Professional Documents
Culture Documents
Introduction
In this practice Packet Tracer Skills Exam, you will:
modify STP
Addressing Table
Device
Interface
Address
Subnet Mask
Default Gateway
Fa0/0.10
172.16.10.1
255.255.255.0
n/a
Fa0/0.20
172.16.20.1
255.255.255.0
n/a
Fa0/0.43
172.16.43.1
255.255.255.0
n/a
Fa0/0.67
172.16.67.1
255.255.255.0
n/a
Internet
172.16.67.10
255.255.255.0
172.16.67.1
Wireless
172.16.100.1
255.255.255.0
n/a
SW_DS1
VLAN 43
172.16.43.11
255.255.255.0
172.16.43.1
SW_AC2
VLAN 43
172.16.43.12
255.255.255.0
172.16.43.1
SW_AC3
VLAN 43
172.16.43.13
255.255.255.0
172.16.43.1
PC1
NIC
172.16.10.10
255.255.255.0
172.16.10.1
PC2
NIC
172.16.20.10
255.255.255.0
172.16.20.1
PC3
NIC
172.16.10.11
255.255.255.0
172.16.10.1
PC4
NIC
DHCP assigned
255.255.255.0
172.16.100.1
Router1
WRS
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode
is class.
b.
The privileged EXEC mode uses the following encrypted password: class
Enable Telnet and console line login using the following password: cisco
To configure the switches for remote management access, create and enable interface VLAN
43 on all three switches.
b.
Step 1: Configure SW_DS1 as VTP server and the following VTP parameters:
c.
Step 2: Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTP
domain.
d.
Ports
Assignment
SW_AC2, SW_AC3
Fa0/1 0/10
10
a.
b.
SW_AC2, SW_AC3
Fa0/11 0/17
20
SW_AC3
Fa0/18
67
b.
Using a priority of 4096, set SW_DS1 as the root bridge for all VLANs.
Using a priority of 8192, set SW_AC2 as the backup root bridge for all VLANs.
Use the information in the Addressing Table to configure Router1 for inter-VLAN routing.
b.
No more than 2 MAC addresses are allowed on the FastEthernet 0/2 port for
SW_AC3.
b.
Configure WRS.
The first host address is the 10th host address in the Wireless LAN subnet.
c.
d.
Configure PC4 to access the wireless network that is provided by WRS. PC4 uses DHCP to
obtain addressing information.
Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.
Version 1.0
Created in Packet Tracer 5.2.1 and Marvel 1.0.1
All contents are Copyright 1992 - 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.