Professional Documents
Culture Documents
There is a tiny little magnet that falls off and/or has reportedly been put on
backwards (fell off is what happened to me) on the auger assembly. It's near
the black auger chute on the end of a shaft. It's tiny--a little bigger than a
grain of rice. I had to replace the auger shaft assembly but if you can find
the magnet, you can super glue it back on.
Helpful 0
Not Helpful
Flag
iteminconline
107 Answers
SOURCE:
Phaser 7400 LCD is blank. How can that be fixed?
Once the LCD is gone blank that means you have to change the control
panel. it's not difficult to change, all you have to do is remove the covers
that are behind the the control panel. Once you have removed the white
covers you can now unscrew the metal hinges. Then you have to insert a
flat head in the small cracks behind the control panel that opens the control
pane blue covers. Now you disconnect the data cable that connects from the
control panel to the machine and that's it. Hope this helps