Professional Documents
Culture Documents
Safety Catalogue 2010 Lowres
Safety Catalogue 2010 Lowres
Safety Catalogue
ID no. 808001, Printer: AIT Otta, 03.10, 10K, Country of Origin NO.
Safety Catalogue
Products, equipment and services
16.03.10 11.25
Contents
Contents
General information
General information
Fire extinguishers
Portable extinguishers cartridge operated
Wheeled extinguishers
Stored pressure extinguishers
Cabinets for Ext. and Fire Blanket
6
10
12
14
16
18
21
23
26
27
28
31
32
34
36
37
39
44
55
Rescue equipment
Helideck + Safety equipment
Lifejackets, cabinets and light
Immersion suits
Lifebuoys
Cabinets
Rescue tools
Harness belt and fall arrestors
Tripods
Pyrotechnics
Stretchers
IMO Signs and SOLAS Tape
Inflatable liferafts
60
62
65
67
68
70
71
72
73
75
76
84
12-03-10 10:08:55
Contents
Medical
Medical equipment
88
94
Systems
104
106
108
110
112
114
115
118
120
122
124
126
128
132
Service
Safety service made simple
Safety service range
Service network
Fleet agreement
ISO certified
Wilhelmsen Ships Service works according to your
needed standards
134
134
135
137
138
139
Contact information
Contact information
141
12-03-10 10:08:55
General Information
Product name
Product number (9 digits)
Quantity and units
Vessel name
Purchase order number
Contact person
Delivery place
Delivery date
Agent information including phone and fax number
Billing details
The above details will assist us in making sure your order is correctly and efficiently dealt with.
Delivery Expenses
Wilhelmsen Ships Service offers delivery free of charge in many ports around the world.
Exceptions at any port related to the following additional costs:
Hire of cranes, barges, launches etc.
Fees charged to Wilhelmsen Ships Service by third parties e.g. local customs authority taxes etc.
Rush Shipments of products not commonly requested and thus not readily available at that Place
Delivery expenses, where applicable, are advised in our quotations and order confirmation.
Please contact your Customer Service Centre for further details.
12-03-10 12:29:04
General Information
TO LEARN MORE, SEE THE SERVICE SECTION AT THE END OF THIS CATALOGUE
12-03-10 12:29:13
Fire extinguishers
Fire extinguishers
12-03-10 10:09:11
Portable extinguishers
Description:
Product Features:
12-03-10 10:09:16
Portable extinguishers
A CLASS
4
4
55
B CLASS
D CLASS
Higher the
figure = higher
the efficiency
Models
Powder
P6
P6P
P9P
P
PP
P9FM.M
BC
ABC
ABC
BC
ABC
D
B-C
4A-B-C
4A-B-C
B-C
55A-B-C
N/A
Ordering information:
Models
P6
P6P
P9P
P
PP
P9FM.M
C CLASS
Powder
BC
ABC
ABC
BC
ABC
D (metal)
Temperat- Disch.
ure for use
time
- 0C + 60C
s
- 0C + 60C
7 s
- 0C + 60C
s
- 0C + 60C
6 s
- 0C + 60C
6 s
-0C + 60C
7 s
Average Working
Test
CO2
Gross
range pressure pressure cartridge weight
4m
5 bar
6 bar
60 g
Kg
4m
bar
6 bar
0 g
Kg
5m
5 bar
6 bar
60 g
5, Kg
4m
,7 bar
6 bar
80 g
9 Kg
4m
4, bar
6 bar
80 g
9 Kg
m
, bar
6 bar
0,56 l
8 Kg
Argon
Width
(mm)
0
0
0
0
0
40
Height
(mm)
670
670
750
850
850
790
Spare Parts:
Ref.
Description
-
-
-
4
5
5-
6
6
6
6
6
7
7
7
7
7
8
9
0
P
PP
9 668004
9 667584
9 66759
9 667600
9 66795
9 6679
94 66844
94 66844
94 6686
94 6685
9 66764
9 746
9 669655
9 668970
9 66897
9 668954
9 668996
9 668988
94 66877
94 66885
94 6689
94 6680
94 6689
9 668947
9 669697
9 67495
94 669689
12-03-10 10:09:22
Portable extinguishers
Description:
Portable Cartridge operated Foam / Water Fire Extinguishers/Foam for Kitchen Fires
Water : E9 Foam : E9A1 Foam: E6A15EVF (Kitchen)
High fire extinguishing ratings providing improved safety to unskilled users.
Striking handle as the safest method of triggering
Rotating nozzle guarantees optimal position
Fully controllable water/foam flow thanks to the nozzle
Common operating head makes on board training easier
Product Features:
12-03-10 10:09:24
Portable extinguishers
TECHNICAL DATA :
RATINGS
MODELS
E9
E9AEV
E6A5EVF
A CLASS
Models
Type
E9
E9AEV
E6A5EVF
Water
Foam
Foam
B CLASS
F CLASS
44
75
A
7A B
75F
Disch.
time
(Min)
+ 5C + 60C
+ 5C + 60C
+ 5C + 60C
s
7 s
s
Average Working
Test
CO2
Gross
range pressure pressure cartridge weight
4m
4m
m
5,7 bar
, bar
5 bar
6 bar
6 bar
6 bar
60 g
60 g
60 g
5 Kg
5 Kg
kg
Width
(mm)
Height
(mm)
0
0
40
640
640
60
Medium
Water
Foam
Foam
Spare Parts:
Ref.
-
-
4
5
5-
6
7
-
Description
Headcap w/o hose F/E9/E9A w/o cartridge
Valve seal F/P5/P5P/all cart.portable ext. 5 pck
Safety pin yellow F/all cart. portable ext.0 pck
Wire and seal F/all ext.90 pck
Hose w/nozzle and clamping ring FE9/E9A
CO cartridge E9/E9A
Headcap nuts M8 F/all cart. portable ext. 0 pck
Universal M.bracket w/strap F/P6/P6P/P9P/P/PP/E9/E9A
Strap F/M bracket All cartr. Portable ext.
Label F/E9 water ext. 0 pck
Label F/E9A foam ext. 0 pck
Service safety pin 0 pck
Base prot. F/all cart. portable ext.
AFFF foam charge 90 ml. F/E9A
E9
E9AEV
9 7656
9 667584
9 66759
9 667600
9 66768
94 66878
9 66764
9 746
9 669655
9 667667
9 667675
9 669697
9 668947
9 76579
12-03-10 10:09:30
Wheeled extinguishers
Product Features:
Reliability
) CE PED in compliance with pressure equipment directive
) Overpressure release safety design tested by official authorities (DRIRE)
) High quality steel sheet body
4) To avoid the hazard of powder compaction due to ship vibration
all powder extinguishers are equipped with blowing dip tube
5) Rupture disc in the hose to prevent powder leakage and humidity rising
Corrosion Resistance
) Self-supporting high quality sheet steel body
) External protection: primer and polyester coating after shot blasting
) Internal protection: degreasing and passivating (powder version); shot blasting and
epoxy coating (foam version)
4) Corrosion resistance test (tank in salt fog 00 hours, UVA and UVB tests)
5) Safety pin and many accessories in stainless steel
Customer Benefits
Limited amount of spare parts
Universal spare parts for several models
No special tools required
Worldwide servicing through Wilhelmsen Ships Service network with trained and approved staff
Approvals
Technical Data:
Fire Classes
Models
P5
P5P
P50
P50P
E45A
E5A
A Class
X
X
X
B Class
X
X
II B
IV B
X
X
C Class
X
X
X
X
0
12-03-10 10:09:38
Wheeled extinguishers
Technical Characteristics
Models
Class
Capac.
Temperature
for use
Minimum
Disch.
Time
Hose
length
Average
range
Working
pressure
Test
CO2
pressure cartridge
Gross
weight
Width
(mm)
Height
(mm)
P5
BC
5 Kg
- 0C + 60C
s
,5 m
8m
bar
8 bar
450 g
48 Kg
400
900
P5P
ABC
5 Kg
- 0C + 60C
5 s
,5 m
8m
bar
8 bar
450 g
48 Kg
400
900
P50
BC
50 Kg
- 0C + 60C
s
5m
0 m
,6 bar
4 bar
900 g
96 Kg
545
05
P50P
ABC
50 Kg
- 0C + 60C
4,7 s
5m
0 m
,6 bar
4 bar
900 g
96 Kg
545
05
E45A
AB
45 L
+ 5C + 60C
56 s
5m
4 m
4,8 bar
4 bar
450 g
9 Kg
545
05
E5A
AB
5 L
+ 5C + 60C
90 s
5m
4 m
8 bar
4 bar
Kg
Kg
700
400
Ordering information:
Product no.
9 66750
9 67467
9 66759
9 60975
90 66778
90 66786
Model
P5
P5P
P50
P50P
E45A
E5A
Type
Powder
Powder
Powder
Powder
Foam
Foam
Class
BC
ABC
BC
ABC
AB
AB
Spare parts:
Unitor Standard
Description
P5
P5P
P50
P50P
E45A
E5A
n/a
n/a
n/a
n/a
94 6680
94 6688
94 6747
pcs 6684
Powder charge
94 6684
94 6687
9 667899
n/a
n/a
94 66894
94 6680
9 66768
9 667600
9 69074
n/a
n/a
9 667709
Hose 5M F/E45A/E5A/P50/P50P
Rupture disk F/ wheeled ext. 0 pck
9 690750
Discharge Nozzle
9 6679
9 66769
pcs 6747
94 6685
n/a
9 668046
9 66775
n/a
9 667766
9 667758
9 667584
9 667956
n/a
n/a
9 667774
n/a
n/a
9 66778
9 667907
9 667790
9 667808
n/a
9 66786
9 67400
9 66784
9 6748
n/a
n/a
9 6680
9 6757
9 67409
9 668079
n/a
9 68065
9 6678
9 667840
9 6677
12-03-10 10:09:39
Description :
This device was designed using highly reliable materials and the latest corrosion-resisting
protection technologies in order to be ideally suited to the requirements of industrial environment.
It complies with European EN standard, and is of the highest performance in its category.
This fire extinguisher is certified according to Directive 96/98 EC on Marine Equipment.
Permanent pressure
The device is pressurized during manufacture, and undergoes a check using helium to ensure
that it is totally leak-tight over time.
A pressure gauge shows that pressure is maintained over time.
Ordering information
Powder extinguisher Stored pressure without marine bracket
Product no.
Type
Classification
Capacity
Gross
weight kg
Height
mm
Width
mm
9 67594
9 79508
9 7404
9 75548
PP6P
PP9P
PPP
PP5P
ABC
ABC
ABC
ABC
6 kg
9 kt
kg
5 kg
9,
,7
7,05
4,
50
597
60
90
90
80
90
80
Type
Classification
Capacity
Gross
weight kg
Height
mm
Width
mm
9 66794
PPP
ABC
kg
4,7
40
0
Accessories
9 67909
9 7956
9 74
Unitor Co2 Fire Extinguishers Portable : U5C Wheeled : U9C - U22C - U45C
12-03-10 10:09:51
Unitor
Customer Benefits
Models
Type
Capac.
kg
Fire
rating
Temperature
for use
9 66757
9 66754
9 667550
9 667568
U5C
U9C
UC
U45C
CO
CO
CO
CO
5
9
45
89B
- 0C + 60C
- 0C + 60C
- 0C + 60C
- 0C + 60C
Disch.
time
(Min)
0 s
0 s
49 s
97 s
Working
Test
pressure pressure
BAR
BAR
7,8
50
76
50
76
00
76
00
Gross
weight
KG
4
9
80
09
Width
(mm)
Height
(mm)
55
980
00
480
70
070
00
40
Spare Parts:
Description
Seal f/cyl valve conn. 5 pck
Instruction label 0 pck
Valve
Safety pin
Wire and seal F/all ext. 90 pck
Co nozzle w/hose
Co nozzle
Discharge hose
Wheel w/safety pin and washer
Marine bracket w/strap
Strap F/M bracket F/all cart. portable ext./U5C 5 pck
Spare Cylinder
Accessories:
12-03-10 10:09:55
Ordering information:
Cabinet for ext. 6 9kg powder / water
and 5kg CO
Product no. 294 723064
Cabinet for FE 69 kg
94 76688
Cabinet for FE kg
Unitor Fireblanket
Wilhelmsen Ships Service has added to its range of equipment a Fire Blanket
specifically designed and manufactured to the new European Standard for Fire
Blanket.
When removed from the container the blanket is held in the shield position,
protecting the user from the fire. When draped over a fire the blanket starves the
fire of oxygen, leading to rapid extinction.
Fire Blankets can be used to wrap around a person whose clothes are on fire and
can also be used to wrap around a hot or burning object for removal to a safe
place.
Unitor Fire Blanket specifically designed and manufactured to the new European
Standard for FireBlankets.
The Unitor Fire Blanket conforms to EN869:997.
Nett kg
.5
Measurements of container
6 x 6 x ,5 cm (HxWxD)
4
12-03-10 10:10:06
Fire extinguishers
12-03-10 10:10:20
Fire Hoses
Description:
The Guardman fully synthetic fire hose is a result of many years of development within fire hose production. The Guardman hose
is produced in one continuous process where nitrile rubber is forced through a circular woven textile. This gives an inner/outer cover
with good adhesion between textile and rubber.
After vulcanization, the hoses undergo an obligatory pressure test and control, before they are distributed to our customers.
The Guardman quality is approved all over the world and has acquired a position as the fire hose of the future.
Guardman is a wear-and-tear resistant hose which gives a long lifetime under all uses and conditions.
The Guardman is constructed to tolerate almost all conditions; also for purposes beyond fire fighting, for example transport of liquids
in the shipping industry, offshore operations, industry and agriculture.
The Guardman is suitable for climate temperatures from -0 C to +70 C, intermittent use up to +00 C.
App. weight
Gr/m
00
80
50
Description:
The Mertex fire hose is a fully synthetic textile hose, woven of robust polyester yarn and is inside coated with Polyurethane (TPU).
The Mertex is excellent under all climatic conditions, -50 C to +75 C, and has good mechanical properties.
App. weight
Gr/m
90
70
50
Product no.
605
6050
758888
Description
Portable binding machine
Binding bracket for coupling
Binding wire .6mm (kg) stainless steel
Portable binding Machine
6
12-03-10 10:10:27
Fire Hoses
GUARDMAN FIREHOSE: Recommended for Offshore, Chemical and Oil tankers or for extensive use.
MERTEX: Recommended for all other types of purposes.
MERTEX is light weight, easy to handle and is used mainly as regular fire hose.
Approvals:
Guardman
Mertex
MED 96/98
X
X
RMRS
X
X
Ordering information:
Product no.
95 57499
95 574947
95 574954
95 L78649
95 589598
95 L964
95 5077
95 L969
95 L959
95 58964
95 589606
95 5070
95 L979
95 L965
95 5079
95 L8046
Description
Guardman Firehose /" per mtr
Guardman Firehose " per mtr
Guardman Firehose /" per mtr
Guardman Blue waterhose /" per mtr
Guardman /" w/storz C cpl 5 mtr
Guardman /" w/storz C cpl 8 mtr
Guardman " w/storz C cpl 5 mtr
Guardman " w/storz C cpl 8 mtr
Guardman " w/storz C cpl 0 mtr
Guardman /" w/storz 65 cpl 5 mtr
Guardman /" w/nor- cpl 5 mtr
Guardman " w/nor- cpl 5 mtr
Guardman /" w/nor- cpl 5 mtr
Guardman /" w/nor- cpl 5 mtr
Guardman " w/nor- cpl 5 mtr
Guardman " w/nor- cpl 0 mtr
Product no.
95 589580
95 58957
95 589564
95 5896
95 L9676
95 589648
95 758870
95 75886
95 L9646
95 58967
95 L9588
95 58960
95 L9696
95 L960
95 589655
95 589689
95 L95
Description
Mertex Firehose /" per mtr
Mertex Firehose " per mtr
Mertex Firehose /" per mtr
Mertex /" w/Storz C cpl 5 mtr
Mertex /" w/Storz C cpl 8 mtr
Mertex " w/Storz C cpl 5 mtr
Mertex " w/Storz C cpl 8 mtr
Mertex " w/Storz C cpl 0 mtr
Mertex " w/Storz C cpl 5 mtr
Mertex /" w/Storz 65 cpl 5 mtr
Mertex /" w/Storz 65 cpl 8 mtr
Mertex /" w/Nor- cpl 5 mtr
Mertex /" w/Nor- cpl 8 mtr
Mertex " w/Nor- cpl 5 mtr
Mertex " w/Instant. cpl 5 mtr
Mertex /" w/Instant. cpl 8 mtr
Mertex " w/Instant. cpl 0 mtr
7
12-03-10 10:10:28
Fire couplings
Description
Storz C cpl w/ /4" Hose Socket
Storz C cpl w/ /" Hose Socket
Storz C cpl w/ /4" Hose Socket
Storz C cpl w/" Hose Socket
Storz C cpl w/ /" Male Thread
Storz C cpl w/" Male Thread
Storz C cpl w/" Female Thread
Storz C cpl w/ /" Female Thread
Storz C Blanking Cap
Storz Gasket F/C cpl Lug 66
95 54
95 5449
95 605
95 595777
95 595769
95 5456
95 605
95 59575
95 54479
95 L5
95 7840
95 79455
95 7945
95 L788
95 L7494
95 79454
95 L78486
95 57705
8
12-03-10 10:10:38
Fire couplings
Description
Nor- cpl w/ /" Hose Socket
Nor- cpl w/'' Hose Socket
Nor- cpl w/ /" Hose Socket
Nor- cpl w/ Male Thread
Nor- cpl w/ Female Thread
Nor- cpl w/ /" Female Thread
Nor- cpl Blanking Cap w/Chain
Nor- cpl Gasket
95 88
95 84
95 957
95 96
95 57689
95 509
95 57697
9
12-03-10 10:10:49
Fire couplings
Description
Instant. cpl w/ /" Hose Sockets
Instant. cpl w/ /4" Hose Sockets
Instant. cpl w/" Hose Sockets
Instant. cpl w/ /" Hose Sockets
95 5794
95 57974
95 57966
95 57958
95 57909
95 5789
95 5795
95 5797
95 5798
95 57990
95 L09
Description
Nakajima cpl 40A w/ / Hose Socket
Nakajima cpl 40A w/ / Male Thread
Nakajima cpl 40A w/Female Thread
Nakajima Gasket F/40A
Nakajima 40A cpl Spanner
86 L5765
86 L78558
86 7877
86 7877
86 78608
86 67896
86 L5984
86 L9047
86 6768
Product no.
86 L958
86 L5585
86 786
86 786
86 67890
Description
Nakajima 65A cpl w/ Female Thread
Nakajima 65A cpl w/ / Female Thread
Nakajima Blindcap F/65A
Nakajima Gasket F/65A
Nakajima 65A cpl Spanner
0
12-03-10 10:11:05
Fire Nozzles
UNITOR HS NOZZLES
Description
Technical data:
Materials:
Operating head: Rubber and brass, chrome-plated
Nozzle:
Polyoxymethylene (POM),
Impact-resistant, resistant to
High temperatures
Valve plate:
Polyamide (PA)
Valve rod:
High-grade steel
Approvals,
Bureau Veritas
Danish Maritime Authority
Lloyds Register
Netherlands Shipping Inspection
Det Norske Veritas
Product no.
Inlet
weight (kg)
Dimensions (mm)
HS 12
95 7087
male
,
49x98
Spray 0
litres/min. Throw distance (m)
HS
HS 6
HS 0
60-0
85-
40-
470-
500-4
540-5
575-4
60-6
670-7
HS16
95 70889
male
,
47x98
HS20
95 70897
male
,
48x98
In addition we can supply the HS nozzle as a water fog Applicator pipe 6FT
and Male Thread Product no: 95 70805
12-03-10 10:11:08
Fire Nozzles
Description:
Product features:
Rotating connection:
The coupling rotates on a ball bearing and prevents the hose from uncoupling
inadvertently even under pressure. The mobility of the jet pipe operator is maintained at all times.
Customer benefits:
Technical data:
Materials:
Housing and ball:
Handle and switch lever:
Twist ring:
Jet pipe head:
Nozzle
TURBO NOZZLE 000
TURBO NOZZLE 000
TURBO NOZZLE 000
TURBO NOZZLE 000
Product no.
86 77759
On request
Type
Pressure
(Bar)
Nozzle/tip
dia. (mm)
5
5/400
5/400
400
6
6
6
6
6
9
6
Description
TURBO NOZZLE 000 w/ Male Thread
TURBO NOZZLE 000 w/ Male Thread
Flow rate
(l/min.)
Full jet
Spray jet
60
60
0
0
5
5
400
400
Type
5
400
Throw Distances
(m)
Full jet
Spray jet
0
8
7
9
9,5
7
0
Spray angle
max.
0
0
0
0
12-03-10 10:11:11
Fire Hydrants
Fire Hydrants
Hydrants
Product no.
95 5498
95 547
95 590
95 5480
95 7969
95 L9040
95 7859
95 7859
Description
Hydrant Valve w/Male Thread
Hydrant Valve " w/flange DN50 PN6
Hydrant Valve / w/flange DN65 PN6
Flange w/"Female Thread DN50 PN6 F/Hydrant
Hydrant Divider Stortz 65*X Stortz 65 Light Metal w/ Inl. Outl.
Repair Kit for Hydrant Valve (5498)
Spare Membrane for Hydrant Valve
Spare Handweel for Hydrant Valve
Material: Brass
Description
Int. Shore Conn w/" Male Thread Brass
Int. Shore Conn w/ /" Male Thread Brass
Int. Shore Conn w/Stortz C " Female Coupling
Material: Brass
12-03-10 10:11:17
12-03-10 10:11:32
Fire extinguishers
Fire hoses, couplings and nozzles
Rescue equipment
Medical
Oil spill equipment
Systems
Service
12-03-10 10:11:42
Description:
Wherever sudden outbreaks of hazardous gases and oxygen deficiency may occure, in particular in industry and merchant marine, the
Unipack BA set is ready to immediately provide the user with breathing air.
Your Unipack BA set: economy with a wide choice of accessories. Combine your Unipack BA set with an air cylinder of your choice.
The Unipack BA set already offers the comfortable carrying plate, the reliable pressure reducer, the easy to read gauge, the perfect
demand valve and the most successful face mask ever made, the SP-S.
Product features:
Customer Benefits:
Accessories:
Technical Data:
Ordering information:
Product no.
9 757879
9 75788
9 757905
9 757894
9 7579
96 6904
96 69045
96 69048
96 7996
Description
Unipack II Standard model excluding cylinder
Unipack II Supplementary Air Model excluding cylinder
Unipack Airmaxx Demand valve w/o hose
Hose f/demand valve Airmaxx
Unipack SP-S full-face mask Maxx
6 liter/00 bar steel cylinder filled for Unipack
6 liter/00 bar steel cylinder filled for Unipack
7 liter/00 bar steel cylinder filled for Unipack
6,8 liter/00 bar composite cylinder filled for Unipack
Accessories:
Product no.
96 5086
9 5580
9 69060
9 66779
Description
Test gauge for air cylinders
Dust plug 00 bar for air cylinder (chrome/brass)
Dust plug 00 bar for air cylinder (chrome/brass)
Rescue mask compl. w/ / m hose for Unipack
Test gauge
6
12-03-10 10:11:53
Uniscape 15-H
Description:
Uniscape 5-H is the Short Duration Compressed Air Emergency Escape Breathing
Device [EEBD] from Unitor, providing respiratory protection in toxic and oxygen
deficient atmospheres. Uniscape 5-H offers a duration of 5 minutes for a safe
escape. Designed for use on board of ships, in chemical industries, off-shore oil
rigs, refineries, water utilities and confined spaces, the Uniscape 5-H is light
and compact and very easy to use. It can either be carried by the user or kept in
readiness close to the workplace for immediate access in case of emergency.
The Uniscape 5-H is supplied in a fluorescent protective carrying bag ensuring
high visibility and protection from the environment. It consists of a litre 00 bar
compressed air cylinder with automatic air supply valve and pressure indicator,
a high visibility hood with oro-nasal facemask, large visor and elastic neck seal,
and a well visible pneumatic end-of-service time indicator turning red before the
cylinder pressure is exhausted.
For easy use and to keep potential users acquainted with the Uniscape 5-H, the
protective carrying bag has clear donning instructions in 4 pictographs. The use
is very simple pull the firing strap, don the hood and make your way to safety.
Pulling the firing strap opens the zipper giving access to the hood, automatically
starting the air supply, in one simple action the set is already delivering breathing
air to the hood when it is donned. Uniscape 5-H, the Emergency Escape Breathing Device is certified to EN 46 for a duration of up to 5 minutes. It meets
the International Maritime Organisation [IMO] SOLAS resolution MSC. 99C [7]
making EEBDs mandatory on all vessels.
Customer benefits:
Accessories:
Storage cabinets
Storage brackets
Cover for bracket
Technical Data:
Weight: approx. 6 Kg
Cylinder: Steel, -litre/00 bars
Operating time: min. 5 minutes
Certified to EN 46 & MED
Ordering information:
Product no.
9 6689
9 6895
9 6864
9 6760
Description
Uniscape 5-H
Cabinet for Uniscape
Brackets for Uniscape 5-H ( set)
Plastic cover to fit brackets
7
12-03-10 10:11:57
Filter Masks
8
12-03-10 10:12:03
Breathing Filters
9
12-03-10 10:12:12
Breathing Filters
Ordering information:
Product no.
94 66754
94 65066
Description 2
ADVANTAGE 00
ADVANTAGE 00 SERIES
94 66796
94 66704
94 667
94 6670
94 6678
Product no.
94 65090
Description 2
ADVANTAGE 00 SERIES
94 65044
94 65047
94 65048
94 650499
94 650507
94 65055
94 6505
94 650549
94 650556
94 650564
94 65057
94 650598
94 650606
94 65064
94 65060
0
12-03-10 10:12:12
Wilhelmsen Ships Service has a standard Lifeboat air cylinder 50L/00 Bar
working pressure according to BS5045 / DOTAA
The cylinder will be supplied with valve
In addition we have the standard air regulator, fitted the above cylinder.
Ordering details
6586
69
Accessories:
L554
L5694
L98
L558
494
05565
Note!
To have a complete filling hose from Bauer compressor to the lifeboat air
cylinders with 5/8 female tread you require the filling hose, Adaptor, Connection
stub and Nut air.
Other adaptors available on request.
12-03-10 10:12:18
Description:
The units of the COMPACT LINE the JUNIOR II and the OCEANUS perfectly suit the use on board vessels that need to refill
breathing air cylinders regularly but not continuously. Both compressor types are lightweight, have a compact design and the cost
effectiveness of the range does not affect the toughness of the compressor.
The New Classic from BAUER Compressors The JUNIOR II's small size and refined compressor
technology appeal especially to those users who want a safe and reliable source of pure air,
even in remote locations.This compact BAUER unit has been manufactured using top quality
components, upholding BAUER's core characteristics of reliability and safety.
The compact design of the JUNIOR II creates better value for money.The JUNIOR II unit is available
with a turquoise plastic fan shroud, grey handle and frame, as well as an aluminium block.
The patented TRIPLEX filter cartridge is a safe source of pure breathing air according to
DIN EN 0 (formerly DIN EN 88).
TRIPLEX filter cartridge: P filter with modifications (condensate outlet, modified filter
bottom, shorter housing and standard safety valve).
Condensate drain: manual drain operated by two screw knobs on the filter housing and one on the separator after the second
stage. These drains have been placed at a height that leaves enough space for a condensate container underneath.
All Compressor Versions: L-shaped frame with special base plate for the compressor block and motor allowing fast and simple
belt tensioning, V-belt drive (SPZ belt), Plastic fan shroud with integrated holders for the telescopic intake tube, Steel carrying handle
fixed to the base plate allows easy transport by two people (rails on both sides of the unit), Rubber anti-vibration feet, integrated fill
adapter brackets for two hoses with DIN and ISO connections.
Available with switch over device 0 / 5 bar or 5 bar/0 bar alternatively
For professional performance. Offers toughness, mobility and greater air capacity! OCEANUS is designed to go on vessels, diving
boats and expeditions. The lightweight and compact unit is portable by a single person and fits in every boot.
New design High grade steel
The use of stainless steel and Kevlar for frame and filling device ensures extreme resistance to corrosion.
For durability and best possible resistance to corrosion the frame, handle and safety-filling device are made of stainless steel. Filling
hose is made of Kevlar. Inter- and after coolers are made of galvanized steel.
PROFI- LINE
Description:
The units of the PROFI LINE II - MARINER 00, MARINER 50 and MARINER 0 - are designed for professional divers and those
who operate professional filling stations. The compressors offers apart from the high toughness of BAUER compressors, above all,
economic efficiency, extremely tough continuous operation and expansibility.
Professional quality. Tailored to meet particular requirements. With alternatives between 00 l/min to 0 l/min the MARINER range
is the most versatile among the new units of the PROFI LINE II. Crash frame in series.
Indestructible
The driving gear is suitable for short running as well as continuous operation. The -/4stage construction and the heavy-duty
industrial roller bearings guarantee maximum lifetime for all professional applications. The first stage and the high pressure final
stage are equipped with high tech polymer piston rings, which proved their outstanding wear and tear properties during several
endurance tests in an independent Quality Inspection Centre. The maintenance-free rigid oil
pump guarantees reliable lubrication.
Resistant
A newly developed, supra-light aluminium chassis guaranteed to offer the best protection
against corrosion!
The inter- and after-coolers are made of stainless steel, to resist the toughest climate
conditions. The vibration reducing construction of the motor rocker stands for smoothest
compressor operation as well as self-tensioning of the v-belt.
12-03-10 10:12:20
Features
Temperature compensated filtercartridge lifetime control
Maintenance interval control
Running hour counter
Low battery control
Power supply:
Lifetime battery:
V lithium battery
approx. years
Technical Data:
Models max. 330 bar/
5000 psig *
JUNIOR II-E
OCEANUS-E
MARINER 00-E
MARINER 50-E
MARINER 0-E
Drive
F.A.D.
l/min *
-phase
-phase
-phase
-phase
-phase
00
40
00
50
0
Drive
kW
PS
.
.0
4.0
5.5
7.5
.0
4.0
5.5
7.5
0
Dimensions
approx. cm
L
W
H
78
4
4
66
40
4
5
59
6
5
59
6
0
65
70
Filter System
TRIPLEX
P
P
P
P
P
Weight net
approx. kg
46
5
5
5
54
* available with change over device 0 / 5 bar or 5 / 0 bar alternatively.
The patented TRIPLEX filter system guarantees purest breathing air according to DIN EN 0 (formerly DIN EN 88)
Ordering information:
Accessories:
Product no.
Type
Voltage
95 6987
95 6995
95 6940
95 7589
95 7587
95 75845
95 790598
95 L68
95 7969
JII E
JII EH
JII EHU
OCEANUS E
OCEANUS EH
OCEANUS EHU
MARINER 00-E
MARINER 50-E
MARINER 0-EH
400/440
400/440
400/440
400/440
400/440
400/440
400/440
400/440
400/440
Frequency
Hz
50/60
50/60
50/60
50/60
50/60
50/60
50/60
50/60
50/60
Pressure
(bar)
00
00
00/00
00
00
00/00
00
00
00
Product no.
95 5895
95 6056
95 6055
95 65644
95 6565
95 755967
95 709
95 7099
95 6554
95 65567
95 75869
95 60668
95 7608
Description
Filter charge KB-57679 for TRIPLEX filter
Additional Filling valve 00 Bar
Additional Filling valve 00 Bar
Service kit Junior II, 500 hours
Service kit Junior II, 000 hours
B-timer (hour meter)
Change over device from 00-00 bar
Change over device from 00-00 bar
Mineral oil l
Synthetic oil l 09-9 to 0-99
Synthetic oil l > 07-006
Filling hose meter
Service kit Junior II, 000 hours
12-03-10 10:12:23
Description:
IMO-MSC CIRC 850 is a guideline for maintenance and inspection of fire-protection systems and appliances.
It involves weekly testing and inspection of Breathing Apparatus cylinders on leakage
Annual testing and inspection of Breathing Apparatus air recharging systems checked for air quality
No specific standard is mentioned but Unitor has chosen for European Standard EN 0 as it is the most used and the most
convenient standard.
According EN 0 testing of air quality for the following apparatus is recommended for:
Testing the quality of air from high-pressure systems is generally done on:
Any contamination in a concentration which has toxic or health influence, must be lower than local regulation prescribes
Presence of smell and taste. (Should not occur)
Testing the quality of air from high pressure systems on contents of:
Carbon Dioxide
Carbon Monoxide
Oil
Water vapor
Nitrous gases (local regulations)
The Unitor Breathing air test kit provides adequate and quick means to make sure that your air quality for above products is in order.
Four of the above possible contaminations can be measured simultaneously using test tubes mounted on a manifold whereby each
tube measures a separate contamination or gas.
4
12-03-10 10:12:26
Ordering information:
Product no:
9 76660
9 78568
9 78576
9 754
9 7558
9 76504
Qty
4
U/M
pce
pce
pcs
pce
pce
pce
Description
Breathing air quality tester cpt Consisting of:
Breathing Air Qual. Test Tool GCE
Tube Hold. F Gas Testing
Timer Clock
IR Thermometer - to 0 Deg.C
User instruction manual for BA tester
8 708958
pce
Calibration instrument:
Flowmeter 0. ltr/min - .5 ltr/min
88 747
88 6655
88 7475
88 6678
set
set
set
set
Please notice that Wilhelmsen Ships Service has standardized the kit for using synthetical
oil. If you are using mineral oil you need to order the mineral oil test tubes in addition.
Optional items are:
Product no:
88 66686
88 757
Qty
U/M
set
set
Optional equipment
Gas Detection tube: Airtest Mineral Oil HP
Gas Detection tube: Airtest NO HP
The Breathing air quality tester comes in a handy suitcase with sufficient space for all tools.
5
12-03-10 10:12:26
Head Protection
V-Gard
Description
The popular V-Gard helmet is designed in a High Density Polyethylene shell.
Accepts the full range of MSA safety helmet accessories.
Available in standard range of colors.
A small size is also available.
Certified to EN 97 and meeting optional requirements for electrical insulation
and very low temperature.
Linesman
Description
Brimless version of the premium quality Super V-Gard II.
The popular Linesman design in an ABS shell.
Accepts the full range of MSA safety helmet accessories.
For use when unrestricted upward vision is important.
Perfect for confined spaces, or any high level work.
Fits very well under total encapsulating chemical suits.
Certified to EN97 and meeting optional requirements for lateral deformation,
electrical insulation, very low temperature.
Chinstrap webbing
Chinstraps may be used on safety helmets when worn at heights or in windy
conditions, adding stability to the helmet.
Stow-away safety goggles
The Stow-Away Goggle attaches inside a safety helmet and is always ready for
use. Extremely comfortable, no pressure points behind the ears, cannot fall off,
ensures compatibility with helmet mounted ear muffs.
Fully integrated head and eye protection
Stows inside the helmet when eye protection is not required
Protected from damage when not in use
Approvals and standards, EN 66, class F
Winter liner for V-gard only
MSA winter liners are contoured to fit head shapes and cheek curves.
Nonmetallic Velcro hooks and pile-type adjustable chinstraps are used for
correct fit on all MSA liners. Tabs and buttons are used for easy use with MSA
or other suspensions.
Designed to give extra protection during cold and wet weather
Perfect for workers in large refrigeration plants
Winter liners can be removed easily from the helmet for washing/ drying.
Ordering information:
Product no.
94 7650
94 7658
94 76546
94 7655
Accessories:
Description
Helmet V-Gard white w/staz-on suspension
Helmet V-Gard yellow w/staz-on suspension
Helmet Linesman white w/staz-on suspension
Helmet Linesman yellow w/staz-on suspension
Product no.
94 78989
94 799
94 7900
Description
Chinstrap webbing
Stow-away safety visor, clear
Winter liner c/w zip, knitted cape
6
12-03-10 10:12:31
Hearing Protection
Description
A wide, soft padding and adjustable headband force for individual, comfortable and firm fit. A two point mounting system
to distribute pressure evenly around the cushions. Excellent noise attenuation and maximum space for ears inside.
Technical information:
Frequency (headband)
Mean attenuation
Standard deviation
Assumed protection
H = 31, M = 24, L = 23, SNR = 32
6
.7
.9
9.8
5
.
.
8.0
50
9.
.
6.9
500
5.7
.7
.0
000
9.
.
6.
000
.0
.
9.7
4000
6.8
.7
4.
8000
9.0
.7
5.
6
.4
.7
7.7
5
.
.
7.8
50
8.
.
4.8
500
5.
.
.0
000
7.0
.
4.7
000
8.6
.4
6.
4000
8.6
.6
6.0
8000
40.
.
6.9
Ordering information:
Product no.
94 76587
94 76595
Description
Ear Muff type EXC passive w/ headband
Ear Muff type EXC passive helmet mounted
7
12-03-10 10:12:35
Hearing Protection
Description
For users who prefer to dispose of their plugs after each use.
Easy to use and affordable, FormFit ear plugs offer excellent noise reduction
while being very comfortable to wear, perfect for industries such as the marine market,
metal working and construction.
The disposable plugs are manufactured from polyurethane foam and are available
in corded and non-corded versions they are packed in dispenser boxes of
00 individually wrapped pairs.
Hexagonal shape makes it easy to grip and roll
No waste in manufacturing means better value for you and its better for the
environment too.
Once rolled and inserted the foam expands back to form the perfect fit.
Much easier to insert
Allows proper insertion as the plug stays compressed that little bit longer
Plug wont grow and become uncomfortable from absorbing body moisture
Softens in ear when exposed to body temperature
Great comfort and seal from low, even pressure as plug softens
Performance according standard EN 5-:99, SNR 9.
Ordering info: FormFit disposable ear plugs, non-corded (00 pairs)
Attenuation data for all FormFit
Frequency
Mean Attenuation
Standard Deviation
Assumed Protection
H=32, M =25, L =20, SNR=29
6
7.6
5.5
.
5
50
.
6.
6.4
7.9
4.8
8.4
INSPEC 0194
500
0.
8.4
.9
000
.
5.9
6.
000
5.7
4.6
.
4000
8000
4.
4.8
.6
4.
9.6
7.4
EN 352-2:1993
Ordering information:
Product no.
94 7660
Description
Ear Plugs disposable non-corded (00 pcs)
8
12-03-10 10:12:37
Chemical Protection
Description
Making mistakes is part of the human condition. People who work with aggressive and hazardous chemicals are particularly at risk
when things go wrong. Even though safety standards are high, serious incidents can and do occur. A Trellchem protective suit will
give your staff the very best protection in the worst of environments.
All Trellchem gastight chemical suits are equipped with positive pressure in the suits ensures increasing safety, which can be either
connected to a Breathing apparatus with a supplement air connection, or with an additional airline from Ships air supply.
Note: The airline must also be of chemical resistant materials.
This pressurized safety system, in which the airflow can be set at either or 0 liters per minute optional 0 or 00 liters per minute
when operating together with external air supply (airline), offers protection against leaks, for example by accidental perforations, and
also provides the suit with ventilation.
All new suits as of July 007 are equipped with the new BAYONET GLOVE RING SYSTEM with the following features;
Quick and simple glove exchange.
Accommodates all current glove combinations, including the possibility of combining both the 4H inner glove and a rubber cuff.
Safe and easy to assemble.
Positions are easy to check.
Distinct markings, the ring system is easily maneuvered also in dark conditions.
Easy grip
Easy exchange of 4H inner glover (standard with VPS suit)
Locking pin for added safety
Two Viton O-rings and glove compression for optimal sealing effect
Old Trellchem suits can be upgraded
The Trellchem gastight chemical suits are available in three different combinations of materials, representing three levels of
protection.
TRELLCHEM VPS, CHLOROPRENE RUBBER
TRELLCHEM SUPER T-ET, VITON
TRELLCHEM LIGHT, PVC
Proper care is important in terms of both safety and economy. In order to make it as easy as possible for you to maintain the
equipment in top form, we supply the following with each suit:
Resistance Table.
Plastic gray storage bag, hanger and instructions for storage.
Record card for notes about the operations in which the suit has been involved, the chemical to which it has been exposed, etc.
Trellchem VPS
Trellchem Super
Trellchem Light
9
12-03-10 10:12:42
Chemical Protection
TRELLCHEM
Certification
Design
Trellchem VPS
Trellchem Super
Trellchem Light
NFPA 99*
EN 94- & -
Marine approval
EN 94- & -
Marine approval
EN 94-
Gastight non-encapsulating
suit (type b) with face seal
and breathing apparatus worn
outside the suit. Good for working in confined spaces.
Flame
resistance ***
Yes
Yes
Area of use
Chemical
resistance
40
12-03-10 10:12:43
Chemical Protection
TRELLCHEM
Ordering information:
Product no.
94 74050
94 740555
94 70
94 70
94 7049
94 5898
94 5896
Description
Trellchem Super T-ET with mini hood, without hose, medium
Trellchem Super T-ET with mini hood, without hose, large
Trellchem VPS T-ET with mini hood, without hose, small
Trellchem VPS T-ET with mini hood, without hose, medium
Trellchem VPS T-ET with mini hood, without hose, large
Trellchem Light T, without hose, medium
Trellchem Light T, without hose, large
Accesories:
Product no.
94 7056
94 60504
94 5894
94 5894
94 66958
94 66966
94 L7400
on request
94 7909
94 L9499
94 L776
94 74988
94 74985
94 749846
94 L9465
94 74986
94 L787
Trellchem hoses
Trellchem bag
4
12-03-10 10:12:53
Chemical Protection
Description:
Trellchem Splash 600 provides protection against liquid splash in areas of minimal risk. The suit is made of a polyamide fabric,
which is coated on both sides with PVC.
For the protection of crewmembers engaged in loading and discharging operations on board ships carrying chemicals or liquefied
gases in bulk. IMO IBC/GC Code. Chapters 4.
Splash 900
Splash 600
4
12-03-10 10:13:00
Chemical Protection
Certification
Design
Material
Splash 900
Splash 600
EN 466
EN 466
Chemical
resistance
Limited resistance against high concentration oxidizing acids, ketons, esters and aromatics.
Flame
resistance
Area of use
Ordering information:
Product no.
94 796
94 704
94 7
94 L8755
Description
SPLASH 600 WITHOUT BOOTS, SIZE S TRELLEBORG
SPLASH 600 WITHOUT BOOTS, SIZE M TRELLEBORG
SPLASH 600 WITHOUT BOOTS, SIZE L TRELLEBORG
SPLASH 900 WITHOUT BOOTS, TRELLEBORG SIZE L
Product no.
94 5708
94 5706
94 5704
94 5704
Description
Safety Boot size 4
Safety Boot size 4
Safety Boot size 44
Safety Boot size 45
Ordering information:
94 57684
4
12-03-10 10:13:05
This C-series, Compact, sets new standards for personal gas monitors for
flammable, oxygen and toxic gases. Designed for use in the toughest marine
environments offering an unbeatable combination of powerful, loud and bright
alarms with a compact and lightweight design.
RANGE
0-00% LEL
0-5%
0-50 ppm
0-500ppm
ALARM
0%/40% LEL
9%/.5%vol.
5/0 ppm
0 ppm STEL/5 ppm LTEL
0/00 ppm
00 ppm STEL/0 ppm LTEL
44
12-03-10 10:13:11
Ingress protection:
Approvals
Ex:
MED :
008/06
Standard packages
Accessories
Product numbers
8 754
8 70954
8 755
8 79
8 7550
8 757
8 65689
Description
Carry case
Belt for carry case
Harness plate
Chest harness straps
Hard hat harness
Aspirator assembly
Aspirator hose 0m
45
12-03-10 10:13:12
COMBI-MATE 3
Compact, 4-gas personal monitor for oxygen, toxic and flammable gases
The Combi-Mate sets new standards for multi gas monitoring instruments. Designed
for use in the toughest marine environments offering an unbeatable combination of
powerful, loud and bright alarms with a compact and lightweight design.
Simple
One-button operation; simple even with gloved hand
Simple indications of operating status can be viewed at a glance
0 days countdown warning of calibration due date
Easy to read backlit graphic display for gas readings and diagnostics
Large, top mounted 4-gas display; easily viewed from above while
wearing instrument
Top performance in a small and lightweight package
Flexible
Lithium-ion rechargeable battery gives >6 hours operation
Proven sensor technology and software operation
Robust
Tough plastic construction to resist even the toughest shock and vibration
Over-moulded rubber for added protection
Water and dust resistant to IP65 and IP67
Rugged and weatherproof; suitable for marine environments
Stainless steel alligator clip
Assurance
95dBA audible alarm
Bright dual red/blue visual alarm
Internal vibrating alarm
Two levels of instantaneous alarm
Time Weighted Average alarm for 8 hour (LTEL) and 5 minute (STEL) averages
Based on the tried and tested Combi-Mate instruments
69g (9.6oz)
h x 7w x 49d mm (d tapers to 0mm)
(4.4 x .8 x .9 inches)
RANGE
0-00% LEL
0-5%
0-50 ppm
Carbon Monoxide
ALARM
0%/40% LEL
9%/.5%
5/0 ppm
0 ppm STEL/5 ppm LTEL
0/00 ppm
00 ppm STEL/0 ppm LTEL
46
12-03-10 10:13:18
Approvals
Ex:
MED :
008/06
Sensors
O+CH4
O+CH4+HS
O+CH4+CO
O+CH4+HS+CO
Accessories
Product numbers
8 790
8 70954
8 755
8 79
8 79077
8 65689
8 65687
8 65685
8 65684
8 656850
8 754
8 7587
8 75085
Description
Carry case
Belt for carry case
Harness plate
Chest harness straps
Aspirator assembly
Aspirator hose 0m
Aspirator hose 0m
Aspirator probe m, fixed
Aspirator probe m, telescopic
Water trap
Gas-Test kit, Combi-Mate w/o case
4-gas cylinder for Gas-Test kit
Charger + power supply for CM 9060V/V
47
12-03-10 10:13:19
COMBI-MATE
Personal monitors for Oxygen, Flammable, Toxic and Special gases
Optional with built-in suction pump.
Combi-Mate is a well proven instrument that offers a wide selection of special
sensors. This accomodates your various needs for gas monitoring on modern
vessels.
Reliable
True single button operation the most user friendly product available
Rechargeable Li-ion battery gives full hours operation
Easy to read backlight graphic display for gas readings, diagnostics and
operating status
0 day countdown warning of calibration due dates
Robust
Tough plastic construction with flexible internal assembly to resist shock and
vibration
Overmoulded rubber for added protection
Water and dust resistant to IP65
Assurance
90dbA audible alarm (at 0 cm)
Bright dual red/blue visual alarm
Internal vibrating alarm
500g (.lb)
h x 8w x 57d mm (4.8 x 5 x . inches)
RANGE
0-00% LEL
0-5%
0-50 ppm
0-500ppm
ALARM
0%/40% LEL
9%/.5%
5/0 ppm
0 ppm STEL/5 ppm LTEL
0/00 ppm
00 ppm STEL/0 ppm LTEL
48
12-03-10 10:13:26
Approvals
Ex:
MED :
008/04
Accessories
Product numbers
8 65698
8 70954
8 65689
8 65680
8 65689
8 65687
8 65685
8 65684
8 656850
8 70948
8 70946
8 7477
8 65667
Description
Carry case
Belt for carry case
Chest harness kit
Aspirator assembly
Aspirator hose 0m
Aspirator hose 0m
Aspirator probe m, fixed
Aspirator probe m, telescopic
Water trap
Gas-Test kit, non pumped instruments with case
Gas-Test kit, pumped instruments with case
4-gas cylinder for Gas-Test kit
Combi-Mate charger 9060V/6V
49
12-03-10 10:13:27
TANK-MATE
Portable monitors for flammable hydrocarbons, oxygen and toxic gases
Incorporating the latest infrared detection technology, Tank-Mate meets the
extended need of measuring hydrocarbons in inert backgrounds. This instrument
is especially suitable for tankers with inert gas system, and is a must for gas
freeing and inerting procedures.
Infrared hydrocarbon sensor
Volume % measurement for purging applications
% LEL measurement in air or inert background
Single or dual range measurement
Calibration for methane, propane, butane or ethylene
No poisoning effects
No sensor burnout at high concentration
Fail safe
Long sensor lifetime reduced cost of maintenance
Convenient easy to use
Large four channel simultaneous display
Loud and clear alarms
Visual and audible confidence indication
Low battery alarm
Rugged and reliable
Electric sampling pump
900g (.lb)
8h x 67w x 7d mm (4.65 x 6.6 x .9 inches)
ALARMS
0%/40% LEL
n/a
Oxygen
9%/.5%vol.
Hydrogen Sulphide
5/0 ppm
TWA (5 min/8 hours)
0 ppm STEL/5 ppm LTEL
Carbon Monoxide
0-500ppm
0/00 ppm
TWA (5 min/8 hours)
00 ppm STEL/0 ppm LTEL
4 channels available. Max alarm levels per channel.
Gas response times:
Expected sensor life:
Audible alarms:
Visible alarms:
Display:
Battery:
Operating time:
Ingress protection:
RANGE
0-00%LEL
0-00% vol.
0-5%vol.
0-50 ppm
50
12-03-10 10:13:31
Approvals
Ex:
MED :
USA and Canada:
ATEX Ex G Ex ib d 11C T4
Wheelmarked acc.to Council Directive 96/98/EC
Class 1 Division 1, Groups A,B,C,D
008/XX
Sensors
O+CH4-IR
O+CH4-IR+HS
O+CH4-IR+CO
O+C4H10-IR
O+C4H10-IR+HS
O+C4H10-IR+CO
Accessories
Product numbers
81 656900
81 656819
81 65687
81 65685
81 65684
81 656850
Description
Carry case and belt
Aspirator hose 10m
Aspirator hose 0m
Aspirator probe 1m, fixed
Aspirator probe 1m, telescopic
Water trap
51
12-03-10 12:29:14
SPAN GASES
5
12-03-10 10:13:45
Refillable cylinders
Product no.
78 6566
78 6844
78 6644
78 688
78 65689
78 6775
78 685
78 686
78 5890
78 58908
78 588988
78 60096
78 60047
78 588996
78 689
78 589077
78 5894
78 58896
78 588970
78 606
78 60
78 58906
78 7
78 58899
78 5899
78 6877
78 6885
78 6079
78 58905
78 589044
78 6046
78 5895
78 65797
78 90566
78 6004
78 5897
78 59584
78 588947
78 588954
78 786
78 58900
78 58900
78 774
77 90560
77 90560
Product Description
METHANE 60% LEL IN NITROGEN
METHANE 80% LEL IN NITROGEN
METHANE 5VOL% IN NITROGEN
METHANE 6.6 VOL% IN NITROGEN
METHANE 0 VOL% IN NITROGEN
METHANE 50% VOL IN NITROGEN
METHANE 80 VOL% IN NITROGEN
METHANE 99.995 VOL%
ETHYLENE 5% LEL IN AIR
ETHYLENE 5% LEL IN NITROGEN
PROPANE 5% LEL IN AIR
PROPANE 40% LEL IN AIR
PROPANE 50% LEL IN AIR
PROPANE 5% LEL IN NITROGEN
PROPANE PURE 99.5 %
PROPYLENE 5% LEL IN AIR
BUTANE 0% LEL IN AIR
BUTANE 5% LEL IN AIR
BUTANE 5% LEL IN NITROGEN
BUTANE 8%VOL,5%CO IN N
ISOBUTANE 50% LEL IN AIR
BUTYLENE 5% LEL IN AIR
BUTYLENE 00PPM IN AIR
BUTADINE 5% LEL IN AIR
BUTADINE 5% LEL IN NITROGEN
PENTANE 49% LEL IN AIR
PENTANE 49% LEL IN AIR SG50
O 0.5% IN NITROGEN
O % IN NITROGEN 99%
O % IN NITROGEN 98%
O 5% IN NITROGEN 95%
O 8% IN NITROGEN 9%
CO 0.% IN NITROGEN 99.7%
CO % IN NITROGEN 99%
CO .5% IN AIR
CO 5% IN NITROGEN 95%
CO 5% IN NITROGEN 95% SG50
AMMONIA 5% LEL IN AIR
AMMONIA 5% LEL IN NITROGEN
AMMONIA 50PPM IN AIR
VINYLCHLORIDE 5%LEL IN AIR
VINYLCHLORIDE 5% LEL IN NITROGEN
REFR. R IN NITROGEN 500 PPM
NITROGEN N-050 .0 M
NITROGEN N-5050 0.0 M
CH4 (%)
CH4 (4VOL%) IN N
CH4 (5%) IN N
CH4 (6.6%) IN N
CH4 (0 VOL%)
CH4 50 % VOL
CH4 (80 VOL%) IN N
CH4 (00%)
CH4 (0.95% VOL)
CH4 (O.95%)
CH8 (0.74% VOL.)
CH8 (0.84%VOL)
CH8 (.05%VOL)
CH8 (0.74% VOL)
CH8 (99.5%)
CH6 (0.70%)
C4H0 (0.57% VOL.)
C4H0 (0.6% VOL.)
C4H0 (0.6% VOL.)
C4H0 CAL.GAS
C4H0 (0,95% VOL)
C4H8 (O.56%)
C4H8 (00PPM)IN AIR
C4H6 (0.49% VOL.)
C4H6 (0.49% VOL.)
C5H (0.68%) IN AIR 0L
C5H (0.68%) IN AIR 50L
5
12-03-10 10:13:47
0-0.7 BAR
Product Description
MINIMIX % METHANE IN AIR
MINIMIX METHANE ,5% IN AIR
MINIMIX METHANE 50% IN NITROGEN
MINIMIX 0.6% PROPANE -AIR
MINIMIX .05% PROPANE -AIR
MINIMIX BUTANE 0.9% IN AIR
MINIMIX BUTANE 50% IN NITROGEN
MINIMIX ISOBUTANE 0.9% IN AIR
MINIMIX 8% BUTANE 5% CO IN NITROGEN
MINIMIX 0.75%PENTANE-AIR
MINIMIX PURE NITROGEN
MINIMIX O % IN 99% NITROGEN
MINIMIX O % IN 98% NITROGEN
MINIMIX O 5% IN 95% NITROGEN
MINIMIX O 9% IN 8% NITROGEN
MINIMIX CO % IN NITROGEN
MINIMIX CARBON MONOXIDE 60PPM IN AIR
MINIMIX CARBON MONOXIDE 00PPM IN NITROGEN
MINIMIX CARBON MONOXIDE 500PPM IN NITROGEN
Disposable cans
Product no.
78 60070
78 69965
78 795
78 600
78 7944
78 69957
78 7960
78 699
78 6006
78 60054
78 6997
78 600
78 65798
78 6575
78 604
78 69999
78 6009
78 6089
78 6567
Accessories
78 60088
HYDROGENSULPHIDE IN NITROGEN
4 COMPMIX 50 PCO 5 PHS .5% CH4 8OX
4 COMPMIX 50 PCO 5 PHS .5% CH4 8OX
ETHANOL 50 PPM IN NITROGEN
ETHANOL 450 PPM IN NITROGEN
4 COMPMIX 00 CO 5HS 50 LEL CH4 8 OX
54
12-03-10 10:13:48
Flameguard Suit
Description:
Product features:
Customer benefits:
Ordering information:
Product no.
9 65400
94 76680
94 766804
94 766805
94 766806
94 766807
94 766808
9 75480
94 6548
94 60880
94 75565
Description
UNITOR FLAMEGUARD COMPL.
Comprising of Jacket, trousers, helmet and gloves
To be ordered separately by size:
FIREMAN BOOTS SIZE 4
FIREMAN BOOTS SIZE 4
FIREMAN BOOTS SIZE 4
FIREMAN BOOTS SIZE 44
FIREMAN BOOTS SIZE 45
FIREMAN BOOTS SIZE 46/47
Other products:
UNITOR FLAMEGUARD COMPL. XL
Spare parts
GLOVES F/FIRESHIELD & FLAMEGUARD
FIREMANS GLOVES INSULATED
FIREMANS HELMET FUEGO RED WITH
FACE SHIELD AND NECK CURTAIN
55
12-03-10 10:13:51
Description:
Product features:
Customer benefits:
9 789
94 76680
94 766804
94 766805
94 766806
94 766807
94 766808
9 74980
Other products:
UNITOR FIRESHIELD PRO COMPL. XL
94 6548
94 60880
94 75565
Spare parts
GLOVES F/FIRESHIELD & FLAMEGUARD & FIRESHIELD PRO
FIREMANS GLOVES INSULATED
FIREMANS HELMET FUEGO RED
WITH FACE SHIELD AND NECK CURTAIN
56
12-03-10 10:13:59
Rescue equipment
Fire extinguishers
Fire hoses, couplings and nozzles
Personal protection equipment
Rescue equipment
Medical
Oil spill equipment
Systems
Service
12-03-10 10:14:11
Helideck Equipment
Helideck equipment in accordance with SOLAS Chapter II-2, Part G, Regulation 18:
For ships fitted with special facilities for helicopters it is required to have:
Powder extinguishers having a total capacity of not less than 45 kg
For example: x Fire extinguisher 5kg ABC
x Fire extinguisher 50kg ABC
CO extinguishers of a total capacity of not less than 8 kgs
For example: x Fire extinguisher kg on wheels.
x Fire extinguisher 9 kg on wheels.
x Foam application system consisting of monitors or foam making branch pipes
capable of delivering foam to all parts of the helideck in all weather conditions
in which helicopters can operate.
x Nozzles of an approved dual-purpose type (jet/spray) and hoses.
x Sets of firemans outfit with BA sets and an additional set of rescue products.
For more detailed information, please find table with options on the next page:
58
12-03-10 10:14:15
Helideck Equipment
Ordering information:
Product nr.
9 67467
9 60975
9 667550
9 66754
9 766840
Description
Fire extinguisher 5 kg ABC
Or:
Fire extinguisher 50 kg ABC
And:
Fire extinguisher kg CO
Or:
Fire extinguisher 9 kg CO
Additional equipment:
94 766 Marshalling baton at night for
responder C (6580)
on request Marshalling baton for daytime
9 766840 CO Lance for Helideck
PCS
PCS
PCS
PCS
PCS
SET
Optional
SET
SET
SET
PCS
PCS
Pair
Pair
PCS
PCS
PCS
Set
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
PCS
SET
PCS
1
6
PCS
SET
PCS
59
12-03-10 10:14:26
Lifejackets, Rigid
Description:
All three models in our Unitor Seaguard 00 range exceed the new IMO
requirements for lifejackets, valid from July 00 (MSC 8(70) Part , MSC
00(80), MSC 07(8)). In testing they out-performed the reference lifejackets for
all parameters.
In addition to satisfying the water test requirements, the lifejacket material and
construction have been subjected to rigorous tests for temperature cycling, oil
resistance and strength. Their compact and standardised design allows for easy
donning and reduces the necessary storage volume, making them ideally suited to
the requirements of passenger vessels.
Customer benefits
Approvals
Ordering information:
Type
Adult
Child
Infant
764845
60
12-03-10 10:14:36
Lifejackets, inflatable
Ordering information:
Product no.
8 670
8 67
8 679
Description
Worksafe 50N Inflatable lifejacket with light ( chamber)
Offshore 50N Inflatable lifejacket with light (twin chamber)
Interlock 75N Inflatable lifejacket with light (twin chamber)
Assesories:
Product no.
8 6745
8 677
8 675
Description
Recharge kit f/Worksafe lifejacket (incl. cartridge)
Recharge kit f/Offshore lifejacket (incl. cartridges)
Recharge kit f/Interlock lifejacket (incl. cartridges)
Worksafe 150N
Offshore 150N
Interlock 275N
6
12-03-10 10:14:46
Lifejacket light
The WAB-MX8 is a water-activated rescue light for attachment to Lifejackets and
Immersion suits.
The light is in compliance with the requirements of SOLAS LSA code res.
MSC 48(66) and certified to MED 96/98 and USCG.
Ordering information:
Product no.
8 67875
Description
WAB-MX8
Ordering information:
Product no.
8 57660
8 5766
8 57669
8 57667
Dimension
LxWxD
460 x 750 x 475
665 x 8 x 795
750 x 75 x 70
650 x 80 x 70
Number of
lifejackets
7
0
7
0
Weight
in Kg
5
47
NB: The number of lifejackets is based on the Unitor Seaguard 00 Lifejacket.
6
12-03-10 10:14:48
Immersion suits
Description:
Customer benefits:
All models have a yellow neoprene base material with orange outer layer
giving high visibility and increased rescue chances.
The attached gloves and hood ensure a faster donning.
The buddy line will enable you to attach to a fellow crewmember for extra
safety.
A face flap is attached for additional insulation.
SOLAS reflective tape is used for higher visibility.
Donning instructions printed on the suit and bag.
Guaranteed quality, each suit is pressure tested.
The suit is supplied in different sizes for the right fit.
The model V0 is the standard model produced of 5mm neoprene and is equipped
with a Buoyancy pillow, Helicopter lifting harness, Light and buddy line.
Therefore this suit can be worn without additional lifejacket.
The model V40, has the same features as the V0, but is produced of 7mm neoprene, given it a 0% less warmth emission, so recommend for using in very cold
areas.
The model V0 OP, is the same as the standard model, but is supplied without
buoyancy pillow, helicopter harness and light.
Therefore this suit must be worn with additional life jacket.
Approvals: All suits are MED (Wheelmark) approved. The V0 and V40 are also
Russian type approved.
Ordering information:
Product no.
80 740464
80 7859
80 6760
80 6760
80 78584
80 6768
80 6766
80 78600
80 7945
80 7944
Description
Unitor V0 size 45
Unitor V0 size 65
Unitor V0 size 85
Unitor V0 size 05
Unitor V40 size 65
Unitor V40 size 85
Unitor V40 size 05
Unitor V0 OP size 65
Unitor V0 OP size 85
Unitor V0 OP size 05
Size
(0 50 cm)
(60 85 cm)
(65 90 cm)
(85 0 cm)
(60 85 cm)
(65 90 cm)
(85 0 cm)
(60 85 cm)
(65 90 cm)
(85 0 cm)
6
12-03-10 10:14:54
Ordering information:
Product no.
8 67875
8 75886
8 766444
Description
WAB-MX8 Light
AQO Light
AQ Light
Description
Cabinet size
Cabinet size
Cabinet size
Cabinet size 4
Weight in Kg
5
47
Size (mm) l x b x h
460 x 750 x 475
665 x 8 x 795
750 x 75 x 70
650 x 80 x 70
BASIC
4 suits
suits
4 suits
6 suits
STANDARD
4 suits
0 suits
suits
6 suits
ARCTIC
4 suits
8 suits
0 suits
4 suits
64
12-03-10 10:15:01
Description:
Accessories
Ordering information:
Product no.
8 6799
8 68007
8 75985
80 60608
80 60609
80 6060
8 57670
8 7597
8 78595
Description
Lifebuoys ,5 kg
Lifebuoys 4, kg
Y Bracket for lifebuoy
Floating lifeline 0MTR
Floating lifeline 45MTR
Floating lifeline 50MTR
Electric Lifebuoy light
Electric Lifebouy light
Ex. Proof
Light Smoke Signal (MOB)
65
12-03-10 10:15:10
Cabinets
Cabinets
Wilhelmsen Ships Service supplies a large range of cabinets for all purposes as mentioned below,
Other dimensions can be supplied on request and will be specially made.
Product no.
Description
94 7064
95 477
95 4799
95 60579
95 758557
9 6895
9 546689
94 59576
50 770
8 57660
8 5766
8 57669
8 57667
95 546564
Outside Dimentions in mm
HxWxD
840 x 400 x 70
70 x 70 x 8
558 x 465 x 80
670 x 470 x 5
80 X 650 X 40
X 76 X 8
670 x 740 x 80
50 x 640 x 40
600 x 90 x 686
460 X 750 X 675
665 x 8 x 795
750 x 75 x 70
650 x 80 x 70
= 0 mm, L = 900 mm
95 546564
94 7064
95 4799
95 60579
66
12-03-10 10:15:16
Cabinets
Cabinets
9 6895
9 546689
50 770
94 59576
8 57667
67
12-03-10 10:15:23
Rescue Tools
Rescue Tools
Product no.
94 8446
94 8444
94 7686
94 576660
94 5555
94 7684
94 7554
94 54958
94 54966
94 5559
94 6876
94 5880
94 68965
94 6897
94 6580
94 6588
87 L599
9 84408
7 905067
7 905075
9 790
9 76867
9 787
9 55550
94 5755
94 59576
9 546689
94 7560
Description
Safety Belt f/lifeline
Lifting harness safety equipment
Lifeline m w/hook, incombustible
Signal plate for lifeline
Fire Axe w/7" Shaft
Fire Axe w/4" Shaft
Fire Axe w/" Shaft
Fire Axe w/insulated shaft
Bracket f/Fire Axe w/insulated shaft ( pcs required)
Cover f/Fire Axe
The Wolflite safety lamp H-5A is a rechargeable lamp with
a class I MCA approval. The explosion-proof category is
EX II GD Eex eib IIC T4
Batt. charger F/H-5A
Battery pack for H-5A
Spare bulb for H-5A
The new Responder features a prefocused Xenon bulb, and is
rated at 0,000 peak beam CP. The Responder also features a
dual switch - turn the light on and off by twisting the head or
by pressing the handy push-button tail switch. The water tight
and chemical resistant case includes a belt clip, heavy-duty
lanyard, and key ring. This light is powered by C batteries
(included). UL listed for hazardous locations and submersible
to 5 ft. The explosion-proof category is II G Eex ib e IIB T
Spare batteries for the responder, (pack of 0)
Spare bulb for RESPONDER
Oxy-acetylene cutting equipment is a necessary part of the
emergency equipment on board. This equipment is easy to
carry and has a cutting capability up to 00 mm (4"). The
components are interchangeable with the standard UNITOR
welding and cutting set. Excluding A5 and O5 cylinders
A-5
O-5
Electric drill with 6 mm chuck.
Drill bit 6 mm.
Cable drum with 5 m cable.
The stroke bar and the crow bar enable the fire fighter to force
open doors and clear away obstacles.
Stroke bar
Crow bar
The Fireman's Cabinet, made from fibreglass with stainless
steel fittings will keep the smoke diving equipment dry and
ready for immediate use. Complete with brackets for spare
cylinders. Dimensions (cm) H x W x D: 05 x 55 x 40
Storage chest for heli-deck emergency equipment.
Fibreglass with stainless steel fittings.
Dimensions (cm) L x W x D: 800 x 670 x 0
The Fire Blanket is approved according EN 869.
Fire Blanket size 0 cm x 80 cm, flat pack.
68
12-03-10 10:15:32
Safety Belt
Description:
The safety belt is approved to BSEN 58 and is in compliance with FSS code
chapter , (personal protection) item .. which describes the use of a lifeline in
combination with a safety belt.
Approved according to BSEN 58
Weight: 0,4 kgs
Width of webbing 45 mm
Ordering Information:
Product no:
94 8446
Decription
Safety Belt
Weight
0,4 kg
Width webbing
45 mm
Harness
Description:
Data:
Accredited to:
Web Material:
Fittings:
Weight:
Features:
EN 6
45mm water repellent polyester.
High tensile steel alloy
0.75 kg
Rear attachment point, adjustable leg straps
Ordering Information:
Product no:
94 8444
Decription
Lifting harness
Weight
0,75 kg
Width webbing
45 mm
Lifeline
Description:
The Lifeline is fitted on one end with a socket and the other end with a carabineer
hook and is of incombustible material.
The standard length supplied is meter.
Other lengths are available on request.
Ordering Information:
Product no:
94 7686
Decription
Lifeline with hook incombustible
Length
m
69
12-03-10 10:15:39
Tripod's
Description:
Durable and robust, this -way winch block has been designed to give maximum performance without
sacrificing safety. The speed of raising and lowering is limited to 4m/min, making this block the essential
rescue and general purpose block
The block can also be fitted to the Tripod for use in confined access industry, as it can lower an operative
into an area where no ladders are fitted.
According to flag regulations winches need to be maintained and certificated periodically.
This period is not to exceed one year.
Ordering Information:
Product no:
94 76470
Decription
Winch/fall arrest block
Lenght
5m line
Weight
,4 kg
Accredited
EN 60 and EN 497
Aluminium Tripod 1
Description
Technical data:
Accredited to:
Material:
Connector:
Weight:
Features:
Min/ max
height range:
Packed length:
Span diameter:
SWL:
EN 795
Aluminium cast & extruded frame
N/A
7.6 kg
Portable and universally adjustable.
Unique elliptical design preventing twist
.68m .67m
(66" 05)"
.7m (54")
.8m
00 kg
Ordering Information:
Product no:
Decription
94 76488
94 76496
Length
.7m packed
/ Span ,8m
Weight
Accredited
7,6 kg
EN 795
0,5 kg
70
12-03-10 10:15:43
Pyrotechnics
Pyrotechnics
Pyrotechnics
Wilhelmsen Ships Services range of high quality marine distress signals consists of approved brands. All products exceed both
SOLAS requirements and national authorities specifications. Specific brands and delivery time must be checked with the port of
delivery due to local transportation rules and regulations for pyrotechnics.
Ordering information:
Product no.
8 78595
8 750754
8 750758
8 750760
8 79090
Description
Light Smoke Signal (MOB)
Hand Flare, Red
Parachute Rocket, Red
Buoyant Smoke signal min.
Line-throwing Device
Red handflare
7
12-03-10 10:15:57
Pyrotechnics
Lifebuoy Light
Ordering information
Product no.
8 57670
8 7597
Description
Electric Lifebuoy light
Electric lifebuoy light ATEX approved
Description
Wilhelmsen Ships Service delivers emergency rations and drinking water from approved manufacturers. The composition and
packaging meet all the international requirements, including the latest amendments to chapter III of the SOLAS regulations.
The ingredients used are acceptable to all cultures and religions.
Ordering information:
Product no.
8 750756
8 60607
Description
Food ration 0,5 kg pack
Drinking water 5x00ml pack
7
12-03-10 10:16:01
Stretchers
Stretchers
Ordering information:
Product no.
80 5757
Description
Paramedic Rescue Pac
Neil Robertson
Ordering information:
Product no.
80 8490
Description
Neil Robertson stretcher complete
7
12-03-10 10:16:06
IMO Signs
SOLAS, Chapter III, Regulation 9... requires signs to be "easily seen under emergency lighting
conditions." Regulation 9... requires symbols to be used "in accordance with the recommendations of
the Organization."
The unique ability of Unitor Photo luminescent signs to illuminate immediately if power loss occurs
will greatly assist personnel in the location of emergency equipment.
IMO Regulations recommend that the location of emergency equipment, assembly and embarkation stations should be plainly
indicated by the use of appropriate symbols.
MCS/CIRC.777 states that "Assembly Station" has the same meaning as "Muster Station".
Letters or numbers should be used to identify assembly or embarkation stations.
The station letter or number should be placed on the right hand side of the safety sign, and should be compatible in its
dimensions.
Signs shown in the appropriate sequence can be displayed at the Coxswain's position in a totally enclosed lifeboat, as a reminder
of the sequence of actions which should take place during the launching of a lifeboat.
Symbols should be used inside survival craft adjacent to the relevant control or function to which they refer.
Lifeboat
Liferaft
Davit launched
liferaft
Lifejacket
Child's
lifejacket
Lifebuoy
Lifebuoy with
light and smoke
Lifebuoy
with line
Lifebuoy
with light
55 C
555 C
5556 C
5590 C
5508 C
5540 C
557 C
5557 C
5565 C
Rescue boat
Embarkation
ladder
Evacuation
slide
Evacuation
chute
Scramble
net
Survival craft
portable radio
EPIRB
Radar
transponder
Survival craft
distress signal
55 C
557 C
5549 C
7590 C
759 C
556 C
554 C
55 C
5599 C
Fasten
safety belts
Secure hatches
Start engine
Line throwing
appliance
EEBD
Smoke hood
Immersion suit
55406 C
5544 C
5540 C
55448 C
55807 C
5580 C
L5588 C
L784 C
558 C
Lower liferaft
Lower
rescue boat
Release falls
Start
water spray
Start
air supply
Release gripes
55844 C
55455 C
554 C
5598 C
5547 C
5546 C
Rocket
Lower lifeboat parachte flares
74
12-03-10 10:16:20
L576 P
L577 P
L579 P
L586 P
L588 P
5556 P
55570 P
55588 P
55596 P
55604 P
556 P
Examples of identifying
stations with a
compatible size.
5564 C
C size
P size
Q size
G size
L857 G
L86 G
75 G
755 G
759 FSG
7544 G
75 G
758 G
754 G
750 P0
7547 FSG
Sign Sizes:
C = 50 x 50 mm, G = 00 x 50 mm, L = 00 x 00 mm, P = 50 x 75 mm, P0 = 00 x 00 mm, Q = 00 x 00 mm.
Material:
Regular signs are available in photoluminescent self adhesive vinyl.
Wall mounted double sided and panoramic signs are available on photoluminescent rigid PVC.
55 G
C size
P size
C size
L585 G
750 G
7505 G
7508 G
L589 G
7504 G
L58 G
L580 G
P size
75
12-03-10 10:16:37
75049 G
7504 G
7507 G
75076 G
75055 G
75058 G
7506 G
75070 G
75067 DSG
75064 DSG
Panoramic sign
7507 DSG
7505 P0
75046 FSG
75040 FSG
76
12-03-10 10:16:49
Fire hose
Fire alarm
Fire telephone
L784904 C
L784905 C
L786784 C
75094 C
L7860 C
75079 C
7508 C
Panoramic signs
L786785 P0
7844 E
75088 P0
7509 P0
7500 E
75097 P0
L5440 M
L704 E
L549 M
L548 M
75085 M
Doctor/paramedic
Stretcher
Emergency shower
Emergency
eye wash
Emergency
telephone
L57 C
754 C
L574 C
L579 C
7506 C
75 C
Breathing
apparatus
Hand washing
facility
Emergency stop
Automatic external
defibrilator
758 C
7509 C
L85 C
75 C
755 C
750 C
77
12-03-10 10:17:03
7577 PT
7568 Q
7565 G
7586 Q
757 PT
758 PT
7580 PT
7589 PT
7574 PT
Prohibition Signs
No mobile
phones
No radio
transmitters
No drinking
or eating
Not drinking
water
No entry
L5450 C
7550 C
756 C
7559 C
L5456 C
No smoking
No naked flames
No escape
Lift prohibited
No thoroughfare
L78564 C
L5446 C
7556 C
L786786 C
755 C
Sign Sizes:
C = 50 x 50 mm, G = 00 x 50 mm, L = 00 x 00 mm, P = 50 x 75 mm, P0 = 00 x 00 mm, Q = 00 x 00 mm.
Material:
Regular signs are available in photoluminescent self adhesive vinyl.
Wall mounted double sided and panoramic signs are available on photoluminescent rigid PVC.
78
12-03-10 10:17:13
Wear head
protection
Wear
mask
Wear
respirator
Wear eye
protection
Wear hand
protection
Wear face
shield
L5599 C
L58 C
L98
7508 C
7846 C
750 C
7596 C
Use welding
mask
Wear hight
visibility clothing
Wear protective
clothing
Wear
lifejacket
Wear foot
protection
Wear safety
harness
6596 C
754 C
7599 C
75 C
757 C
6570 C
7505 C
Sign Sizes:
C = 50 x 50 mm, G = 00 x 50 mm, L = 00 x 00 mm, P = 50 x 75 mm, P0 = 00 x 00 mm, Q = 00 x 00 mm.
Material:
Regular signs are available in photoluminescent self adhesive vinyl.
Wall mounted double sided and panoramic signs are available on photoluminescent rigid PVC.
79
12-03-10 10:17:20
Hazard Signs
Explosion risk
Flammable risk
Oxidization risk
Slippery surface
Risk of falling
L544 C
7548 C
7587 C
7557 C
7566 C
757 C
Steep steps
Trip hazard
Overhead loads
Overhead working
7569 C
756 C
755 C
7578 C
7560 C
758 C
Radioactive risk
Laser risk
Corrosive risk
Toxic risk
Biological risk
654 C
75 C
65404 C
754 C
756 C
7545 C
Noise risk
Electrical risk
Machinery risk
7554 C
759 C
757 C
7575 C
750 C
7584 C
Sign Sizes:
C = 50 x 50 mm, G = 00 x 50 mm, L = 00 x 00 mm, P = 50 x 75 mm, P0 = 00 x 00 mm, Q = 00 x 00 mm.
Material:
Regular signs are available in photoluminescent self adhesive vinyl.
Wall mounted double sided and panoramic signs are available on photoluminescent rigid PVC.
80
12-03-10 10:17:30
SOLAS Tape
Wilhelmsen Ships Service has types of SOLAS tape, type only approved
according SOLAS and type approved with the MED (Wheelmark)
Unitor Solas Retro Reflective Tape MED approved, is intended for reflectorizing
Solas life support equipment such as life vests, jackets, and rafts.
It conforms to, IMO Res. A.658 (6) and meets U.S. Coast Guard specification
46 CFR Part 64, Subpart 64.08/5/0. It is approved by numerous national
authorities around the globe including the Wheel Mark and Bureau Veritas.
Unitor Solas Tape is an encapsulated lens type sheeting with a flexible and highly
transparent plastic film. Our tape has been specially designed for the marine
industry. It ensures long durability, high brightness and antidelamination. All
products are comprised of an encapsulated lens optical design that provides high
reflectivity over a wide range of entrance angles, whether dry or wet. All products
are silver in color under daytime viewing conditions and reflect a bright white.
Ordering information:
Product no.
84 60606
Part Description
RETROREFLECTIVE SOLAS TAPE (WITH APPR.)
Size
50MM X 45 MTR
Impa number
.086
Unit
ROL
8
12-03-10 10:17:31
Inflatable Liferafts
Liferafts
Wilhelmsen Ships Service can deliver a complete range of liferafts from main stock locations. The range includes both throwoverboard and davit launch.
We are also able to offer specialist application liferafts and Evacuation systems for passenger vessels, the offshore industry, USCG
variations or extended service.
Whether you want to purchase or take advantage of the Wilhelmsen Ships Service fixed rental system we have a solution to meet
your needs.
Throwoverboard
Part No
6 persons
8 persons
0 persons
persons
6 persons
0 persons
5 persons
Rental
75909
75900
7598
7596
7594
7594
75959
Purchase
75804
75805
75806
75807
75808
75809
75800
Rental
75967
75975
7598
7599
Purchase
75800
7580
7580
7580
Davit Launch
Part No
Persons
6 persons
0 persons
5 persons
All liferafts that are delivered conform to MED\Ships Wheel or USCG as required.
All liferafts have 46m Standard painter line length fitted suitable for 6m max drop
height
Liferaft Ancillaries
Hydrostatic Release Units
Part No EDP 75075
Hammar H0 HRU
For automatic release systems contact your local customer centre
6 person
8 person
0 person
person
6 person
0 person
5 person
length (mm)
Dia (mm)
60
60
56
56
08
08
08
485
485
584
584
685
685
685
length (mm)
Dia (mm)
56
08
08
08
584
685
685
685
A Pack
Weight (kg)
76
80
99
08
44
60
80
Davit Launch
Liferaft Stowages
Wilhelmsen Ships Service offer a full range of cradles for sizes and types
please contact your wilhelmsen Ships Service Customer Centre
person
6 person
0 person
5 person
A Pack
Weight (kg)
4
6
85
8
12-03-10 10:17:51
Inflatable Liferafts
Liferafts
Liferaft Rental
Customer Benefits
8
12-03-10 10:17:51
12-03-10 10:17:56
Medical
Fire extinguishers
Fire hoses, couplings and nozzles
Personal protection equipment
Rescue equipment
Medical
12-03-10 10:18:10
Medical Equipment
Medical Equipment
Wilhelmsen Ships Service offers a selected range of medical products for the
merchant fleet.
All medicine chests and poison treatment chests are supplied based on number of
crew ship-type and flag.
In addition we offer a range of first aid kits according international regulations.
The chests are supplied with separate Neil Robertson stretcher as follows:
85 8490
85 75594
Heartstart (AED)
DEFIBRILLATOR HEARTSTART WITH PADS AND SOFTCASE
Note:
When ordering this equipment, please mention Flag of Vessel and quantity of persons on board.
Supply of Narcotics is restricted, as it is not possible to ship to other countries.
Defibrillator On Board
86
12-03-10 10:18:17
Medical Equipment
Resuscitator
Description:
Product Features;
Soft carrying bag, which can be used as a pillow for the patient.
The MOX- cylinder is accepted worldwide due to PISS valve fitted (Pin Index Safety System).
Customer Benefits:
The MOX- cylinder is a part of Unitor global cylinder exchange system and can be exchanged in the most common ports where
refilling is no longer allowed or takes normally -4 weeks.
The exhange system secures faster service and less traveling costs when refilling of oxygen is required.
Technical Data:
Overall length
Height
Weight
50 mm
0 mm
5, kg including Unitor MOX- cylinder
Ordering information:
Product no.
80 65
79 90568
Description
RESUSCITATOR WITHOUT CYLINDER
BREATHING OXYGEN MOX- FILLING
Spare parts:
Product no.
80 6580
80 76967
80 6598
80 6564
80 608455
80 657
80 69808
698 64775
Description
BAG FOR RESUSCITATOR SET
ADJ REDUC VALVE + YOKE
VENTILATOR W/MASK, RESERVOIR, TUBING
HEAD HARNESS
GUEDEL AIRWAYS SET X SIZES , , 4
EXTENSION TUBE W/ADAPTER
SPARE SEAL FOR PISS VALVE (PIN INDEX SAFETY SYSTEM)
KNOB MANIPULATOR (TOOL F/OPENING PISS VALVE (5 PCS)
87
12-03-10 10:18:20
Medical Equipment
Description:
Unitor Medical Oxygen System meets the latest IMO IMDG/MFAG regulations for
shipboard use to supply Oxygen to two persons at the same time.
Wilhelmsen Ships Service has three solutions, which meet the IMDG/FMAG
amendment as some Flag states require cylinder to be installed outside the
Hospital and some require the safety valve outlet from the regulator to be lead to
open air by piping.
In the IMO Bedside solution, the oxygen cylinder is placed between two beds,
mounted against the bulkhead with the cylinder rack. The regulator with a fixed
flow of 50 liters/min, is mounted on top of the cylinder and the rail is mounted
on the bulkhead. The double oxygen outlet is fixed to the rail and the hose is
connected to the regulator. Two flow meters, with quick connections, are placed in
the double oxygen outlet, which enables the oxygen flow to be regulated between
0- liters/min. A humidifier is connected to each flow meter and this has a
disposable oxygen therapy mask attached to it.
IMO outside solution, the oxygen cylinder is placed in the cylinder rack and is
either mounted directly on the bulkhead or in a cabinet. The gas is piped through
to the ships Hospital and the internal equipment is as described above.
IMO Norwegian solution, the cylinder is fitted as described by IMO Bedside,
however the regulator is different to fit a pipe onto the safety valve of the
regulator, which need to be lead to open air and the internal equipment is as
described above.
Product Features:
Customer Benefits:
The installation can be completed without any trouble during a voyage and can
easily be performed by the Crew.
separate flow meters that provides independent flows to each patient.
Unitor deposit cylinders (MOX-, MOX-5 and MOX-40) can be refilled/exchanged. Refilling of vessel owned cylinders with medical gases is becoming complex, time consuming and in some areas even impossible.
The equipment is available in our extensive Network
Future service is supported by our service organization including replacement of
components.
Technical data:
Imo Bedside system excluding cylinder packet in Box
Imo Outside system excluding cylinder packet in Box
Imo Norwegian system excluding cylinder packet in Box
5x5x55
5x5x55
5x5x55
Weight: 9,0 Kg
Weight: , Kg
Weight: 0, Kg
88
12-03-10 10:18:22
Medical Equipment
Components:
Product no.
6 058
79 90567
8 60844
8 608406
Item no.
4
Qty
8 59679
8 5966
8 6088
8 59640
8 7658
5
6
7
8
9
Description
RACK FOR CYLINDER
BREATHING OXYGEN MOX-40 FILLING
REGULATOR W/QUICK COUPLING
DOUBLE OUTLET 0. F/RAIL W/HOSE AND
MALE COUPLING
FLOWMETER FOR GAS OUTLET 0- L/MIN
HUMIDIFIER 0,5 L
OX THERAPY MASK DISPOSABLE (0 PCK)
RAIL -SLIT
SIGN 'OXYGEN'
Components:
Product no.
6 058
79 90567
8 596
8 500
8 6845
8 596445
Item no.
4
4a
5
Qty
8 59640
8 67886
6a
6
8 5966
8 6088
8 6508
7
8
9
8 6064
8 7658
8 6887
0
Optional
Description
RACK FOR CYLINDER
BREATHING OXYGEN MOX-40 FILLING
ADAPTOR WITH BRACKET
REGULATOR OXYGEN
ADAPTOR 8MM >/8" BSP
GAS OUTLET MC 70 O FOR BULKHEAD
MOUNTING
RAIL
FLOWMETER F/RAIL MOUNTING 0-
L/MIN HOSE/MALE COUPLING
HUMIDIFIER 0,5 L
OX THERAPY MASK DISPOSABLE (0 PCK)
HIGH PRES. HOSE OX YOKE
/ W.8 X /4" MTR
T-PIECE W/OX. QUICK COUPLINGS
SIGN 'OXYGEN'
CABINET IMO MEDOX F/ CYL STEEL
Pipes and couplings are a part of the Yard supply, and can be delivered on request.
89
12-03-10 10:18:25
Medical Equipment
Components:
Product no. Item no.
6 058
79 90567
8 6508
8 596
4
8 500
5
8 608406
6
8 6587
7
8 59640
8
8 59679
9
8 5966
0
8 6088
8 7658
Qty
Description
RACK FOR CYLINDER
REATHING OXYGEN MOX-40 FILLING
HIGH PRES. HOSE OX YOKE / W.8 X /4" MTR
ADAPTOR WITH BRACKET
REGULATOR OXYGEN
DOUBLE OUTLET O FOR RAIL MOUNTING
QUICK COUPLING OXYGEN TO G /8"
RAIL -SLIT
FLOWMETER FOR GAS OUTLET 0- L/MIN
HUMIDIFIER 0,5 L
OX THERAPY MASK DISPOSABLE (0 PCK)
SIGN OXYGEN
Ventilation Equipment
The Unitor Ventilation equipment according IMDG/MFAG is required in addition
to the Medical Oxygen System and is supplied in a package of two.
Product Features
The ventilation equipment can easily be connected to the Unitor resuscitator set
and Medical Oxygen systems.
Customer benefits
Equipment is delivered in handy carrying bags, easy to take to each patient.
Replacements available in many Unitor ports.
All parts easy to clean and sterilize.
Ordering information:
Product no.
8 70864
Description
MANUAL VENTILATION EQUIPMENT (set of pcs)
Description
ADAPTOR YOKE O TO W.8
SPARE SEAL FOR PISS VALVE (PIN INDEX SAFETY SYSTEM)
Please note: Medical oxygen systems and Nitrous Oxide systems with manifolds
for larger amount of cylinders including alarm systems for low pressure specially
used for Cruise Vessels, can be supplied on request.
90
12-03-10 10:18:36
Fire extinguishers
Fire hoses, couplings and nozzles
Personal protection equipment
Rescue equipment
Medical
Systems
Service
12-03-10 10:18:48
Regulation Requirements
The requirement of OPA'90 is that tankers 400 ft or greater in length which is carrying oil in bulk shall have equipment to handle a
barrels (900 litres) of deck spill. Tankers under 400 ft must be equipped to deal with 7 barrels (00 litres), while in-land oil barges
must be able to deal with at least barrel.
Description:
Depending on ,7 or barrels capacity the Unitor Oil Spill Kits can be composed as following:
12 Barrel kit
Yellow box included roll of Plastic Bags, pcs Sorbent Pads U9400, 6 pcs Spill Kit Gloves, 6 pcs - Time Suits, 6 pair of Safety
Boots, 5 litres Aquabreak PX (waterbased cleaning chemical), pcs Jet Spray, 5 litres Natural Handcleaner
pcs Oil Spill Kit Bag 000 litres, 8 pcs Sorbent Booms U9440S
pcs Oil Spill Kit Bag 000 litres, pck Sorbent Pads U9450, pck Sorbent Rolls U9450S
7 Barrel kit
Yellow box included roll of Plastic Bags, pcs Sorbent Pads U9400, 6 pcs Spill Kit Gloves, 6 pcs - Time Suits, 6 pair of Safety
Boots, 5 litres Aquabreak PX (waterbased cleaning chemical), pcs Jet Spray, 5 litres Natural Handcleaner.
pcs Oil Spill Kit Bag 000 litres, 8 pcs Sorbent Booms U9440S
1 Barrel kit
Yellow box included roll of Plastic Bags, pcs Sorbent Pads U9400, 6 pcs Spill Kit Gloves, 6 pcs - Time Suits, 6 pair of Safety
Boots, 5 litres Aquabreak PX (waterbased cleaning chemical), pcs Jet Spray, 5 litres Natural Handcleaner
Product features:
Each kit contains the necessary absorbent material to control oil spills from ,7 up to barrels. Sorbents are made of polypropylene
which absorb oils but repel water. This water repelling property causes the material to float even when fully saturated with oil.
Customer benefits:
Designed to be deployed easily and effectively with each shipss response plan as required by the IMO and OPA90. For replenishment, all types of sorbents and equipment are available as separate items through the Wilhelmsen Ships Service worldwide
network.
For specifications on the different sorbents, please find these on page 970.
Ordering information:
Product no.
940 5977
940 5977
940 59745
94 6044
Description
Complete barrel kit
Complete 7 barrel kit
Complete barrel kit
Sorbent kit 7 barrel
9
12-03-10 10:18:56
Description:
Product features:
kg
05x60x70cm
Yellow
High quality PE
Ordering information:
Product no.
940 5975
Description
Oil Spill Kit Plastic Box
Description:
Product features:
Customer benefits: Ultra light-weight and at the same time tough and
durable. Easy to operate.
Technical data:
Material:
Size:
Color:
Weight:
Temp Range:
Polypropylene
4x40x59 mm (with x depth x length)
Various
640 grams
-0 + 80oC
Ordering information:
Product no.
940 60749
Description
Safety shovel - large blade
9
12-03-10 10:19:04
Other Options:
Product no.
940 607440
940 60744
940 60744
940 60744
Description
Plastic Bucket 0 ltr.
Squeegee w/wooden handle 60mm wide
Plastic Spatula - 4" blade 00 x 50 mm
Plastic Scoop 8 x 87x 0 mm
Non-Sparkling Pump
Product name:
Description:
Model 50 is a double diaphragm pump that can take on the heavier, more viscous materials and pump them faster with greater
tolerance for suspended solids. Ideal for oil spill response. Model 50 has an air valve system that is 00% serviceable without
disassembly of the wetted parts. This saves valuable maintenance time.
Product features:
Easy connections
Service made easy
Limited number of parts
Customer benefits:
Ideal for oil spill response and all types of transfer applications. Safe access to the ships air line and enables the pump to be set up
almost everywhere. Its construction ensures a long life.
Technical data:
Size LxWxH (mm)
Capacity
Max fluid pressure
Handles viscosity up to
Max operating temperature
Weight
Body
Seats/guide
Balls
Diaphragms
55x44x8
568 l/min
8.4 bar
0000 cps
65,5C
6. kg
Aluminium
Hytrel
Acetal
Hytrel
Ordering information:
Product no.
4 60496
Description
Double Diaphragm pump 50 Capacity 570 ltr./min
94
12-03-10 10:19:21
Sorbent Kit
Description:
The Unitor Sorbent Kit 7 Barrel contains sorbents with a total absorbing capacity of approximately 7 barrels of oil. The Sorbent Kit
consists of various types of sorbents such as booms, pillows and pads for use at any oil spill location on board a vessel. Special
chemical absorbing pads are also a part of the kit. A mini kit containing sorbents with total absorbing capacity of / barrel of oil is
also available. For replenishment, all types of sorbents are available as separate items through the Wilhelmsen Ships Service worldwide network.
Product features:
The sorbent kits are ready for quick application, consisting of different product types, and can be re-filled. Absorbs from 0-5 times
their own weight depending on the viscosity of the oil.
Customer benefits:
Ideal solution to every spill situation on land or water, easy to handle, high absorption capacity, cost effective.
Ordering info:
The 7 barrel sorbent kit consists of:
Product no.
94 6040
94 604
94 6046
94 604
94 59766
94 59758
94 5975
Description
Unitor mini kit / barrel
Sorbent pillows U9440P
Sorbent pads U9400U
Sorbent sweep U94800
Sorbent booms U9440S
Sorbent pads U9400
OSK plastic box
Quantity
Description
Sorbent pads U9400
Sorbent pillow U940P
Quantity
Complete kits:
Product no.
94 6044
94 6040
Description
Unitor sorbent kit 7 barrel
Unitor mini kit / barrel
95
12-03-10 10:19:27
Pillows
Description:
Absorbs large quantites of oil in confined areas. Suitable for protecting vulnerable
access points and prevent spill penetration.
Product features:
Absorb all types of oil and hydrocarbons, repel water, high absorption capacity.
Customer benefits:
Very compact, employable in hard-to-reach-places. Easy to handle.
Description
Pillow U940 P
Pillow U9440 P
Pillow U9440 P
Unit
PCK
PCK
PCK
Quantity
0 pcs
40 pcs
pcs
Size
46cmx0cm
46cmx0cm
46cmx0cm
kg
8.6
7.
5.9
Sweep
Description:
Has built in tension straps, which are used to sweep broad rainbow sheens or surface
spills on water.
Product features:
Multi layer (SMS) quality, very strong, absorbs oil and hydrocarbons, repels water.
Customer benefits:
Easy to handle, protects the environment. Can be incinerated to reduce waste.
Description
Sweep U94800
Unit
PCK
Quantity
pcs
Size
0mx46cm
kg
6.4
96
12-03-10 10:19:29
Booms
Description:
Can be joined together into any length for use in a variety of marine and industrial
applications.
Booms prevent spreading and stop the oil from getting into the sea
Product features:
Filled in with 00% polypropylene, equipped with strong sock/net and metal hooks,
absorb all kind oil and hydrocarbons
Customer benefits:
Very strong, quick and effective oil absorption, will float, even when fully saturated. Easy to handle, protects the environment.
Can be incinerated to reduce waste.
Ordering information and technical data:
Product no.
94 59766
94 607
94 60
Description
Booms U9440 S
Booms U9440
Booms w/net
U9480 SN
Unit
PCK
PCK
PCK
Quantity
Size
4 pcs (single) mxcm
4 pcs (double) mx0cm
4 pcs
mx0cm
kg
6,4
,8
9
Particulate
Description:
Chopped sorbent material for scattering over floors and walkways or broadcasting over open water.
Product features:
00 % polypropylene, chopped material, absorbs oil based liquids.
Customer benefits:
Flexible application: for scattering over floors, broadcasting over open water and for
use in filter fences. Easy to handle, protects the environment. Can be incinerated to
reduce waste.
Description
Unit
Quantity
94 6074
Particulate U94
PCK
pcs
Size
Bag of
. kg
kg
,
0
97
12-03-10 10:19:31
Drumtoppers
Description:
Drum top covers made of polypropylene fibers with high absorbing capacity.
Pre-cut to fit with bunghole.
Product features:
High absorbing capacity, due to pre-cut design. Easy to use.
Customer benefits:
Keep barrels and drums clean and protect the surrounding area by absorbing spill
and drips. Can be incinerated to reduce waste.
Ordering information and technical data:
Product no.
94 60559
Description
Drumtoppers
U949
Unit
Quantity
Size
kg
PCK
5 pcs
56cm
.8
46
Rolls
Description:
Can be trimmed to fit specific space requirements. Easy to tear off the length
needed, useful for various applications.
Product features:
Available in many sizes, absorbs oil based liquids, high absorption capacity
and retaining.
Customer benefits:
Can be used on land or water, easy to use. Will float, even when fully saturated.
Can be incinerated to reduce waste.
Ordering information and technical data:
Product no.
94 5974
94 608
94 609
94 6009
Description
Rolls U9450 S
Rolls U9450
Rolls U9400
Rolls U9400 S
Unit
PCK
PCK
PCK
PCK
Quantity
pcs
pcs
pcs
pcs
Size
44mx48cm
44mx97cm
88mx97cm
88mx48cm
kg
7,
7,
7,
7,
Rolls U9460
Rolls U9460 S
PCK
PCK
pcs
pcs
44mx97cm
44mx48cm
7,
7,
0
0
Static resistant
94 606
94 604
98
12-03-10 10:19:36
Pads
Oil-Only Pads
Ordering information and technical data:
Product no.
Description
94 597 Pads U9450 white
94 6067 Pads U9400 white
94 59758 Pads U9400 white
94 6075 Pads U940 white
Unit
PCK
PCK
PCK
PCK
Quantity
50 pcs
00 pcs
00 pcs
00 pcs
Size
97cmx86cm
48cmx4cm
48cmx4cm
0cmx0cm
kg
7.
8.6
8.6
.6
Pads
Chemical Absorbent:
Description:
Square pads based on polypropylene fibers with a very high absorbtion capacity.
Suitable for absorbtion of oils, coolants, solvents and water. Will keep its shape even
when fully saturated.
Product features:
High absorption and retaining capacity.
Customer benefits:
Saves costs and reduces the workload of cleaning up.
Ordering information and technical data:
Product no.
94 6046
Description
Pads U9400 U
Yellow
Unit
Quantity
Size
kg
PCK
50 pcs
48cmx4cm
.5
5.5
Pads
Static resistant
Pads U9485
Pads U94850
Description:
Square static resistant sorbent pads which are the ideal solution for safe absorbtion
of flammable fluids. The pads are quickly deployed and easy to recover.
Product features:
Ensures safe absorption of flammable fluids.
Customer benefits:
Save costs and work on cleaning-up.
Ordering information and technical data:
Product no.
94 6090
94 6008
Description
Pads U9485
Pads U94850
Unit
PCK
PCK
Quantity
5 pcs
50 pcs
Size
5cmx4cm
48cmx4cm
kg
.
.
99
12-03-10 10:19:40
12-03-10 10:20:13
Systems
Fire extinguishers
Fire hoses, couplings and nozzles
Personal protection equipment
Rescue equipment
Medical
Oil spill equipment
Systems
Service
12-03-10 10:21:15
General:
Unitor 0 Clean Agent Fire Extinguishing System is designed as a total flooding
system for Machinery Spaces of Category A, Cargo Pump Rooms on tankers,
Cargo Compressors Rooms and Other Spaces needing fire protection.
It fulfils requirements of IMO MSC/Circ. 848 and MSC./Circ.67, and is equivalent
to Fire Extinguishing Systems required by SOLAS 974 as amended, Chapter II-.
The system can be applied on merchant marine and offshore structures as design
is in accordance to SOLAS and IMO MODU Code.
0
12-03-10 10:21:21
Modular:
Central:
Technical Data:
The Unitor 0 Clean Agent Fire Extinguishing System comprises Novec 0
liquid, stored in steel cylinders, pressurised with nitrogen to 4.5 bar at C,
connected via cylinder valves, flexible hoses or pipes to distribution pipelines with
discharge nozzles.
The cylinder valve assembly can be equipped with a supervisory pressure
switch connection for monitoring cylinder pressure, a pressure gauge and a
safety bursting disc. By different actuator, valves can be actuated by electrically,
pneumatically or manually by handle.
Depending on the application storage place accessibility following types of
installation can be used:
Modular system when cylinders are stored directly in protected compartments;
Central system, when requested amount of extinguishing fluid is stored in
central bank of cylinders out of protected spaces and distributed as need via
distribution vales;
Combination of above.
All components are designed for optimum system performance, allowing weight
and installation costs to be lowered. Time delay and pre-discharge alarm is
provided as per Rules requirement.
Cylinders
Volume: 4 to 45 litres
Storage pressure: 4.5 bar at C
Material: steel
Standards: EN or US DOT
Certificates: all major classification
societies
Nozzles
Material: brass, suitable for applications up
to 95C.
Sizes: / to /
0
12-03-10 10:21:27
System Description:
Unitor Water Mist Fire Extinguishing System consists of high pressure pump unit and/or
cylinders, section valves, piping system and nozzle heads.
Its uniquely designed high pressure nozzles give flexible discharge patterns and capacity.
The nozzles are compact with no moving parts. The system has the markets best design
parameters, largest nozzle spacing and lowest volumetric flow rate.
Water is supplied via a pump unit or cylinders depending on applications. Both are able
to supply all water mist applications onboard through the variety of different section
valves operated either remotely or manually.
A touch screen operational panel can be installed for easy operation and monitoring.
Unitor Water Mist Fire Extinguishing System is installed as a total flooding system or
local protection of high risk areas. It provides several methods for fire detection and
activation.
The system can be installed with glass bulb nozzles, which contains detection bulb glass
able to release the system automatically at early stage of a fire.
For accommodation areas, the system can be activated both automatically and manually.
For the protection of machinery spaces and local risk areas, system can be installed with
open nozzles with a detection system to operate manually for total flooding or local protection of high risk areas. Additionally, protection for both the galley ducts and fat fryer
are available through a localised compact water system.
The system design is accepted by the rules and allows for the use of both fresh and
sea water.
04
12-03-10 10:21:44
Standard configuration
TECHNICAL DATA:
Droplet size:
Working pressure:
Water consumption:
Pipe dimensions:
Pipe material:
Valve:
Nozzle:
Water tank:
05
12-03-10 10:21:55
Wilhelmsen Ships Equipment supplies high pressure CO-systems for the fire
protection of machinery spaces, pump rooms, cargo holds, paint stores and galley
exhaust ventilation ducts. The systems are designed according to the SOLAS
requirements and are type approved by the major classification societes. CO
will extinguish a fire by reducing the percentage of oxygen in the surroundings to
below what is needed to sustain combustion.
The Unitor CO systems are an environmentally friendly fire extinguishing
alternative as Wilhelmsen Ships Equipment supplies CO as a bi-product from
other industrial processes. If discharged, the CO will not do any damage to the
ship. However, CO is hazardous to humans as it is an asphyxiant and therefore
strict safety routines are required.
The Unitor High Pressure CO system is a central system. Several CO cylinders,
located in a separate room, are connected to a common manifold before the
main valves and the distribution piping. The cylinder valves and main valves are
normally pneumatically operated by means of CO gas from two smaller control
cylinders. Due to safety reasons, the system is manually released from a release
cabinet located outside the protected space. When opening the release cabinet,
microswitches will ensure the activation of CO warning alarms. After a defined
time delay, the piping and nozzle arrangement allows the CO gas to spread
rapidly to the protected areas.
06
12-03-10 10:22:02
Technical Data
Cylinders
Volume (ltr)
Weight of CO gas (kg)
Storage pressure@0C (bar)
Test pressure (bar)
Certificates
Standard
Release cabinet
Cylinders
Material of construction
Body
Stem and ball
Certificates
67,5 / 80
45 / 54
58,5
50
All major classes
ISO, EN DR US DOT
Degree of protection
Distribution valves
Sizes
Nominal pressure
DN0 to DN50
PN00 and PN60
Manifold
Size
Nominal pressure
Certificates
steel
stainless steel
all major class certificates or
according to specification
DN40 DN00
PN00 and PN60
all major class certificates or
according to specification
07
12-03-10 10:22:07
The Unitor Dry Chemical Powder system can be installed as a central system, a modular system or a combination hybrid system. The
system design and choice of materials adapted for the marine environment is the result of decades of experience in the supply of fire
fighting systems to newbuildings, incorporating the experience gained from servicing this type of system in operation. The system is
completely self-contained, and not dependent on any external power supply. All three versions comply with the "IMO Code for the
Construction and Equipment of Ships Carrying Liquefied Gases in Bulk".
A modular system with self-contained hose and monitor units, avoids the need for powder pipework and is offered in unit sizes from
60 kg up to 000 kg capacity each. Modular units can also be used for extra protection of such areas as car decks, helidecks and
cargo decks on chemical tankers.
A central system is the most common, giving the highest flexibility in use, as for example the whole amount of powder can be
discharged from one monitor or hose station. It consists of:
The powder central, containing - powder tanks, nitrogen cylinders and selector valves, located outside the cargo area, with a
capacity determined by the number of connected hose stations and monitors.
Monitors and hose stations located on the cargo deck to protect the manifold respectively at any point in the cargo area with at
least two hoses. The monitor is operated from an adjacent release cabinet or remotely from aft of the cargo area, while the hose
stations have an integrated release cabinet.
08
12-03-10 10:22:12
Technical Data
Tanks
Material
Capacity (kg)
Pressure class
Certification
steel
60500
PN6
as required by class
Cylinders
Material
Capacity (ltrs)
Pressure (bar)
Certification
steel
50
00
as required by class
Powder
Type
BC Jet
Monitor
Material
Capacity (kg/s)
Flange connection
stainless steel
above 0
DN50 and DN65
Pistol
Material
Capacity (kg/s)
stainless steel
,5
Cabinets
Material
Type of operation
09
12-03-10 10:22:17
General
System Description
Audio-visual alarms are provided to warn personnel of prior to release of foam. The system is designed with simple and quick
operation in order to fight fire at early stage, thus limiting damage, reducing heat and allowing fast evacuation.
0
12-03-10 10:22:22
Technical Data
Generators
Foam capacity
UFG-90 (m/min)
UFG-60 (m/min)
UFG-0 (m/min)
Material
Nom.working pressure
Expansion ratio
Connection flange
Mixing equipment
Type
Capacity (l/min)
Material
Tank
Type
Material
Opening
6
4
stainless steel
6 bar (@ generator)
:700
DN 0
balanced pressure proportioner
or inductor
75 to 0.000
stainless steel and bronze
Foam concentrate
Type
Viscosity (cSt) @ -C
Lowest working temp.
Storage temp.
Approval
synthetic
< 60
-C
-C to +45C
MED certified
Pump
Type
Material
Voltage/frequency (v/H)
Insulation and enclosure
centrifugal multi-stage
stainless steel
x 440/60 or on request
class F, IP55
cylindrical
glass fibre
reinforced polyester (GRP)
stainless steel on request
full size manhole for inspection
12-03-10 10:22:26
Description:
12-03-10 10:22:34
Technical Data
Monitor
Capacity (l/min)
Material
Max working pressure
50000
stainless steel
6 bar
Applicator
Capacity (l/min)
Material
Pressure (bar)
00 to 400
stainless steel
or 6
Foam concentrate
Types
Tank
Type
Material
Opening
Mixing equipment
Type
Capacity (l/min)
material
Pump
Type
Material
Voltage/frequency (V/Hz)
cylindrical
glass fibre
reinforced polyester (GRP)
stainless steel on request
full size manhole for inspection
12-03-10 10:22:38
Description:
The Unitor portable foam applicators are a supplement to the foam monitors and are supplied in accordance with specified requirements.
Sheltered areas not reachable by the foam monitors can be covered by a foam applicator. This gives increased flexibility.
Different applicators are available, covering varying needs for proportioning ratio, capacity and working pressure for particular vessel.
Typically, an applicator needs to be supplied with a fire hose and a foam concentrate container and is stored in a foam station on
deck or engine room.
Note
It is vital that the foam concentrate is suited to the cargo being carried.
Water is ineffective, since the burning liquid will float on it and be spread further.
Product features
The applicator is made of stainless steel. Its low weight makes it easy to operate and has attached a self-suction hose, so no additional proportioner is needed.
Wilhelmsen Ships Equipment offers a complete annual service program for the system, which meets all relevant requirements.
Compliance
Customer benefits
Material
tType of Applicator
50 740674
UFA-00-S
50 740654
UFA-00-S6
50 74066
UFA-400-S
50 740670
UFA-400-S6
Applicator
Stainless
Steel 6L
Stainless
Steel 6L
Stainless
Steel 6L
Stainless
Steel 6L
Hose and
suction pipe
Brass, Nickel
Plastic
Plated
Brass, Nickel
Plastic
Plated
Brass, Nickel
Plastic
Plated
Brass, Nickel
Plastic
Plated
Valve
Inlet size
BSP
Length
Hose meter
meter
,5
Capacity
At 6 bar
Proportioning
" female
Length
Nozzle mm
mm
700
00 l/min
%
" female
700
,5
00 l/min
6%
" female
700
,5
400 l/min
%
" female
700
,5
400 l/min
6%
Ordering information and technical data (MLR type Approved by RINA and RS):
Product
No.
tType of Applicator
50 60500
MLR-40 SA 5L/%
50 605048
MLR-40 SA 5L/6%
50 605055
MLR-40 SA 400L/%
50 60506
MLR-40 SA 5L/%
Material
Applicator
Stainless
Steel
Stainless
Steel
Stainless
Steel
Stainless
Steel
Inlet size
Length
Hose and
BSP
Nozzle mm
suction pipe
mm
Brass, Nickel
Plastic
/" female
680
Plated
Brass, Nickel
Plastic
/" female
680
Plated
Brass, Nickel
Plastic
/" female
680
Plated
Brass, Nickel
Plastic
/" female
680
Plated
Valve
Length
Hose meter
meter
,5
Capacity
At 6 bar
Proportioning
5 l/min
%
,5
5 l/min
6%
,5
5 l/min
%
,5
5 l/min
6%
Accessories
50 770
50 605
50 605
95 79455
86 67895
86 L78558
50 595777
50 965
4
12-03-10 10:22:45
Foam Concentrates
Description
Wilhelmsen Ships Equipment supplies a range of different types of foam concentrates for all kind of purposes with several approvals. Most foam concentrates are available from key ports.
In key ports Wilhelmsen Ships Equipment have foam concentrate specialists available. These specialists can be contacted through
our Customer Service Centres.
Customer benefits
Description
Regular protein foam %
Regular protein foam %
Regular protein foam 6%
Regular protein foam 6%
Fluorprotein foam %
Fluorprotein foam %
Fluorprotein foam 6%
Fluorprotein foam 6%
Type
UNIMIN P
UNIMIN P
UNIMIN P6
UNIMIN P
UNIROL %
UNIROL %
UNIROL 6%
UNIROL 6%
Packaging
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
Foam products for Polar solvent and Hydrocarbon fires, Fluorprotein base foam concentrate.
Product no.
50 764986
50 764988
50 764985
50 764987
Description
Universal Fluorprotein foam
Universal Fluorprotein foam
Universal Fluorprotein foam
Universal Fluorprotein foam
Type
UNIVEX SUPER -6%
UNIVEX SUPER -6%
UNIVEX SUPER -%
UNIVEX SUPER -%
Packaging
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
5
12-03-10 10:22:51
Foam Concentrates
Description
AFFF foam %
AFFF foam %
AFFF foam %
AFFF foam %
AFFF foam 6%
AFFF foam 6%
SYNTHETIC Foam Low,
medium & High expansion
SYNTHETIC Foam Low,
medium & High expansion
INSIDE AIR FOAM
INSIDE AIR FOAM
Type
UNIRAL %
UNIRAL %
UNIRAL %
UNIRAL %
UNIRAL 6%
UNIRAL 6%
Packaging
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
UNIREX
UNIREX
HIGH-FOAM %
HIGH-FOAM %
Foam products for Polar solvent and Hydrocarbon fires, SYNTHETIC base foam concentrate.
Product no.
50 5960
50 67698
50 67779
50 6770
Description
AFFF alcohol resistant foam
AFFF alcohol resistant foam
AFFF alcohol resistant foam
AFFF alcohol resistant foam
Type
UNIRAL AR -6%
UNIRAL AR -6%
UNIRAL AR -%
UNIRAL AR -%
Packaging
00 liter per drum
0 liter per can
00 liter per drum
0 liter per can
6
12-03-10 10:22:56
7
12-03-10 10:23:04
General
System Description
System Layout
The system consists of one 9 litres extinguisher with AFFF additive (CE certified). It must be installed near the protected risk.
A diffusion strip is fitted with one full jet nozzle for each risk area to be protected (stainless steel nozzle bracket and nozzles).
The maximum length of pipe work between the extinguisher and the last nozzle must not be more than 9 mtr.
A fuse chain equipped with thermal fuses ( per risk) installed in the top centre of the cooker hood triggers the system automatically.
The fuse chain is at the same height as the diffusion strip (.5 mtr to . mtr) and is installed above each risk area.
A manual control is installed near to the extinguisher or at a visible place for the galley crew.
The system is designed with detection features and automatic release. An alarm relay box can be provided for alarm and potential
free contact for shutting down galley equipment as well as providing external alarm and indication.
Installation
Easy and low cost installation with standard components
All components on the galley hood in stainless steel
All tubing and fittings of low pressure type
8
12-03-10 10:23:07
Technical Data
Extinguisher
Material
Colour
CO cartridge size (gram)
Capacity (ltrs)
Test pressure (bar)
Working pressure (bar)
Design standard
Weight (kg)
empty w/o trigger
full with trigger
Trigger
Material
Dimension (mm)
Weight (gram)
Fixing details
Switch
Nozzle
Material
Type
Flow rate @ bar
Fixing details
9
12-03-10 10:23:11
System Description
System Layout
System Application
0
12-03-10 10:23:17
Technical Data
Nozzle
Type
Mateial
Water cap. @ 4 bar (l/min)
Pump
Type
Material
Voltage/frequency (V/Hz)
full-jet
brass
9
centrifugal multistage
stainless steel
x400/50 and x440/60
(or on request)
Class F, IP55
12-03-10 10:23:21
MINERVA MX
System 800 FireDetectionHazardous Areas
Key Features
Fully intrinsically safe MXDigital addressable system 800 with Minerva MX
Fire Controllers
Allows flexible installation and system design
Detector circuit and sounder circuit monitoring maintained throughout
the system
Unrivaled range of I.S. field devices for MX Digital addressable applications
New model T000 is in compliaence with SOLAS and all of the major marine
classification societies.
The T000 is a fully Marine approved EN54 compliant to 8 loop detection panel. The T000 supports two MX DIGITAL detection loops and can be
expanded to 8 loops supporting up to 000 addressable devices.
Key Features
The panel has a strong cast aluminium front door, which incorporates a modular
user interface that fully complies with EN54 pt. Theuser interface incorporates
the ODM800 operator display module with a 6 x 40-character
backlit LCD
display, simple alphanumeric keypad, 5 soft keys and a fast
access key.
The OCM800 operator control module provides all mandatory
operator control keys and LED functions including Day/Night switching. Two control keys and
indication LEDs are provided for vessel specific functions. Control keys and LEDs are labelled in English according to the default
Marine functionality. The slide in decals can be reversed and
alternative text added.
12-03-10 10:23:24
0Hx440Wx5D
4 kg
050 VAC 50/60Hz
-0C to +70C
-8C to +55C
Up to 95 % RH Non-condensing
Down Grey (BS4800 0A-0)
EMC/RFI
Shock
Vibration
Loops
System Number
Batteries
EN 500-4
EN54-
EN54-
expanding to 8
000 addressable devices
x7AH
12-03-10 10:23:29
System Description
Complies with SOLAS Chapter - and the FSS Code Chapter0
Type approved by all major Classification Societies
Compact and modular design saves cost
Utilises existing CO pipework
Automatic air sampling and monitoring of up to 48 cargo holds
Repeater panels allow for monitoring from key locations on the vessel
Completely automated and self-adjusting
Explosion protected to IEC79 and EN 50 00
One button control for simple testing and resetting
Fans switch automatically every 4 hours to give even load on motors
4
12-03-10 10:23:34
Technical Data
Smoke Detection Panel
SDS-0
SDS-4
SDS-8
SDS-
Enclosure type
Repeater Panel
SDS-R48/G
SDS-48/P
Enclosure type
Extension Panel
SDS-E4
SDS-E8
SDS-E
SDS-E6
Enclosure type
Fan Unit
SDS-M0440
SDS-M044
Enclosure type
5
12-03-10 10:23:39
Description
The range consists of a series of universal tools designed to test, remove and replace
smoke, heat and CO detectors regardless of the system installed. The range is completely interchangeable each of the tools fitting on all of the poles within the range to
enable tests to be carried out quickly and accurately.
Products can be used safely and with ease even on detectors mounted up to 9 meters
high. All products are built to last many coming with a Lifetime Warranty and have
been designed with safety to the user and the fire detection system as paramount.
Product features
6
12-03-10 10:23:45
Ordering information
7408
74087
74070
740845
Cordless heat detector 46 test kit including battery batons and charger
74089
Telescopic pole 00, from .6 mtr to 4.5 mtr in 4 sections allow access to detectors up to 6 meter.
7505
757468
7
12-03-10 10:23:45
8
12-03-10 10:23:52
TECHNICAL DESCRIPTION:
To make up a complete Membrane Inert Gas System, compressed air normally has to be provided from dedicated air compressor(s).
The productivity of the membranes improves at increased pressure and a most effective membrane system will operate from
4 bar(g) air supply. The 4 bar air can be provided by normal industrial type oil lubricated screw compressors. By using compressors
with modulating control the pressure can be maintained constant, independent on the air flow requirement. This air will be saturated
with water and contaminated by traces of oil and particulates. A feed air treatment system is required to provide clean air free from
particles and oil. This clean air will allow for a high quality nitrogen product, free of contaminates, and will ensure long life for the
membrane system.
The air separation system consists of parallel sets of membrane modules. The Nitrogen leaves at essentially the same pressure as
the entering air. The oxygen-enriched flow is directed to permeate discharge at atmospheric pressure and is to be vented to a safe
area. Down stream of the membranes, a pressure control valve is to keep the membrane system at a pre-adjusted constant pressure.
This control valve is operated using the analogue signal from the oxygen analyzer(s) that will provide automatic oxygen control.
Depending on the application, the nitrogen can be delivered directly to the protected space or stored in a receiver tank. A high pressure booster compressor can be included to provide nitrogen at high pressures, such as for recharging of nitrogen cylinders.
Product development is a continuously ongoing project for our Technical Department. This will ensure an up-to-date system with
latest design & technology with Class approvals, for use in the rough and demanding maritime environments. Wilhelmsen Ships
Equipment offers consultative services, engineering, drawing & documentation and commissioning on fixed installation.
Wilhelmsen Ships Equipment has a global service network which can offer regular interval service agreements. In case for any urgent
needs, the Nitrogen systems service personnel is available at the following locations:
Netherlands/ Rotterdam
Norway/ Alesund
Poland/Szczecin
Korea/ Busan
USA/ Houston
China/ Shanghai
Other locations/ flying squad
Flying squad staff is available based on short notice.
Option:
EX Proof equipment
Block & Bleed arrangement
Dual purity lines
Air by-pass function
Integrated Marine System (IMS) - N generator and feed air
compressors installed on the common frame, including interconnecting wiring and piping.
9
12-03-10 10:23:52
TECHNICAL DATA:
NITROGEN SPECIFICATION:
Purity range:
Capacity:
Dew point:
Gas composition (on dry basis):
Discharge pressure:
Recovery:
Purity control:
Discharge temp.:
Oil content in product:
Particulars in product:
95-99.9% N
0-4500 Nm Non limited capacity (4500 Nm/h already delivered as the biggest system)
up to -70 C (after expansion to atmospheric pressure)
Nitrogen (N) + Argon (Ar) balance
0- barg
> 5 % at 95 vol% N.
Back pressure control valve, pneumatically controlled by PLC/ IP-converter
up to 50 C
< 0. ppm
< 0.0micron
UTILITIES:
Ambient conditions:
Feed air pressure:
Feed air temperature:
Power consumption:
COMPRESSORS:
Type:
Flow control method:
Pressure:
Cooling medium:
Starting method:
0
12-03-10 10:23:54
12-03-10 10:24:16
Spares Centres
Spares Centres
Centres in Houston, Rotterdam, Yokohama, Piraeus and Singapore
provide global coverage
Contact your Customer Services
Global agreements with key suppliers
Marine technical expertise always available
Competitive quotations
Fast and efficient service
Direct to your vessel or ships agent
Spares for Wilhelmsen Ships Service equipment and installations plus major
manufacturers
A wide range of standard safety products and spare parts available
FIRE
CO HP Systems
CO LP Systems
Foam Systems
Halon Systems
Dry Powder Systems
LAFF Systems
Detection Systems
Portable Fire Exting.
Hydrants, hoses & Coupl.
RESCUE
Liferafts
Immersion Suits
Lifejackets & Buoys
Rescue Equipment
SAFETY
Breathing Air Apparatus
Escape Sets
Oxygen Resuscitators
Breathing Air Compressors
Fire Protective Suits
Gas Suits
Chemical Suits
IMO Signs
12-03-10 10:24:26
Service
Fire extinguishers
Fire hoses, couplings and nozzles
Personal protection equipment
Rescue equipment
Medical
Oil spill equipment
Systems
Service
12-03-10 10:24:30
Good service
Qualified technicians?
The right equipment?
Reliable routines?
Efficient organisation?
Consistency around the world?
Predictability?
Marine specialists?
These are the principles that underlie all our services, in Fire-fighting-, Rescue-,
Safety-, Environmental- and Refrigerant retrofit service.
Our qualified, experienced technicians get things right first time, saving you time and
money, and giving you peace of mind. They are regularly trained and certified to ISO approved international standards. Best of all, we
keep a record of all the due dates for services and regulation updates.
We will keep you informed, with plenty of notice, when your equipment needs to be inspected or overhauled.
In Full Compliance
Do you often find it time consuming and difficult to be able to meet all rules and regulations related to Safety?
Do you feel that sometimes you would like to have better control of quality and cost of inspections on your Safety equipment and
systems? Do you sometimes have the unpleasant doubt about how the equipment will work in case of an emergency?
Would you like to have peace of mind?
If you answer yes to any of these questions, Wilhelmsen Ships Service is in a position to assist you.
FIRE
RESCUE
Liferafts
Rescue boats
Immersion suits
Rescue equipment
Resuscitators
Medical oxygen systems
PERSONAL PROTECTION
NITROGEN
ENVIRONMENTAL
SYSTEM INSPECTION
14
12-03-10 12:29:26
As the first global marine safety service provider, the Wilhelmsen Ships Service safety service organisation is certified
to ISO 900:000 requirements. As part of our approval programs all our service stations hold the required approvals to service you
systems and equipment onboard your ships. All our service stations are in addition Z7 approved by the major classification societies
as approved service provider.
How can you keep your vessels ready for emergencies?
Well maintained, emergency-ready fire suppressant systems?
Ready-for-action fire rescue equipment?
Trustworthy personal protection?
Compliance with safety rules?
Wilhelmsen Ships Service not only supplies, but services all these products to give you the assurance of complete peace of mind.
We will keep you informed, with sufficient notice, when your systems need to be inspected or overhauled.
We ensure that your equipment works when you need it.
What else do we provide?
We replace all faulty parts and condemned products.
We issue safety certificates and reports, and monitor your service due dates.
We update fire and safety plans according to current flag and class rules.
We arrange onboard training on maintenance and operation of fire and safety systems.
Our consultancy services do extended surveys with the aim of improving systems or bringing them up to the latest standards.
Flexibility
We can offer just one service on one vessel, or a comprehensive fleet agreement for all your vessels.
5
12-03-10 10:24:58
Service stations
Argentina
Australia
Bahrain
Belgium
Brazil
Canada
China
Cyprus
Denmark
Finland
France
Germany
Greece
Italy
Japan
Korea
Latvia
Malaysia
Malta
Mexico
Netherlands
New Zealand
Norway
Panama
Philippines
Poland
Portugal
Puerto
Russia
Singapore
South Africa
Spain
Sweden
Taiwan
Thailand
Trinidad
Turkey
UK
UAE
USA
Buenos Aires
Fremantle, Melbourne, Sidney
Manama
Antwerp
Rio de Janeiro, Santos
Quebec, PQ, St. John, NB, Halifax, NS, Montreal, PQ, Vancouver, BC
Shanghai, Dalian, Guangzhou, Hong Kong
Limassol
Esbjerg
Helsinki
Le Havre, Marseille, Nantes
Hamburg
Piraeus
Bari, Genoa, Ravenna, Livorno, Trieste, Venice
Kobe, Yokohama, Moji
Busan
Riga
Kuala Lumpur,
Bintulu
Valetta
Vera Cruz
Rotterdam
Auckland
Bergen, Oslo,
Stavanger, lesund,
Troms
Cristobal
Manila
Gdansk, Szczecin
Lisbon
Rico San Juan
St. Petersburg
Singapore
Cape Town, Durban
Barcelona, Bilbao, La Coruna, Valencia, Algeciras, Las Palmas
Gothenburg
Kaohsiung
Bangkok
Port of Spain
Istanbul
Liverpool, London, Southampton
Dubai, Fujairah
Charleston - SC, Corpus Cristi - TX, Houston - TX, Los Angeles - CA,
Miami - FL, New Orleans - LA, New York - NY, Portland - OR, San Fransisco - CA, Savannah - GA, Seattle - WA,
These service stations will in most cases also cover the nearby ports
Flying squads
For ports not covered by the above list, Wilhelmsen Ships Service can provide flying squads. Please contact you regular Wilhelmsen
Ships Service contact person or see the customer services contact section at the end of this catalogue and we will be able to assist
you.
Riding crews
Sometimes a riding crew sailing with the ship is the most efficient and maybe only solution to carry out the required inspections.
The crew will board the ship at agreed port, and with their tools, test equipment and spare parts they are able to carry out most
inspections on board.
6
12-03-10 10:25:00
If you sign up for a fleet agreement we will use our service management system to update all work, as it happens. We will appoint a
dedicated representative in one of our Customer Competence Centres with responsibility for all your safety equipment, inspection &
maintenance schedules and due dates.
We can offer a much more efficient service when we can help a fleet manager plan ahead. You get prices and service dates you can
rely on, and you save time and money by consolidating several technical services in one visit.
Wilhelmsen Ships Service already handles hundreds of vessels on Safety Service Fleet Agreements.
Safety service agreement options you choose!
Periodic inspections according to flag/class/IMO MSC 850
Fixed annual inspection price per ship
Due date follow-up
Update fire and safety plans
Dedicated coordinator for your vessels
Crew training to IMO MSC 850
Replacement of scrapped equipment
Pressure testing and refill according to flag/class
Upgrade of systems and equipment
Consultancy services
Liferaft rental
Access to Service Management System
No delays, no surprises
How can you keep your lifesaving equipment operational and certified?
We supply and service liferafts, immersion suits and life vests.
Liferaft rental
This is the best long-term solution to keep your liferafts safe and compliant.
There is no need to worry about yearly service schedules - we inform you
when your liferafts are due for annual service, and you exchange them at an
agreed port in any of our liferaft exchange centres around the world.
In partnership with the Survitec Group (manufacturers of RFD, Beaufort, DSB,
Crewsaver, EV and Elliot) we produce our own Unitor branded liferaft, which
forms the basis of our rental offer.
We supply you with newly-certified rental liferafts, at predictable prices, in a
fraction of the time it normally takes to service existing liferafts.
17
12-03-10 12:29:32
CO2 systems
Wilhelmsen Ships Service carries out both full inspections of the entire system and verification of the contents, in accordance with
IMO Circ. 1318.
Due to the physical nature of CO, the CO goes from liquid to gaseous phase at approx 7 degrees C. That means that if cylinder
temperature is higher than that, manual weighing is required to get a proper verification of the contents. If you use a refrigeration unit
to cool down the cylinders before an inspection, make sure that the cylinder temperature reaches below the mentioned limit. Other
service companies claiming that using a Liquid Level Indicator will work in hot climates might approach you. But remember that the
physical nature of CO prohibits the use of a Liquid Level Indicator if cylinder temperature is above 7 degrees. There are simply no
level to measure.
Wilhelmsen Ships Service is regarded as one of the very few companies capable of doing a proper service on CO low-pressure
systems. To avoid icing problems like improper readings, blockage or restricted release possibilities, Wilhelmsen Ships Service sets
the highest requirements to the CO gas and the refilling procedures. Therefore Wilhelmsen Ships Service always measures the dew
point in the tank(s) and the gas itself prior to filling. This to ensure trouble-free operation in the future.
Foam concentrate needs to be tested at regular intervals. IMO has established a standard for testing of foam concentrate for
marine use. Wilhelmsen Ships Service is following the required standard explained in IMO Circ. 1312. When you need your foam
concentrate tested, make sure you get it tested to the correct standard.
Foam concentrate is a complicated substance and can be destroyed easily if not Handled properly. If you are in doubt, our Foam
Specialists are standing by to assist you. Simply call your nearest Customer Services and ask for the Foam Specialist.
8
12-03-10 10:25:13
Nitrogen systems
Wilhelmsen Ships Service in cooperation with sister division Wilhelmsen Ships Equipment provide full range of spare parts, system's
inspections, repairs and calibrations of key components to ensure safe cargo tanks operations/inspections at any time.
Highly qualified automation Service
Engineers are available to make repair
job starting from simple maintenance,
going through troubleshooting program
and ending with very complicated system
calibration including PLC software
verifications/modification if required. Once
the capacity of Inert Gas System is critical
for discharge cargo operation we serve full
run test to verify parameters if they still
meet initial specification (total discharge
rate). Considering urgency of the matter for
the ship during cargo operation at port the
service is provided on short notice.
How to Order
Wilhelmsen Ships Service is only a phone call away. If the system or product has been inspected by us before, we have the needed
data to process your order quickly and efficient.
If this is the first time this system or product is to be inspected by Wilhelmsen Ships Service, we would appreciate some basic technical
information.
Type of system
Roughly size of system
Manufacturer if possible
Type of service needed i.e. full inspection or contents check only
This will enable us to plan for the job properly to make sure that the inspection can be carried out in an efficient manner.
Please contact our Customer Services for further information. Contact details to be found on the next page.
9
12-03-10 10:25:19
Contact Information
Contact Information
For more information, please contact the following customer service centres:
ASIA PASIFIC
AMERICAS
EASTERN EUROPE
RUSSIAN FEDERATION
BALTICS
EASTERN MEDITERRANEAN
40
12-03-10 10:25:20
Contact Information
Contact Information
EUROPE
4
12-03-10 10:25:20
Safety Catalogue
ID no. 806208, Printer: AIT Otta, 03.10, 10K, Country of Origin NO.
Safety Catalogue
Products, equipment and services
16.03.10 11.25