A simple explanation of how to properly handle Timbron interior mouldings at the distribution facility warehouse. Also included are a few tips to make the pack out process a bit easier.
A simple explanation of how to properly handle Timbron interior mouldings at the distribution facility warehouse. Also included are a few tips to make the pack out process a bit easier.
A simple explanation of how to properly handle Timbron interior mouldings at the distribution facility warehouse. Also included are a few tips to make the pack out process a bit easier.
Packout Instructions Please be advised that effective Jan 1, 2010, Timbron International has begun shipping sixteen foot lengths of the 623 Colonial Baseboard, 356 Colonial Casing, 105 Quarter Round and 127 Base Shoe. After speaking with several distributors across the United States, we've compiled a short list of steps when unpacking the Timbron product from a newly arrived unit
The best method we’ve found is to angle
the product bundle so the front end of the bundle can be slid into the vertical stack. Then the bundle should be lifted and pushed forward allowing the material to glide against the bundles behind it.
This acts as a ramp for loading bundle to
slide against, using it as a guide. This method keeps the loading bundle from excessive sag while reinforcing the loaded bundle against the materials already loaded.
Occasionally
IF you should find that the
end you are loading displaces because of the band, causing a bunch up......
THEN you need to flip the
bundle over so that the band slides back allowing the The product should be bundle to reset to its orginal able to rest against a position. wall without bowing over.