ASSOCIATION OF CONSULTING ENGINEERS MALAYSIA !/ 3/22" ik
qkar veka kersekutu
GUIDELINES
TO DESIGN OF
BLOCKWORK MASONRY
FIRST EDITION 1988\
ACKNOWLEDGEMENTS
‘The Association of Consulting Engineers Malaysia (ACEM) gratefully acknowledges
permission granted by the British Standards Institution for the reproduction of data based
fon tables.2(b), 2(c) and 3 from BS 5628 : Part 1: 1978 (1985).
GUIDELINES DRAFTING SUB-COMMITTEE
1. Professor V. Navaratnarajah, B. Sc.Eng (Hons), M.EngSe. Ph.D., M.LC.E,, CEng.,
MLEM, P-Eng,
2. In. Tang Kam Kok, BE, FLLCE,, F.LStruet.E, C.Eng, F.LE.M., P.Eng, MACEM.
3. Jr, R. Thangaratnam, A.MN,, P.P.N., M.LStruc.E., C.Eng, M.LE.M,, P.Eng.
4, Ir, Ng Kok Peng, B.E(Hons),, MLCE., CEng, MLEM,, P-Eng.
5. Mr, Wong Chong Leong, B.Eng.(S’pore)
Compliance with this guidelines does not of itself confer immunity from legal obligations.
ACEM 1988akar reka bersekutu
CONTENTS
Foreword
Preface
GENERAL
Symbols
SECTION A: DESIGN PRINCIPLES
Introduction
Materials and Specifications
Design Concepts
Design of Non-Reinforced Walls and Columns
Application to Housing Construction
References
SECTION B: DESIGN EXAMPLES
SECTION C; RECOMMENDED DETAILS
SECTION D; SAMPLE SPECIFICATIONS
SECTION E: TYPICAL LAYOUTS OF HOUSING PLANS.
(iii)
Page
vii
SReunn
20
43
66
n