Professional Documents
Culture Documents
Pre-test
Select the appropriate answer for each
question. (MCQs)
1. Which of the following is a derived
SI unit
a. Kelvin
b. Ampere
c. Metre
d. Joule
2. Resistance: Ohm as
_______:________
a. Inductance: Farad
b. Capacitance: Henry
c. Pressure: Pascal
d. Power: Joule
3. The unit of magnetic flux is weber
a. True
b. False
4. 1 milli ampere is equal to ______
a. 1000 A
b. 0.001 A
c. 0.000001 A
d. 1000000 A
5. The movement of _______ results
in current flow
a. neutrons
b. electrons
c. protons
d. ions
6. 1 micro volt is
a. 0.001 V
b. 0.0001 V
c. 0.00001 V
d. 0.000001 V
7. ____________ is a semiconductor
a. Neon
b. Silicon
c. Lithium
d. Copper
Electrical/Electronic Eng.
Training
Pre-test
13. Power factor will be leading for
a. Inductive load
b. Capacitive load
c. Resistance Load
d. Any of the above
14. The frequency of the supply
voltage in Ghana is 50 Hz. The
time period ( T ) is
a. 0.02 s
b. 50 s
c. 1 s
d. 10 s
15. Fuses are rated in ________
a. ampere
b. ampere - hour
c. watt
d. kilowatt -hour
16. The energy stored in a lead-acid
battery is in the form of
a. Chemical energy
b. Electrical energy
c. Potential energy
d. Solar energy
17. Doped(impure) semiconductor is
also called________
a. Intrinsic semiconductor
b. Extrinsic semiconductor
c. Active semiconductor
d. Any of the above
18. The emerging of a free electron and
a hole is known as_____
a. Recombination
b. Absorption
c. Adsorption
d. Attraction
19. In electronics the term IC denotes:
a. Internal Combustion
b. Industrial Control
c. Internal Circuit
d. Integrated Circuit
Electrical/Electronic Eng.
20. The unit for electrical energy is
a. Kilo-Watt- Hour (KWH)
b. Watt (W)
c. Farad (F)
d. Volts (V)
21. Which equation for power is
incorrect
a. P VI
b. P I 2 R
V
c. P 2
I
V2
R
22. A material whose resistance
decreases with an increase in
temperature is said to have_
a. negative temperature
coefficient of resistance
b. positive temperature coefficient
of resistance
c. low temperature coefficient of
resistance
d. high temperature coefficient of
resistance
23. ________ stores energy in its
magnetic field.
a. Battery
b. Inductor
c. Capacitor
d. Transistor
24. The _______ value of an
alternating current or voltage is one
which has the same heating effect
value as that of the direct current or
voltage.
a. Peak
b. Average
c. Frequency
d. RMS
d. P
Training
Pre-test
Electrical/Electronic Eng.
Apparent power
True(active) power
c. Apparent power True(active)
power
d. Apparent power True(active)
power
b.
Training
Pre-test
37. The principle of operation of a
transformer is based on
a. Static induction
b. Self-induction
c. Mutual induction
d. Dynamic induction
38. In a transformer, power is
transferred from the primary side to
the secondary side __
a. Magnetically
b. Electrically
c. Physically
d. None of the above answers is
correct
39. Fuses are provide in the Direct-OnLine Stater to
a. Limit the supply voltage
b. Limit the current
c. Reduce the starting current
d. Provide short circuit protection
40. _________converts DC to AC
a. Inverter
b. Rectifier
c. Voltage regulator
d. UPS
41. The zener diode is used as
a. a rectifier
b. an amplifier
c. a voltage regulator
d. an insulator
42. A pn junction diode is a_______
terminal device.
a. Two
b. Three
c. Four
d. One
Electrical/Electronic Eng.
43. The Bipolar Junction Transistor
(BJT) is a three-terminal device.
The terminals are:
a. Emitter, Drain and Gate
b. Emitter, Drain and Base
c. Emitter, Collector and Gate
d. Emitter, Collector and Base
44. The BJT is a_________
operated/controlled device.
a. current
b. voltage
c. current and voltage
d. none of the above
45. Silicon Controlled Rectifier (SCR)
is a three-terminal device. The
terminals are:
a. Anode, Cathode and Drain.
b. Anode, Cathode and Gate.
c. Gate, Source and Drain.
d. Gate, Collector and Emitter.
46. A diode can conduct in only one
direction
a. True
b. False
47. For an OR gate the output is high
(1)if any or all of the inputs are
high(1)
a. True
b. False
48. For AND gate the output is low(0)
if any or all inputs are low(0)
a. True
b. false
49. If any of the inputs to a NOR gate
is low (0), the output is low (0)
a. True
b. False
50. If all inputs to an Exclusive OR
gate (XOR) is high the output is
low (0)
a. True
b. False