Professional Documents
Culture Documents
MEMB453 UT Quiz 2015 s1 Take Home
MEMB453 UT Quiz 2015 s1 Take Home
3. An oscilloscope display in which the screen base line is adjusted to represent the
one way distance in a test piece is called a:
1 of 4
MEMB453
5. In ultrasonic testing, a liquid coupling medium between the crystal surface and the
part surface is necessary because :
6. All other factors being equal, which of the following modes of vibration has the
greatest velocity?
2 of 4
MEMB453
10. When an ultrasonic beam passes through the interface between two dissimilar
materials at an angle, a new angle of sound travel is formed in the second material
due to:
11. The ability to separate echoes from reflectors close together in depth is called:
12. Acoustic energy propagates in different modes. Which of the following represent
a mode?
15. In steel, the velocity of sound is greatest in which of the following modes of
vibration?
3 of 4
MEMB453
You are given with 10 in calibration block. Sketch the A-scan display for the following
UT test that given the best result; indicate your calibration A-scan signals. Explain
your answer.
4 of 4