Professional Documents
Culture Documents
3. From Setup > Design, the relationship between Lambda and Microns is shown.
place where is violate the design rule. It is a good idea to run DRC at each stage of your
design so that you can fix any error along the way
3. Draw Active.
4. Draw Poly.
contacts
STEP 5 Draw VDD and GND
STEP 7 Connections
1. Connect Poly of PMOS and NMOS.
2. Connect source of PMOS to VDD by Metal 1.
3. Connect source of NMOS to GND by Metal 1.
4. Connect Drain of PMOS and NMOS by Metal 1.
5. Add an input connect between Metal1 and Poly.
STEP 8 Label
Label the INPUT, OUTPUT, VDD and GND using
button.