (typical) D42 ke fecme of balast depends on the temperature of the ballast This means
(5 ke) ‘thereisarelation between the Teportton thebalast and tslfetrn.
Power factor 2086 Jumandnoize evel inaudible
DC voltage operation during emergency back-up Permitted huridyistested according to N61347-I par
Yes for limited time (48 hrs) enly [Note that no moisture or condensation may enter the bala
Required battery votage for guaranteed igtton 198 -254.V he balsts that are thermaly protected use a protective method of
Required battery voltage for burning laps 75-254 an provicing equvalent
Nominal ight output is obtained atthe
OC walage of 220-240
Notes
I. For a continuous DC
the luminare.
2. Continuouslow DC valages (<198 V) can infuence the lietime of the
balas:
Earth leakage current
lgrivon time
Constant ight operation
«ation, an external fuse should be used in
<05 mA per balast
In case of mains wokage
‘uctuations within 202 - 254,
the luminous fux changes by a
maximum of 42%
48 ors. at 0V AC
hrs. at 350 VAC
Possible, in genera a maxima
of Im of lamp wires between
bala and lamp « alowec
Max 200 pF between lamp wires
and earth
EM precautions have to be taken
Yes testec with a dp down to
30% with a duration of 10 mains
oyces
500 V DC from both mins
inputs to Earth (aot berween
Line and Neutra)
‘Qvervohage protection
Dual fare; master slave operation
le capacity
or votage dipElectronics : TLS Lamps
HEP (Flag) TLS El
ED
350
ay 7
EE
360
HEP (1411S /HE-P 214715 /HE-P 128 15
425,
HEPII4TIS/HEP 414715 /HEP 228 TS
Dimensions mm
HF-PERFORMER (Flat) TLS Ell
Light wei
shih Frequency electronicbllasts for TLS fluorescent lamps.
Featuresand Benefits
+ The combination of HE-PERFORMER and TLS lamps offers
‘sppertunities for minatureation and recuces cost ef ownership, thanks
to thelimized mensions andhighsyster efficacy
+ Warm start circuit enables the lamps to be switched on and off without
reducing use life
+ Lowenergyconsumstion
+ Uni is protected ‘against excessive mains vohages and incorrect
‘connections wth uniform ightindependent of mains voltage fluctuations
+ Automatic stop crete activated within fve seconds in ase of lamp
‘alure (safety stop): once the lamp has been replaces, the balast resets
aucoratically
Applications
+ "Departmental stores, shops, supermarkets
1+ Suitabe for use wh infrared remote contral systems
+ Aon, ralvay stations
+ Office buldngs, hospitals hotels
+ Emergency installations with VDE 0108 with regrition <05s
+ Sutabe for use wn infrared remote contral systems,
Installation
‘on wiring is greatly simplified by the use of insert contacts
Circuit Diagram
r
BALLAST
le K
No.
Fe! nePieTis/Hre 1147s
HF
Ley BALLAST
et
Ne
Fel HeP22e TLS /HFP 214 75
‘Compliances and Approvals
Ri <300Mh2 ENS5OI5
RE >30MHe EN55022.4
Harmonies 61000:3-2
Irnmunity 61547
Safety 6134723
Performance EN 6092916
Vibration and bum tests EC 6B-2.6FCIEC 8.2.29 Eb
Quality standard '50 9000-2000
Environmental standard 0 14001
Approval marks eC
VDEEMV
CE marking
Tempersturedeciarecthermally EC 61347-1
protected
PHILIPSTechnical Data
Fluorescent Electronic Ballasts
HF-PERFORMER (Flat)
Bale Qy.f Lamp System Inpue Ballas Power EI
Lamps Type. Power Current Losses Factor
w A w
1 TISHE LAW) 8 08 26 ost a
2 TSHE aw 2 ols 28 095 a2
HEP 1435T1SHE EI | TSH IEW 3 015 35 098 a
FPIMISTISHEEN 2 TS HE26 Ww a 027 2 50. 099 a2
Ordering Data
alse Weight y. Dimensions Volume Weighe
Nec per Box Dewan Grose
he am a ie.
HEP 1 1435115 HEE 075 D 408 208 x87 0074 3
p2 14-35 TLS HE EH 03) 2 402x208 87 00090 40
‘Technical Data for Installation
Mans operation
Rated mains votage
with tolerances for performance +8% -8%
Mans Frequency
(Operating Fecuency
Power facto
DC voltage operation during emergency back-up
Required battery voltage for
‘guaranteed igivon
Requrec battery voltage for buming amps
Earth leakage curent
Ignition time
Constant ight operation
Dual fore; master-slave operation
Lamp wiring for HF-P 128 TLS
Overveltage protection
Asomatic restart ater lamp
replacement or voltage cp
Insulation resistance test
Note: Ensure thatthe Neutral is reconnected again after above
rertoned tei carried out and before the instalation pu into
229-240 operation
(230 - 240 V)* "Values for 2x 14. W
198-264
207-264 Wye
302-7254
(212-254. vy
0/60 He
24-31 kee
(33-43 eye
0.93 ypical
(093 typeca)>*
Incase of mains vokage
fluctuations within
202 - 254 V, the luminous
flux changes by a maximum
of 2%
(not applicable to 2x 14 W)
Not aevsable
Its ackised to use 500 V
rates
‘Components with HE
Performer TLS
48 brs. at 320 VAC
2D hes at 350 VAC
(2x 14 We balast
switehes ofa
320 Vwithout damages:
higner vohages wil
7 ballast)
with a duravon of
10 mains cyles|
00 V DC From
LnelNeural to Earth
(not between Line and
Neural)Electronics : PL-T/C Lamps
Wy
Wy
HRP PL-TICIQ
DI
i
Al
Dimensions in mon
Te. er 515
e515
HEP 2647 TIE e575
BRPO13 PLTIC. 7
ae
iret ee
Br
a5,
45,
a5
a5
a5
a5
HF-PERFORMER PL-T/C
‘Compact, light weight high frequency electronic standare ballasts for
PLT andPL:C compact fluorescentlamps,
Features and Benefits
+ Flckerfree warm start, idea! for areas with high switching frequency
+ Upto-508 longer lamp life than with convent onal balacts
+ Up to 25% reduction in energy consumption at constant luminous hx
compared with conventiona gea
+ Constant lghtindependentof main voltage fuctuatons
Applications
+ "Departmental stores shops, supermarkets
+ lasaltions with infaredremote contr systems
+ Airports, railway stations
+ Oficebalcings
+ Hosp
+ Hote's
+ Outdeorlghtingand downlghtng
Installation
+ Connection wiring i greatly simplifed by the use of insert contacts
Circuit Diagram
a
HF BALLAST
Fe! Te
Fig 2 Tee
Fig 3 Te
fee oe
‘Compliances and Approvals
30MHe ENSSOIS
Harmonies £N6 100032
Irnmunity ENGIS47
Safety ENGIM723
Performance EN60929-16
Vibration andbump tests IEC 88.2.6 FCIEC 682-29 BD
Qualtystandard 53000-2000
Environmental standard Iso 1400)
oval marks ENEC
CE marking
Temperaturedediedthermally EC 61347~
PHILIPSTechnical Data
Fluorescent Electronic Ballasts
HF-PERFORMER PL-T/C
Bale Qy.of Lamp Sytem Inpue falar Power El
Lamps Type Power Corre Loses Factor
w a w
HEP 113 PLTIC 1 PuTIC IAW “4 06 20 06
#7213 PLTIC 2 PLTIC 13 WW 02 40 07
HEP IIB PLTIC 1 PLTIC IaW 09 is 03k
9218 PLC 2 PIC 18 W oa a0 0% a
HEP I2642PLIC 1 PLTI6W oa 20 os a
MEPm6aFTIC 2 ALT 26W on 30 06 A
HEP I6<2PLTIC 1 PTW 07 30 r)
W92262PC 2 7 030 40 07 AD
HEP I262PLIC 4 om a0 os a2
WP22640°C 2 2 ous 60 2
HEP 113 PLTIC 1 PLC IOW 2 0s 20 06a
#69213 PLTIC 2 Puc 1OW 2 o 40 09s AD
Ordering Data
Balase wee ay. Dimensions Volune Weide
Net per Box ewch Gross
e ‘om « “e
HEP 113 PLTIC ais % 215210215 55
W118 PLTIC 013 2 221 «217 x68 8
HEP 126-42 TIC a3 2 mai x217 «08 le
FP 213 PLTIC % 224224720 73
HEP 218 PLTIC 36 255 245 «225 os
#922642 PL TC 022 2 255 x 245 x62 as
‘Technical Data for Installation Insulation resistance test 500 V DC from
Mane operation nefNewval to
Rated mains votage rth (net beteen Li
vith tolerances for safety 10% and Neutra)
‘with tolerances for performance +6% 8% sare thet the Nevralis
Mans feaucne reconnected agin ate
Opening feazency above test scared out
Power facor ne be‘ore operston
Suitable for OC voltage operation curing emergency back-va
Nomina! ight outputs obtaned sa
vokage of ao v DC
Notes
I. For a continuous DC appliation, an extemal fuse should be used inv
lumnare.
2. Continous low DC vokages (<198 V) can intuence the lifetime of the
bata
Smarepower:
‘Constant ligt operation
Earth leakage cun
lgntin time
Overvottage protection
Dual fixture; master-slave operation
Aaromatic restart ater lamp
replacement or votage dip
in case of mains vokage
Aucuations within
202-254 V, the luminous
fax changes by &
maximum of £ 2.%
05 mA pee balast
<12s(<23)
48 hrs at 20VAC
his at 350 VAC
Qbes a 320V AO)
No
Yes tested with a dp
down to 30% with a
‘duration of 10 mains