All : usedto measuredistancewith recording Dist : usedto measuredistancewithout recording Dsp : to displaysomethingon screen Prog : to selectthe programtype of the work (explainedbelow ) Code* : to selectthe codetype of the data Cont: to continue Menu : to enterthe menuwindow ( explainedbelow ) Esc : to escapefrom currentwindow and go back Rec : to savethe measureddata NR : to selectthe numberingtype Example: Running:1,2,3,4,etc Individual: 1,3,5etcor 2,4,6 etc Rep : to repeatdatameasuring( for check) Enter : to enterthe requirednumberby key board Stop : to stopthe currentoperation CE : to clearthe enterednumber ON : to switchon the instrument OFF : to switch off the instrument Menu : it containthe following windows : Set : to enterthe requiredinformation l- HZo: makingthe Hz angle: 0 2- Eo , No : enteringthe eatand north coordinates 3- Ho , Hi : enteringthe height of point andheight of instrument 4- Hr : enteringthe height of reflector Data : to edit the data 1- File NR : to selectthe requiredfile number 2- View : to seethe requiredfile 3- Find : to find the requiredfile 4- Format* : to format the requiredfile 5- Erase: to deletethe requiredfile Rec : to recordingdata 1- Selectmask* : to selecta specifiedmaskfor datarecordins 2- Definemask* : to edit a specifiedmask for datarecordins-
3- Port *: to selectthe requiredport for datatransferringfrom instrumentto
computeror to disk reader 4- File : to selectthe requiredfile for datarecording Conf *: to selectthe configuration 1- Prog : to edit the programconfiguration of the work 2- Code:to editthe codeof data 3- EDM : to do correctionsfor distancemeasurement 4- Units : to changethe units of measurement 5- ON-OFF : to changethe modeof on-off switch Test : to testthe instrument 1- Batt/Temp: to test or measurethe batterystrengthor temperature 2- Index* : to find or enterthe index of th. instrument "rro, 3- Colim* : to find or enterthe collimation error of the instrument 4- Display : to changethe displaymodeof the instrument 5- System*: to changethe systemof the instrument 6- Signalx: to changethe signalstrengthof the instrument 7- Frequency*: to changethe wave frequencyof the instrument
Freestation: to work on free stationmode :
1- Pt nr : to enterthe points numberingtype 2-Hi: to enterthe height of instrument Coordinput : to enterthe coordinatesof instrumentpoint 1- Pt nr : to enterthe pointsnumberingtype 2- E, N, H: to entertheeast,northandheightcoordinates Set station: to enterthe coordinatesof instrumentpoint from saveddata or from key boardby hand orientation : to enterthe coordinatesof instrumentpoint from specified point or benchmark Height trans* : to enterthe coordinatesof instrumentpoint from anotherpoint by transfening Tie distance*: to find the distancebetweenany two points Settingout : to setout known points on earthirom thiir coordinates Resectionx: to resectsa distanceor to divide a specifieddistanceto two equalparts * - rarelyusedso try to avoid it ifyou arenot proffesional