Professional Documents
Culture Documents
Kuvempu Univeristy BSC IT 4th Semester Algorithm 41
Kuvempu Univeristy BSC IT 4th Semester Algorithm 41
1. ___________ is the process of executing a correct program on data sets and measuring the time and space it takes to
compute the results?
Ans. Profiling
2. Define algorithm? What are its properties?
Ans.
An algorithm is a set of instructions that provide step-by-step specifications to perform a task.
The properties of an algorithm are:
Input: Specifies the data set that is applied to the algorithm to check its validity.
Output: Specifies the data set that is produced as a result of the algorithm execution.
Definiteness: Specifies that the instructions described in the algorithm should be well
defined and should not create any ambiguity.
Termination: Specifies that the instructions described in the algorithm must contain a
proper termination condition.
Effectiveness: Specifies that the algorithm take less time and less memory space during
its execution.
Bangles in a hand: The bangles wore in a hand follow last-in-first-out (LIFO) strategy of
stack. The bangle that you wear first is the last one to be taken out while removing all the
bangles from the hand. The bangle that is worn last is the first one to be taken out.
Same circumference circular rings in a pole: The rings having same circumference
placed into a pole also follow LIFO strategy. The topmost ring, which was the last to be
placed in the pole, is the first one to be taken out.
Sacks full of wheat placed one over other: The sack at the top is removed first and the
sack at the bottom is removed last.
The bolts screwed to a single nut: When the bolts are screwed to a single nut, the last
screwed bolt is unscrewed first and the bolt that was screwed first is unscrewed in the last.
Battery cells in a torch: The battery cells in a torch also follow the same LIFO strategy of
stack.
A queue of people at ticket-window: The person who comes first gets the ticket first. The
person who is coming last is getting the tickets in last. Therefore, it follows first-in-first-out
(FIFO) strategy of queue.
Vehicles on toll-tax bridge: The vehicle that comes first to the toll tax booth leaves the
booth first. The vehicle that comes last leaves last. Therefore, it follows first-in-first-out
(FIFO) strategy of queue.
Phone answering system: The person who calls first gets a response first from the phone
answering system. The person who calls last gets the response last. Therefore, it follows
first-in-first-out (FIFO) strategy of queue.
Luggage checking machine: Luggage checking machine checks the luggage first that
comes first. Therefore, it follows FIFO principle of queue.
Patients waiting outside the doctor's clinic: The patient who comes first visits the doctor
first, and the patient who comes last visits the doctor last. Therefore, it follows the first-infirst-out (FIFO) strategy of queue.
3. Name 10 situations that can be represented by means of graphs. Explain what each vertex and edge represents.
Ans.
The situations that can be represented by means of graphs are:
Example
Vertex represents
Edge represents
Displacement
Position or state
Shortest Path
City
City Map
Air route
Different airports
In mathematical
expressions
Value
Daily temperature
report
Temperature for a
specific time
Child-parent
relationship
Relationship
Organization chart
Designation
Order or flow
Chemical structure
Chemical elements
4. Draw a connected graph that becomes disconnected when any edge is removed from it.
Ans.
The following figure shows a graph that becomes disconnected when any edge is removed from it:
Disconnected Graph
For n=2
For n =3
There can be a number of trees with 3 labeled vertices. Some of the examples of the trees with 3 labeled vertices are:
For n=4
Again, there can be a number of trees with 4 labeled vertices. Some of the examples of the trees with 4 labeled vertices
are:
For n=5
Again, there can be a number of trees with 5 labeled vertices. Some of the examples of the trees with 5 labeled vertices
are:
7. Write adjacency and incidence matrix for all the graphs developed.
Ans.
The following tables show adjacency and incidence matrices for the graph of question no. 4:
2. Design and develop an algorithm for finding the middle element in three numbers.
Ans.
To find the middle element one has to first sort the numbers in ascending order. The smallest number
element in the sorted list and the largest number becomes the last element in the sorted list.
else
m=b
end if
end if
3. Develop an algorithm to find the number of Permutations and Combinations for a given n and r.
Ans.
Permutation of a given number is given by n*(n-1)*(n-2)...up to r factors.
This is a generalized algorithm for n>2
Algorithm: Permutation of a number for a given r
Input: n and r
Output: Permutation of n
Method:
a) per = 1
for (j = n to n - r + 1 in steps of -1 do) //where j is a loop variable
per = per*j
end_for
Display ' Permutation = ', per
b) Combination of a number n for a given r is calculated by
nCr = nPr / r!
Calculate the permutation nPr using the above algorithm
Calculate the factorial for r using the algorithm
fact = 1
for (j =1 to r in steps of 1 do) //where j is a loop variable
fact = fact*j
end_for
comb = per / fact
Display ' Combination =', comb
4. Design an algorithm to generate all prime numbers within the limits l1 and l2.
Ans.
Algorithm: to generate all prime numbers between the limits l1 and l2.
Input: l1 and l2
Output: Prime numbers between l1 and l2
Method:
for (n=l1 to l2 in steps of 1 do)
prime=true
for (i=2 to n/2 in steps of 1 do)
if (n % i =0)
prime = false
break
end_if
end_for
if (prime = true)
Display 'Prime number is =', n
end_for
5. Design an algorithm to find the reverse of a number.
Ans.
Algorithm: Reverse of a number
Input: number
Output: Reverse of a number
Method:
new_number = 0
6. A number is said to be a palindrome if the reverse of a number is same as the original. Design an algorithm to check
whether a number is a palindrome or not.
Ans.
Algorithm: check whether the number is a palindrome or not
Input: number, flag
Output: number is a palindrome
Method:
count = 0
while (number > 0)
n = number%10
a(count)=n
count = count+1
end while
half = count/2
palin = true
for (j=1 to half in steps of 1 and k=count to half in steps of 1 do)
if (a (j)! =a(k))
palin = false
break
end if
if (palin = true)
Display 'Number is a palindrome'
else
Display 'Number is not a palindrome'
end if
end for
7. Design an algorithm to check whether a given string is a palindrome or not.
Ans.
Algorithm: check whether the string is a palindrome or not
Input: string, flag
Output: string is a palindrome
Method:
count = 0
while (the next character ch in the string is not empty)
a(count) = ch
count = count+1
end while
half = count/2palin = true
for (i=1 to half in steps of 1 and j=count to half in steps of 1 do)
if (a (i)! =a (j))
palin = false
break
end if
if (palin = true)
Display 'String is a palindrome'
else
Display 'String is not a palindrome'
end if
end for
8. Implement all the devised algorithms and also the algorithms discussed in the chapter.
Ans.
You can implement algorithms discussed in this chapter in various languages, such as C++ and Java. However, you need
to know the syntax of the respective language before implementing it.
2. Consider a data set of nine elements {10, 30, 45, 54, 56, 78, 213, 415, 500} and trace the linear search algorithm to find
whether the keys 30, 150, 700 are present in the data set or not.
Ans.
In linear search algorithm, each element in the list is compared with the given key element. If any of the elements in the
list is equal to the given key element, the linear search algorithm returns TRUE, else it returns FALSE.
Let us apply linear search to find the key element 30 in the given list.
Take the first element 10 from the list and compare it with the key element 30. Clearly the
two elements are not equal.
Take the next element 30 from the list and compare it with the key element 30. Clearly, the
two elements are equal. The algorithm returns the TRUE value, and the algorithm is
terminated.
Similarly, search for the key elements 150 and 700. At the end of the search, you will find that the key elements 150 and
700 are not found in the list.
3. Trace the binary search algorithm on the same data set and same key elements of problem 2.
Ans.
Binary search algorithm can be applied only to the sorted list of elements. Lets first apply the binary search algorithm to
find the key element 30 in the following list taken from problem 2:
Take the middle element from the list and compare it with the key element. Clearly, the middle element 56 > key element
30. As the key element is smaller than the middle element, the key element can only be present in the left sub list that is
as follows:
Again, take the middle element from this list and compare it with the key element. Clearly, the middle element 45 > key
element 30. As the key element is smaller than the middle element, the key element can only be present in the left sub
list that is as follows:
Again, take the middle element from this list and compare it with the key element. Clearly middle element 30= key
element 30, therefore, the binary search algorithm returns a TRUE value and the algorithm is terminated.
Similarly, search for the key elements 150 and 700. At the end of the search, you will find that the key elements 150 and
700 are not found in the list.
4. Try to know more sorting techniques and make a comparative study of them.
Ans.
There are various sorting techniques, such as bubble sort, quick sort, and shell sort. Each of these sorting techniques is
defined as follows:
Bubble sort: In the bubble sort technique two elements are compared at a time and if the
two elements are not in ascending order these elements are interchanged. This process is
repeatedly performed throughout the given list until the list is completely sorted. To sort a
list of n elements using bubble sort you need to make a total of (n-1)2 comparisons.
Quick sort: The basic idea underlying quick sort is to allow a specific element 'a' within the
list 'x' to find its proper position 'j'. The proper position 'j' is found such that it satisfies the
following two conditions:
The elements on the left hand side of position 'j' are all smaller than or equal to 'a'
The elements on the right hand side of position 'j' are all greater than or equal to 'a'
If 'a' satisfies these two conditions, then 'a' is the jth smallest element in the list and 'a' is placed at jth position in the finally
sorted list. This process is then repeated for sub arrays x [0..j-1] and x [j+1..n-1].
Shell sort: In shell sort, the given list x is divided into sub lists containing every kth element
of the given list. For example, if k=5 then one sub list contains x [0], x [5], x [10]..., another
sub list contains x [1], x [6], x [11]..., and so on. The elements of these sub lists are then
compared two at a time and if the two elements are not in ascending order, these elements
are interchanged.
Now, a new value of k is chosen which is smaller than the previous value of k and the process is repeated again. This
process is repeated until the value of k is set to 1 so that the sub list consisting of the entire list is sorted.
5. Hand simulate Insertion Sort on the data set {13, 45, 12, 9, 1, 10, 40}
Ans.
Let us apply Insertion Sort algorithm on the given list:
Note
The figure 4.1 given on page 41 of the book is incorrect. It shows the steps for
straight selection sort.
2. Trace out the algorithm Quick Sort on the data set {12,1,5,7,19,15,8,9,10}.
Ans.
Steps to perform Quick Sort on the data set{12,1,5,7,19,15,8,9,10} are:
{(12),1,5,7,19,15,8,9,10}
{(12),1,5,7,10,15,8,9,19}
{(12),1,5,7,10,9,8,15,19}
{8,1,5,7,10,9,(12),15,19}
{(7),1,5,8,10,9}{12}{(15),19}
{5,1,(7),8,10,9}{12}{15,19}
{(5),1}{7}{(8),10,9}{12}{15}{19}
{1,(5)}{7}{(8),9,10}{12}{15}{19}
{1,(5)}{7}{(8),9,10}{12}{15}{19}
{1}{5}{7}{8}{(9),10}{12}{15}{19}
{1}{5}{7}{8}{9}{10}{12}{15}{19}
4. Trace out the algorithm MaxMin on a data set consisting of at least 8 elements.
Ans.
3. What is the maximum number of nodes in the binary tree of level 7, 8, and 9?
Ans.
The maximum number of nodes in the binary tree is calculated by 2l+1 - 1 where l is the level of the binary tree.
The maximum number of nodes for level 7, 27+1 - 1 = 255
The maximum number of nodes for level 8, 28+1 - 1 = 511
The maximum number of nodes for level 9, 29+1 - 1 = 1023
4. What is the wastage of memory for a binary tree with 16 nodes represented in a 1D array, 2D array, and a linked
representation?
Ans.
a) For a 1D array, the formula for calculating percentage of memory utilization is:
(n -1/2l+1 - 1)*100 where n represents the number of nodes and l represents the depth of the tree. However, in the given
question, the depth has not been specified. Therefore, the percentage memory utilization cannot be calculated.
b) For a 2D array, the percentage of memory utilization is:
(n -1/n2)*100 = (16 -1/162)*100 = 5.86%
Therefore, the wastage of memory in 2D array is 100 - 5.86 = 94.14%
c) For a linked list, the percentage of memory utilization is:
(n -1/2n)*100 = (16 -1/2*16)*100 = 46.88%
Therefore, the wastage of memory in 1D is 100 - 46.88 = 53.13%
5. For at least 5 binary trees of different depths greater than or equal to 6 of your choice, obtain the preorder, postorder
and inorder sequences.
Ans.
The following figure shows a binary tree with 14 nodes where A is the root node: