Professional Documents
Culture Documents
KULLIYYAH OF ENGINEERING
MCT 3214 Design of Machine Elements
Semester 1 2015/2016
Assignment 1
1. Identify the components indicated on the machine shown in Fig. 1 (a) and (b).
(a)
Semester 1 2015/2016
(b)
Fig. 1
2. A 80 kg lamp is supported by two rods AB and BC as shown in Fig. 2. If AB has a diameter
of 10 mm and BC has a diameter of 8 mm, determine the average normal stress in each
rod.
Semester 1 2015/2016
Fig. 2
3. The two members are pinned together at B as shown in Fig.3. Top views of the pin
connections at A and B are also given in the figure. If the pins have an allowable shear
strass of allow = 90MPa and the allowable tensile stress of rod CB is allow = 90MPa
determine the smallest diameter of pins A and B, and the diameter of rod BC necessary to
support the load.
Fig.3
Semester 1 2015/2016
4. The steel bar as shown in Fig. 4 is made from 2 segments, AB and BD, having cross
sectional areas of AAB= 600 mm2 and ABD=1200 mm2. Determine the vertical displacement
of end A.
Fig.4
5. An aluminium rod of 0.6 inch in diameter and 50 in long and a steel rod of 0.3 inch in
diameter and 20 inch long are spaced 80 inch apart and fastened to a horizontal beam that
varies a 2000 lb load as shown in Fig. 5. Evaluate whether the beam remain horizontal if
x=45 in. Justify your answer.
90 inch
Fig. 5
Semester 1 2015/2016
6. The steel rod shown in Fig. 6 has a diameter of 5 mm. It is attached to a fixed wall at A,
and before it is loaded, there is a gap between the wall at B and the rod of 1 mm.
Determine the reactions at A and B if the rod is subjected to an axial force force of P= 20
kN as shown. Neglect the collar size at C. Take the Young Modulus of steel, E=100 GPa
Fig. 6
Semester 1 2015/2016