Professional Documents
Culture Documents
CCNA 1 R&S Introduction To Networks Chapter 5 Quiz: 1 Fill in The Blank
CCNA 1 R&S Introduction To Networks Chapter 5 Quiz: 1 Fill in The Blank
QUIZ
1 Fill in the blank.
The Ethernet _________ sublayer is responsible for communicating directly with
the physical layer.
Correct Answer
MAC
Mac
mac
2 Which two functions or operations are performed by the MAC sublayer?
(Choose two.)
It is responsible for Media Access Control.*
It performs the function of NIC driver software.
It adds a header and trailer to form an OSI Layer 2 PDU.*
It handles communication between upper and lower layers.
It adds control information to network protocol layer data.
3 What is a characteristic of a contention-based access method?
It processes more overhead than the controlled access methods do.
It has mechanisms to track the turns to access the media.
It is a nondeterministic method.*
It scales very well under heavy media use.
4 Fill in the blank.
On Ethernet networks, the hexadecimal address FF-FF-FF-FF-FF-FF represents
the ______ MAC address.
Correct Answer
broadcast
Broadcast
BROADCAST
Refer to the exhibit. What is the destination MAC address of the Ethernet
frame as it leaves the web server if the final destination is PC1?
00-60-2F-3A-07-AA
00-60-2F-3A-07-BB
00-60-2F-3A-07-CC*
00-60-2F-3A-07-DD
8 Which destination address is used in an ARP request frame?
0.0.0.0
255.255.255.255
FFFF.FFFF.FFFF*
AAAA.AAAA.AAAA
the physical address of the destination host
9
Refer to the exhibit. PC1 issues an ARP request because it needs to send a
packet to PC3. In this scenario, what will happen next?
RT1 will forward the ARP request to PC3.
RT1 will send an ARP reply with its own Fa0/0 MAC address.*
RT1 will send an ARP reply with the PC3 MAC address.
SW1 will send an ARP reply with its Fa0/1 MAC address.
RT1 will send an ARP reply with its own Fa0/1 MAC address.
10
Refer to the graphic. H2 has sent a broadcast message to all of the hosts. If
host H1 wants to reply to the broadcast message, which statement is true?
H1 sends a unicast message to H2, but the switch forwards it to all devices.
H1 sends a unicast message to H2, and the switch forwards it directly to H2.*
H1 sends a broadcast message to H2, and the switch forwards it to all devices.
H1 sends a multicast message to H2, and the switch forwards it directly to H2.
11 Which action is taken by a Layer 2 switch when it receives a Layer 2
broadcast frame?
It drops the frame.
It sends the frame to all ports except the port on which it received the frame.*
It sends the frame to all ports that are registered to forward broadcasts.
It sends the frame to all ports.
12 Which term defines the processing capabilities of a switch by rating how
much data can be processed per second?
switching rate
forwarding rate*
port density
form factor
13 Which interface command must be entered in a Layer 3 switch before an
IPv4 address can be assigned to that interface?
ip classless
no shutdown
no switchport*
switchport