Goro
Taper Tap
‘The Gotco Taper Tap is an internal catch fishing tool designed to
retrieve tubular members from the well bore. It is the most eco-
‘nomical tool of its kind for freeing fish.
Gotco Taper Taps.
Nominal Sze TWA Tee SR
Outside Diam, a a
ToCatch TRI HPAI Pipe Ta AID
‘otal Length ee
‘Smalls: Wicker Da ee
Wicker Dia. We te
TH 1S
wyDTs
Teillongh 2 a
Smale WckorDia
Largest Wicker Dia. Vie
Gotoo Part No. Te en
Gotco Taper
Nonioa'See——7hiF Seg SAL SRIF Sh Read OS
Outside Diam. th Mk whe fe 5
Tocach —-2hPpe aiReg—ghPoe aI Wie
APWYOT TU APLFNTY 3inPpe 0ST
Toaltegh a 2
Siales WekerDia 1 Ts
LargostWcterDia. 2 ah Fhe
Gotco Part No. T™1 THe THs TS.
Gotco Taper Taps
ie AFH WhReg We FH nF
Ostiée Dan Sie oh Th
SAT WhiRog AFT MATT Wh
NW thFpe SiPo0
‘Total Length 36 % % s
Smalest WekerDa 2m Vee
Larges WickerOa. ie Sha a
Tr eT
Gotco Taper Taps
‘SieReg — SFH SikIF ——isReg
7 hh
To Catch ‘Shor ‘Sikor Sihor — GieReg Ge IF
SHaagT SiaFHTY Sia TW Poe
wing 2
Sales Wear ik 3
inrgesWckerDa. 45h th
Goto Pano. Tat 1¥22 Ta
Construction
The Taper Tap is manufac-
tured from high grade alloy and
specially heat treated. The basic
Taper Tap is a single piece con-
struction, The hardened cutting
teeth (wickers) are carbo-nitrided
and machined on a shallow taper
(approximately inch per foot) 10
provide an excellent grip for light
duty pick-up jobs. Plain water-
tight wickers are furnished as
standard equipment. Fluted wick-
crs are also available on request
Taper Taps are furnished either
plain or threaded for kins
Assembly and Operation
Assemble the Taper Tap to
the bottom of the fishing string
Run in the hole until reaching the
fish. Apply minimum weight
(less than one point) and rotate
sufficiently to allow the wicker
threads to be embedded into the
interior surface of the fish. (Be
careful not t0 apply excessive
weight or to rotate excessively
This could cause damage to the
wickers.) Once the fish has been
securely engaged, it can be lifted
from the hole.
Optional Components
Skirt — The skirt is used
when the Taper Tap has been
threaded fora skirt. The skirt is
assembled to the Taper Tap and
will assist in guiding the fish for
proper engagement and retrieval
Several types of skirts can be
‘ordered; plain end, lipped end, or
threaded end with a thread protec-
tor for adding standard oversized
side,
Guides — A guide can be
assembled to the bottom of a
threaded skirt. When the hole size
is considerably larger than the
diameter ofthe fish, there may be
How to Order Gotco Taper Taps
‘When ordering, please specify:
+ Name and part number of assembly + Fluted wickers, frequired
+ LD. offish tobe retrieved + OD, ifonstandard
+ Top connection required + Left-hand threads or wickers, if required
- Internal Catch
‘Skirted Taper Tap
sufficient room forthe Taper Tap to
pass along side ofthe fish without
engaging it. In this case, an over
sized guide can be used to engage
the fish securely and to properly
guide it onto the Taper Tap.
Standard Taper Taps are sup-
plied with right-hand threads,
Left-hand threads are available on
request at no extra charge.