Professional Documents
Culture Documents
Training Content
Introduction to CiTrans R865/R845 and OTN
Device
Networking and Planning
CEN Service Configuration
CEN Fault Isolation
Introduction to CiTRANS
R865/R845 and OTN Device
Contents
Device Overview
CiTRANS R865 and Cards
CiTRANS R845 and Cards
FONST 3000 / OTN Cards
Device Overview
Access layer
Distribution layer
Core layer
Device Overview
The CiTRANS R865 and CiTRANS R860 are high-end routers offered by
FiberHome. They are mainly used at the backbone layer of the IP bearer
network, edge of the IP backbone network, core and distribution layers of the
MAN, distribution layer of the backbone network, as well as the core and
convergence networks in different industries and enterprises.
The CiTRANS R845 is a high-end IP/MPLS router offered by FiberHome. It is
mainly used at the access and distribution layers of the mobile backhaul network
and multi-service MAN.
The CiTRANS R800 series devices provide line rate forwarding through highspeed interfaces, sound QoS mechanism, carrier-class reliability, abundant
service processing capabilities, flexible service configuration and management,
as well as packet-based time synchronization technology, which meet
requirements of data services and CEN services for network devices.
6
Device Overview
Supports BFD for static routes, BFD for VRRP, BFD for OSPF, BFD for ISIS, BFD for
BGP, BFD for LSP, and BFD for PW.
Supports MPLS OAM Y.1711.
Supports MPLS L2/L3 VPN.
Supports QoS functions, including traffic classification, traffic marking, traffic policing,
traffic shaping, congestion management, queue scheduling, and connection
admission.
Supports the LDP and RSVP-TE signaling protocols.
Supports the PIM-DM multicast protocol and IP source-specific multicast (SSM).
Supports ECMP.
Supports OAM at the link layer, LSP layer, PW layer, and Ethernet service layer, and
provides fault management and performance management functions.
Supports the end-to-end path and service configuration (in manual, automatic, or
semi-automatic mode).
Supports dual-homing protection for the GE interface and cSTM-1 interface.
7
Device Overview
Supports LAG protection for Ethernet access links.
Supports the multi-segment PW (MS-PW) function.
Supports LSP 1:1 protection.
Supports IP FRR, VPN FRR, and MPLS TE FRR.
Supports VRRP.
Supports hardware redundancy protection for key components such as
the switching card, clock card, core switch card, and power supply.
Reports power consumption of the routing control card and switching
clock card.
Reports the rotation speed and temperature of fans.
Supports AC power supply.
Management
plane
Control plane
Management
channel
Signaling
channel
Inter-card
communication
Data plane
Protection
QoS
OAM
Clock
Service board
Data plane
Data plane
Protection
OAM
QoS
Clock
OAM
Clock
Service board
SCU
Management
plane
Control plane
Forwarding
plane
Legend
Protection
Management channel
Signaling channel
Clock
Data channel
10
Network protocol
software
OS and
Inter-board
driver communication
RCU
application
Synchronization channel
between active and standby
devices
Network protocol
software
Inter-board
OS and
communication driver
Signaling channel
Management channel
Backplane
BMU
BMU
BMU
BMU
Core
switching
Core
switching
Service
board 1
GE or
xGE
Service
board n
GE or
xGE
11
Fan unit
CiTRANS R865
12
Function Advantages
Adopts the distributed hardware-based forwarding and nonblocking switching technologies.
Supports carrier-class reliability, line rate forwarding
performance, sound QoS mechanism, abundant multiservice processing capability, and excellent extension
capability.
Provides the powerful IP service processing capability as
backbone convergence routers.
Integrates L2 Ethernet switching capability, supports
abundant IP service features of edge nodes including the
Ethernet switching and processing, tunneling, and flow
queuing, which ensure a smooth IPv4-IPv6 evolution.
13
Card Type
Card Density
Access
Capacity
cSTM-1
4, 8 channels/card
32
FE
8 channels/card
120
GE
8, 16 channels/card
240
10GE
2, 4 channels/card
60
40GE
1 channel/card
12
Type
Card Name
Card Type
RCUO1
Cross-connect clock
processing unit
SCUO1
Power card
PWR
Power card
XSO3
15
XGO2
15
XSO2
15
GSO2
15
ESO3
15
GSO1
15
GSO3
15
QSO2
12
ESO1
12
ESO2
12
S1O1
S1O2
E1O1
Service card
14
P
O
W
E
R
1A 1B 1C 1D 1E 1F
P
O
W
E
R
8/ 8/ 0A 0B 0C 0D 0E 0F
18 19
15
Equipment Hardware
SFP/XFP Working Range
GE
Tx (dBm)
Rx (dBm)
10GE
Tx (dBm)
Rx (dBm)
0.5 km (1310nm)
-9.5 to 0
-17 to 0
10 km (1310nm)
-6 to -1
-14 to -1
10 km (1310nm)
-8 to -3
-20 to -3
40 km (1550nm)
-1 to 2
-17 to -1
40 km (1550 nm)
-2 to -3
-23 to -3
80 km (1550nm)
0 to 4
-24 to -7
Performance Name
Performance Meaning
Recommended Value
TEMP
EMU Temperature
10 to 50
POWER
FAN_HTEMP
LASER_TEMP
16
-41 V to -56 V
10 to 50
0 to 40
CiTRANS R845
17
Equipment Hardware
The CiTRANS R845 adopts a 19-inch/5U structure, with the dimensions of 443
mm (W) x 220 mm (H) x 245 mm (D).
It provides eight slots for service cards, two slots for routing control cards, and two
slots for switching clock cards.
Its switching capacity is 80 Gbit/s and the maximum bandwidth for a slot is 20
Gbit/s. It supports FE, GE, 10GE, E1, and STM-1 interfaces.
18
Card Description
The CiTRANS R845 is composed of the routing control cards, crossconnect clock cards, various types of interface cards, and power cards.
RCUP1 (standby)
RCUP1 (active)
Fan unit
SCUP1 (standby)
SCUP1 (active)
19
Card Description
Configuration of public cards
Card
Switching
card
Control
card
Power
card
Applicable Slot
Card
Name
SCUP1
Function Description
R845
Slots 5 and 6
R835E
R830E
Slots 3 and 4
Slot 2
RCUP1
Slots 0 and 1
Slots 0 and 1
Slot 0
PWRP1
Slots 12 and 13
Slots 8 and 9
20
Slot 5
Provides a 48 V DC power
supply.
Equipment Hardware
Configuration of service units
Card Type
Card Name
Applicable Slot
Remaks
XSK2
XSK3
MSP1
ESK3
SLOT 8-12
ESK4
Slots 8 and 9
S1K3
Slots 8-10
2M electrical interface
card (32 channels)
E1K4
Slots 8 and 9
2M electrical interface
card (16 channels)
E1K5
Slots 8 and 9
21
22
Equipment Hardware
The FONST 3000 is an OTN-based intelligent multiservice wavelength division product. The FONST
3000 supports multi-service, large-capacity and
transparent transmission network applications.
23
24
Card configuration
Optical Transponder Card
OTU2S: The OTU2S card receives one optical signal (STM-64 / 10GE LAN /
10GE WAN /10GFC / OTU2) from the client side, performs the O / E
conversion and aggregates into one OTU2 / OTU2e / OTU2f signal of
DWDM standard compliant wavelength; outputs the converted signal via
the wavelength division side optical interface to the optical multiplexer card
or the optical add / drop multiplexing card for WDM.
THANK YOU
26