Professional Documents
Culture Documents
HiTEC 536
Rust Inhibitor
COMPONENTS
Performance
0.10
0.05
Rust protection
Water separation
Enhanced oxidation stability
Multifunctional - useful in many different lubricants and
grease applications
Pass
Pass
Pass
Pass
Recommended Dosage
0.14
0.08
Pass
Pass
Pass
Pass
The recommended treat rate for HiTEC 536 is 0.05% to 2.0% wt.
depending upon the application. Please contact your Afton Chemical
representative for specific recommendations.
Typical Characteristics
Handling Information
Appearance
Dark red-brown viscous liquid
Density, lbs/gal. 7.75
Specific Gravity @ 15.6/15.6C
0.930
Viscosity @ 100C, cSt
39
Flash Point, C (PMCC)
110 min.
2011. Afton Chemical Corporation is a wholly owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC is a trademark of Afton Chemical Corporation. 07/11.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.