Process Instrumentation & Engineering Co., manufacturing bag filter sequential timer suitable for dust collecting bags to on and off solenoid vales within a time intervals sequentially.
Process Instrumentation & Engineering Co., manufacturing bag filter sequential timer suitable for dust collecting bags to on and off solenoid vales within a time intervals sequentially.
Process Instrumentation & Engineering Co., manufacturing bag filter sequential timer suitable for dust collecting bags to on and off solenoid vales within a time intervals sequentially.
(GENERAL SPECIFICATIONS
Input supply: input supply 220v to 250v AC, SoH
‘Ghannel(@utput: 10 Channe! 24V 6 Output)
‘OnTime ": Pulse Duration Range of Adjustabity 20 to 200 Mii Seconds
‘Mule of 20 See
‘ofTime + Pulse Frequency Range Of Adjustablly 2 to 180 Seconds
Mutipe of 18 See
‘Number of Sequence stops: 2 to through 0, adjustable in ok
(Factor set at 10)
+ Main’ Incoming Fuse 2 Amps. and output Dc fuse SAmps.
Quick Blow Ceramic
‘Temperature: Operating Temperature Range 0 to 50C,
Accuracy
Protection
%
Current Rating in ush curent
Mountings: Four hols of 3 Sm each at four comers
(tel enclosure on request)
Dimensions: Open'ype , 215¢rm length, 147mm wide and 48mm height
Indication
Power on LED provides visual incicaton and pt valve number 1's immediately energized, * Output 1" LED proves
‘Yaual indication of this event. The pit valve wi rerran energized for he langth of te as Set byte tne Sting tim pot
‘SEQUENTIAL TIMER CARD designed by solutions is opecae he Solero plot valves used on Gust collector equipment LED provi visual
Inicaion of energized pot valve sequence, and also ‘power on* indication The number el sequence step is ssjustable orn 2 thesagh 10
Controls are provided o adjust the length of tme betveen valves being energized (puise frequency ) and the lent of ime thatthe val is
‘enerozed (pulse duraton ). Siizon semconductor components onli a} lmnng and ge fncsions
‘Two independent methods of sartng and stopping the timer are proved,
‘The fist method wil automaticaly stop the sequence and eset the controle tothe fst valve postion whenever AIC cower is removed sn then
Teconnected, The second matted is by a remote contact connect f the leminals prowded
Field Wiring Procedure
‘A26 POINT teminal Bock for connection of conductors is proved onthe timer for convenient wiring ofthe conto power, loads and remote
Contact (used )
\Wring Diagram iustrates, where al necessary wring should be mace. Loads should be wed in desired. sequence as needed. Ony ater a
Connection nas been re-chacked, should power be applied tthe convollr Wile bapa
Enclosure: wth compelled instruments cannecting a
he 2
is SF ne
9
bs AY
+ Hyer 000000
CON, TRANSFORMER
Ticotren
Be
Warranty:
‘one year manufacturers warranty on feight paid basis.
‘Al products are manufactured under stct quality corto!
process and ulmoet care is tskon for selection of beet
Components of repuled brands any, Warranty covers
‘components ony,
Instructions:
41 When emole contac is used, jumper between haf
(P1aP2) must be removed
2. Number of sequenced steps are adjustable in fld by
‘moving jumper wire
Dealer
Manufactured by:
Process Instrumentation & Engineering Co.Problem Check Corrective Action
41) Power on led does ‘A) measure voltage at ca
not come on terminals L+N ‘out vole must be 23ORy ex ¢
b) inspect input fuse. Wlactae 3 amPB. IC Vey
‘C) inspect jumper on Kebibh ‘
reat bbard teh mer ito
2) Controller fails to A) inspect jumper between Sager fn
er hat {remote contact teil per botwoen ty ait
Inepeet ring mot used}
23) Contre fast sequence Avinapectlunperon circuit ah mar onto dire,
‘rough weanctoed eae ot bee intone ne wree
load steps
4) Controller output LED's sequence A) inspect wiring tothe affected Correcting wiring tothe,
but one or more toads do not, toad(s) wecensan ne
energize
b) Inspect the load itself Pere ae
bead components.
TESTING & QC PASSED 24X7DAYS LINE LOAD TES y
‘.Number of Sequence Steps: 2 through above , adjustable in fleld SEQUace chaNNEL TEST
2. Pulse Duration Range of Agjustal
ity: 20 to 200 Miliseconds. ON TIME xD ustaBiLiTY
3. Pulse Frequeney Range of Adjustability :2 to 180 Seconds. OFF TIMe ADwusTABILITY
4. Operating Temperature Range oC to 50C. TRANSFORMER, ETC,
5. Repetitive Accuracy On Time Sequence : +/- 5%
8 Current Rating Per Sequence Step : Max. tn rush Curent 2 at 220 Ac (9 442)
‘OC PASSED PERSON SIGNATURE