Professional Documents
Culture Documents
Basic Tutorial: Reinforced Concrete Structure
Basic Tutorial: Reinforced Concrete Structure
midas
DrawingShop
- 1 -
Index
Ch.1 Summary of Design
1. Summary of Building Model
2. Standards of Structural Design
3. Structural Materials
4. Ground Conditions
5. Plans and Cross Sections
6. Section Properties
- 2 -
3. Structural Drawing
17. Settings
18. Setting Plan Style
19. Setting Section Style
20. Setting Member List Style
21. Setting General Notes Style
22. Output Option
23. Generate Auto Drawing
- 3 -
- 4 -
Summary of Design
Item
Remarks
Building
Location
Use
Office
Scale
Structural
System
Materials of Structure
Material
Floor
Concrete
All floors
Reinforcement
All floors
Type
Normal
concrete
Fe415
Fe250
Ground Conditions
1. Basic foundation: Spread footing
- 5 -
Standard
Intense(N/mm )
M25
25
IS
IS
415
250
Remarks
Summary of Design
C1
Y1
WX 1
G1
C1
B1
G1
WX 1
G1
C1
G1
6500
B1
G1
B1
C1
G1
C1
G1
C1
G1
G1
B1
G1
WX 1
4500
C1
G1
C1
G1
G1
B1
4500
G1
WX 1
Y3
Y2
C1
9000
C1
G1
G1
C1
B1
nd
C1
G1
7000
7000
20500
X1
X2
X3
X4
nd
2 floor Plan
5.2 Column and wall layout (Cross Section of Columns on each floor)
1500
C1
C1
C1
WX 1
G1
B1
C1
G1
C1
G1
C1
C1
G1
WX 1
G1
450
450
C1
G1
450
Y1
B1
450
G1
G1
B1
G1
450
1500
C1
G1
1500
B1
WX 1
G1
450
300
B1
G1
B1
WX 1
G1
300
G1
9000
4500
G1
450
1500
4500
Y3
C1
G1
300
C1
Y2
C1
G1
6500
7000
7000
20500
X1
X2
X3
X4
- 6 -
Summary of Design
5.3 Cross Section
G1
G1
3,200
Roof
3,200
6F
3,200
5F
3,200
20,200
4F
3,200
3F
4,200
2F
C1
C1
C1
1F
4,500
4,500
9,000
Y2
Y1
Y3
Section Property
(Table 1) Column, Beam
Storey
Column
Beam
Remarks
Roof
Group
-
Size(mm)
-
Group
G1
Size(mm)
450x650
6F
C1
400x400
G1
450x650
4~5F
C1
700x700
G1
450x650
2~3F
C1
700x700
G1
450x700
1F
C1
750x750
G1
700x1800
Storey
Thickness(mm)
Wall
All
180
Spread Footing
1F
700
- 7 -
Remarks
Create Models
2. ModelMenu
3. Struct. DWGMenu
- 8 -
Create Models
1. New Project
Export Design Results of midas Gen
After you complete the analysis and design in midas Gen, save the analysis/design results
in a neutral file ( [fn.mgn] in this case).
1. Open BasicTut(RC)_Italy.mgb file. The file is saved in Samples\Basic Tutorial
folder of the program installed folder (ex. c:\Program Files\Midas\DrawingShop).
2. Click
- 9 -
Create Models
- 10 -
on your
Create Models
- 11 -
Create Models
1. ClickFile>Import>midas Gen.
2. Click button
- 12 -
Create Models
By Members
Import design results of midas Gen by members. It is possible to rearrange the
placement of reinforcement considering constructability by using the required
rebar area for each member calculated in Gen.
By Sections
Assign the most conservative results to all members which have the same
section IDs. If you give section numbers considering member grouping in
midas Gen, then check on By sections. In this case, the name of group is
determined from the section name you defined in midas Gen. You can also
rearrange the placement of reinforcement considering constructability.
- 13 -
Create Models
1. Click View>3D Dynamic View and confirm the shape by rotating the
structure.
- 14 -
Create Models
1.
2.
3.
- 15 -
Create Models
2. Create Models
Define Reinforcement Guidelines
Define the standard values in Concrete Reinforcement Guideline, Wall Structure
Reinforcement Guideline Wall, Steel Structure Junction Part Draw Guideline,
Steel Skeleton Reinforcement Concrete Arrangement Guideline for reinforcement
arrangement or for creating plans. (Refer to Rules of Making Drawings)
A warning message will appear if any of the guidelines are not followed when you edit any
information of arrangement.
1.
2.
3.
Click
- 16 -
Create Models
- 17 -
Create Models
Create Gridlines
Auto-generate gridlines by using the design information from midas Gen, and edit the
Dimension and Gridline names.
1.
2.
Click
lines.
3.
4.
Click
- 18 -
Create Models
1.
Sectional View
You can easily change
the eccentricity of column
and wall by using this
panel.
2.
3. Check the model on the screen using the wheel button of mouse (zoom in/out, pan).
Plan View or
- 19 -
Create Models
Auto-Placement of Reinforcement
Re-arrange reinforcement bars for beams considering constructability according to the
guidelines defined inDefine Design Code
Re-arrange reinforcement bars and calculate the amount of reinforcement required
ignoring the diameter, number and spacing designed in midas Gen.
Dont execute this command if you want to use the diameter, number and spacing of
reinforcement equally.
- 20 -
Create Models
1. To edit bar arrangement for individual members, double click each member.
(You can modify the bar arrangement as required. A Warning Dialogue will appear if
any rules of bar arrangement are not followed.)
Apply to Member when you want to apply the modified details only to
2. Click
a specific member. If you want to use the same details for all members in the group
then click
3. Click
Apply to Group.
after modifying all the information for bar arrangement.
- 21 -
Create Models
Method 2: Editing bar arrangements in Table is as shown below.
1. Execute Model>Beam>Change Rebars on Table.
(You can modify the bar arrangement as required. A Warning Dialogue will appear
if any rules of bar arrangement are not followed.)
2. It is possible to select members individually
Otherwise, you can also select multiple members in the same column at one time by
selecting members while holding CtrlKey.
1) If you click a member (Beam) on plan with holding CtrlKey, then all
members on Continuous Beam are selected.
2) Vertical member(Column or Wall) of all floors are selected by clicking and
holding CtrlKey on plan.
3. The procedure to apply the modified details to each member is the same as in
Method 1.
Select Single
Select Window
Select Crossing
Select All
Unselect all
2. Select subjects after clicking [View]> [Select] or [Unselect].
All the selection methods are the same as in midas Gen.
- 22 -
Create Models
- 23 -
Create Models
Auto-Grouping of Members
This option is used to group members which have the same section dimensions and rebar
arrangement. In addition, this option works when members design information is
symmetrically same.
1. ClickModel>Beam>Auto-Grouping of Members to group members
automatically.
2. Click
It is possible not to
mark signs of member
with
the
function
ofView>Display
Option.
- 24 -
Create Models
Manual Grouping
With this option, member group names imported from midas Gen, can be modified. It is
not necessary to use the manual grouping option if you use the same group name as in
midas Gen.
5. Click
6. Click
- 25 -
Create Models
When you modify the members group name to existing groups,
1. An error message will appear if the dimension and amount of
reinforcement of the section is different from other members in the
existing group.
2. A warning message will appear if the amount of reinforcement is less
than that of the existing members in the group.
- 26 -
Create Models
General
Load input information from midas Gen for items that will be printed in General Notes in
the plan. Next, input additional information required to be printed in General Notes.
In addition, you can insert guides, drawings (plan, section) to General Notes in the plan
edit module.
1.
2.
3.
4.
window
You can add or delete rows with right mouse button for adding additional
references.
- 27 -
is
Create Models
Material
Classify structural materials input in midas Gen by floors and print in General Notes.
1. Check structural materials of each floor. Edit them if necessary.
2. Check Plot Rebar and Steel Symbol for printing them in General Notes.
3. Click Splice/Footing tab after checking input information.
Splice/Footing of Rebars
Print rebar splicing and ground condition details in General Notes. (Input these
because there are not available for import from midas Gen.)
- 28 -
Create Models
.
.
.
- 29 -
Create Models
- 30 -
is the absolute
Create Models
1500
C1
C1
C1
WX 1
G1
B1
C1
G1
C1
G1
C1
C1
G1
WX 1
G1
450
450
C1
G1
450
Y1
B1
B1
450
G1
G1
450
1500
G1
C1
G1
1500
B1
WX 1
G1
450
300
B1
G1
B1
WX 1
G1
300
G1
9000
4500
G1
450
1500
4500
Y3
C1
G1
300
C1
Y2
C1
G1
6500
7000
7000
20500
X1
X2
X3
- 31 -
X4
Create Models
3. Structural Drawing
Setting
You can set the format and environment required to draw plans. In addition, it is possible
to save these values and use them in other projects.
Layer Setting
The Layer setting is composed of General Notes, Plan, Section and Member List settings.
- 32 -
Create Models
Font Style setting menu is composed of Drawing Form, General Notes, Plan, Section and
Member List. You can define and edit these font styles.
1. Click Struct. Dwg.>Setting>Text Style.
Check the font styles in Drawing Form, General Notes, Plan, Section and Member
List.
2. Click
- 33 -
Create Models
It is possible to define and edit Dimension Style by Plans, Sections and Member List.
1.ClickStruct. Dwg.>Setting>Dimension Style.
Check Dimension Style for Drawing Form, General Notes, Plan, Section and
Member List.
2. Click
- 34 -
Create Models
Setting Symbol
For setting the format of Group Marks, Rebars Marks and Balloon Marks which will be
printed on the plan drawing.
1.Click Struct. Dwg.>Setting>Symbol.
Symbol window is composed of Members, Rebars and Grid Line Marks tabs.
Check or modify each item.
2. Click
- 35 -
Create Models
- 36 -
Create Models
The values that you can load and save are shown below.
- 37 -
Create Models
- 38 -
Create Models
- 39 -
Create Models
Output Option
Now all the input information for generating drawings is complete. You can choose to view
the output drawings in the inbuilt Edit Drawing Module or output the drawings in
AutoCAD DWG format.
- 40 -
Create Models
If you choose midas CAD
If you choose midas CAD, additional symbols, plans by members, inserting and
editing functions will be available.
In addition, you can save the file in AutoCAD DWG format after completion of editing
in the DrawingShop Edit Drawing Module.
1.Click Struct. Dwg.>Generate Auto Drawing and define the Drawing Form
A1.dwg, Paper Size as
A1, Drawing Scale as
1/100 and
as
Line Type Scale as 5.
2. After completing Drawing Setting, move to the Drawing Information tab.
3. Input
Drawing Number, Drawing Title, Drawing Scale, File Name and
Revision History. This information will be marked on the Drawing Form.
.
4. Once complete, click
The Edit Drawing Module will be loaded and the Drawing Form will be started in
a new tab.
- 41 -
Create Models
- 42 -
Edit Drawing
Create Drawing
List of auto-generated drawings appears in the Drawing Panel. If you select the plan and
drag&drop it, you can create drawings on main screen.
1. Double click Generate Auto Dwg.
st
2. Drag the plan of the 1 floor at Drawing Panel and drop it on main screen.
3. Then, the window as shown below will appear. Click
after checking the
Drawing Name, Drawing View Point and Drawing Scale. Define the insertion point
for the plan.
You can create General Notes, Sectional Drawing and Member Lists in the same
way.
It
is possible to check
the plan in preview
window with the zoom
out/in functions by using
a mouse wheel.
- 43 -
Edit Drawing
Line Up Drawing
Arrange the plan by using AutoCAD basic commands.
1. Arrange the plan by using the move function.
This function is the same as in AutoCAD.
2. If a plan created by Drag&Drop is unnecessary, you can delete it with the erase
function which is the same as in AutoCAD.
- 44 -
Edit Drawing
- 45 -
Edit Drawing
2.
3.
4. Draw>Stair>Scissor Stair.
Select Stair Type at
. It is classified into Top Floor and Typical Floor/Lowest
Floor. Choose Typical Floor.
5.
6.
7. Click
8.
- 46 -
Edit Drawing
- 47 -
Edit Drawing
D10@200
D10@200
150
D10@200
D10@200
D10@200
15
D10@200
150
0
D10@200
D10@200
- 48 -
Edit Drawing
2. Framing Plan
- 49 -
Edit Drawing
3. Sectional Drawing
- 50 -
Edit Drawing
5.
- 51 -
Edit Drawing
Printing
midas DrawingShop offers the option of printing according to Line Weight, Line Width,
and defined Color. The printing method is same as in AutoCAD.
Line Weight
Line Weight or thickness of line defined in Format > Line Weight.
Line Width
Thickness of line set when PolyLine and Rectangle were created.
Color
The color of the selected line in Format>Color or selected color of Layer.
1. ExecuteFile>Print.
2. Set [Print/Plotter Setting] device.
Click Plot Setting
and window
will appear.
Define device of Print/Plotter, size of Paper and Paper Orientation.
Modification is available at
- 52 -
Edit Drawing
Consecutive Printing
This function makes it possible to print plans consecutively. With this function, you can
set the print options on each selected plan.
1. ExecuteFile > Batch Plot. The batch plot window will appear as shown
below.
Printing is possible by plans of Plan Creating Module
Module
You can select several plans at a time by dragging them and holding left button of
mouse.
You can arrange the name of the plans in ascending or descending order by double
clicking Number and Name of Plan in the header row of the table.
Select the blocks of Layer#2, Layer#3, Layer#4 by using left button of mouse. The
cell is highlighted
as shown below.
in
only for the plans for which the print setting is complete
for consecutive printing of plans.
- 53 -