Professional Documents
Culture Documents
3g Notes Moshell PDF
3g Notes Moshell PDF
In RXI
pr .<rbs ID>
eg. pr .0095
lk <proxy>
st atmport=ms-x-y
bl
lget ms-2-2 (then check iub number with STR printout see tally or not)
reservedBy
Aal2PathVccTp=b0001a2 <----- iub # = 0001
to deblock E1 port in RXI
lst slot=12.*31
lst Slot=16.*Vc12Ttp=14
ldeb Slot=16.*Vc12Ttp=14
- (Example MS-16-14)
In RBS (when port is ready but E1 not pull through yet so that no alarm)
pr atmport
get <proxy>
ie. get 1345
lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
lst <utrancell>
lst singmu
ldel <utrancell>
lst .b<iub-no>
ldel .<iub-no>
ldel tat1bu
22517 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=1
22518 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynchTp=2
22519 RncFunction=1,IubLink=Iub_TAT1BU,NbapCommon=1
22520 RncFunction=1,IubLink=Iub_TAT1BU,NbapDedicated=1
Second round delete
22516 RncFunction=1,IubLink=Iub_TAT1BU,NodeSynch=1
Third round delete
22515 RncFunction=1,IubLink=Iub_TAT1BU
Complete 1st part (then comes the ldel .b322
ldel .vc322)
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
1 (ENABLED)
IubLink=Iub_MAJAMU,NbapDedicated=1
UniSaalProfile=win100
lst .vc<iub-no>
ldel .vc<iub-no>
======================================================================
=============
2972
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1437
2973
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1436
2974
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1435
2975
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1434
2976
1 (ENABLED) TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
3978
1 (ENABLED) TransportNetwork=1,AtmPort=MS-7-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
4187
1 (ENABLED) TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp1,VpcTp=1,VclTp=vc1432
4484
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1444
4485
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1443
4487
1 (ENABLED) TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc1433
======================================================================
=============
Total: 10 MOs
>>> Mo deleted
8405 TransportNetwork=1,AtmCrossConnection=b297ib
8406 TransportNetwork=1,Aal0TpVccTp=b297sa1
8407 TransportNetwork=1,Aal0TpVccTp=b297sb1
Followed by
ldel .b297
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
8408
8410
8412
8414
TransportNetwork=1,Aal5TpVccTp=b297ca
TransportNetwork=1,Aal5TpVccTp=b297cb
TransportNetwork=1,Aal5TpVccTp=b297da
TransportNetwork=1,Aal5TpVccTp=b297db
4485 TransportNetwork=1,AtmPort=MS-6-1,VplTp=vp101,VpcTp=1,VclTp=vc29732
6375 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29733
6376 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29735
6377 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29743
6378 TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1,VclTp=vc29744
6855 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29732
6856 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29734
6857 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29736
6858 TransportNetwork=1,AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc29737
FINISH RNC part
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
pr .b<iub-no>
RXIKLCC02> pr .b322
3862 TransportNetwork=1,AtmCrossConnection=b322ib
3863 TransportNetwork=1,AtmCrossConnection=b322ia
3879 TransportNetwork=1,AtmCrossConnection=b322db
3880 TransportNetwork=1,AtmCrossConnection=b322da
3883 TransportNetwork=1,AtmCrossConnection=b322cb
3884 TransportNetwork=1,AtmCrossConnection=b322ca
4372 TransportNetwork=1,Aal5TpVccTp=b322qb
4373 TransportNetwork=1,Aal5TpVccTp=b322qa
4513 TransportNetwork=1,UniSaalTp=b322qb
4514 TransportNetwork=1,UniSaalTp=b322qa
4937 TransportNetwork=1,AtmCrossConnection=b322sb1
4940 TransportNetwork=1,AtmCrossConnection=b322sa1
======================================================================
=============
Total: 14 MOs
lk <proxy>
pr aal2routingcase 6012200500<rncid><iub-no>
lget TransportNetwork=1,Aal2RoutingCase=601220050010297
del <proxy>
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
2302
2307
2463
2464
2476
2477
2483
2484
Total:
TransportNetwork=1,AtmCrossConnection=b297sb1
TransportNetwork=1,AtmCrossConnection=b297sa1
TransportNetwork=1,AtmCrossConnection=b297ib
TransportNetwork=1,AtmCrossConnection=b297ia
TransportNetwork=1,AtmCrossConnection=b297db
TransportNetwork=1,AtmCrossConnection=b297da
TransportNetwork=1,AtmCrossConnection=b297cb
TransportNetwork=1,AtmCrossConnection=b297ca
15 MOs attempted, 10 MOs deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
>>> Mo deleted
Run again
3278 TransportNetwork=1,Aal2Sp=1,Aal2Ap=b297
>>> Mo deleted
3457 TransportNetwork=1,UniSaalTp=b297qb
>>> Mo deleted
3459 TransportNetwork=1,UniSaalTp=b297qa
>>> Mo deleted
==============================================================================
=====
Total: 5 MOs attempted, 3 MOs deleted
Run again
Deleting ...
==============================================================================
=====
3094 TransportNetwork=1,Aal5TpVccTp=b297qb
>>> Mo deleted
3095 TransportNetwork=1,Aal5TpVccTp=b297qa
>>> Mo deleted
==============================================================================
=====
Total: 2 MOs attempted, 2 MOs deleted
- remains
==============================================================================
=====
Total: 24 MOs
lst .b<iub-no>
ldel .b<iub-no>
lpr atmport=ms-18-1
lget atmport=ms-18-1
del <proxydown>-<proxytop-1>
del AtmPort=MS-20-1-*
lpr vc<iub>
ldel vc<iub>
lst Slot=18.*Vc12Ttp=1
lbl Slot=18.*Vc12Ttp=*
lst .b<iub-no>
ldel .b<iub-no>
lpr vc<iub>
ldel vc<iub>
get 1
ls -l /p001200/pm/ | grep xml
pst
pmr [-m 5 p 3]
pst
pgetsn <proxy>
pcr <name> <mo-name> <counter-name>
pget <mo-name> <counter-name>
pbl/pdeb <proxy>
pdel <proxy>
pr retdevice
get <proxy>
set <proxy> electricalAntennaTilt <value>
get ret electrical
To set Latitude/Longitude
lgevsm
set
pst
lst cell
get radiolinks (to see how many line/s being used)
In RNC
lst utrancell
st utrancell 1.*0
To check RBS MO
In RBS
st plug
cabx
cab
To change PSC (
In RNC
st plug
cabx
cab
Pr cell
Get proxy
Get
set utrancell=KCC1BU servicearearef LocationArea=1,servicearea=284
get CUV1BU_1 maxtxpowerdl --> in EMAS, click Utrancell, Properties, Cell (PCIPCH in Common Channel)
set CUV1BU_1 maxtxpowerdl 402
maxtxpowerdl value stated as x10dBm (actual = 0.1x)
maxtxpowerdl value usually 0.4 dBm lesser than maxDlPowerCapability (from RBS)
thus if maxDlPowerCapability 422, maxtxpowerdl 418 (422 4)
in P3 - get SOGXBU_1 maximumtransmissionpower
To lock/unlock cells
In RNC
st utrancell=sunwmu
lst sunw
lbl sunw (to lock cell & channels)
bl sunw (to lock cell only)
deb sunw (to unlock)
Get 0
Get 1 (check ntpServerAddressPrimary)
& RBS
Read clock (GMT +8)
ntpconfig info
Check which OMNIFSERVER the node is connected to (i.e ntpServerAddressPrimary) from get 1
lpr atmport
vc32&33 for signaling
lpget 1007 (vc proxy) to see number of ATM traffic cells transferred
get atmport=1-2-2
then : lget Subrack=1,Slot=2,PlugInUnit=1,Etm1=1,E1PhysPathTerm=pp2
to un/lock have to set values 1 or 0
St plug
Deb proxy
Bl proxy
No need to use set 1 or set 0 (only for physical ports) otherwise use deb & bl
To autocreateCV
In RNC
& RBS
Get config
Cv ls (2 CVs will be used for the autocreate CV function)
Set proxy autoCreatedCVIsTurnedOn true/false
Set timeForAutoCreatedCV (UTC time)
Set timeForAutoCreatedCV 13:00 (cv autocreated at 9pm)
tg | grep -i kcc1bu
lh mod1 cell get 1/1/1/1/2/1.44 cellData
lookout for
, sac int 10 }
which states a wrong SAC value for the Utrancell
get utrancell=kcc1bu cid
(cid = SAC + sector number)
get serviceArea=284
to confirm SAC for the cell
To restart Node
In RNC,RXI & RBS
acc 0 restart
poll (to wait 20seconds until node comes up again)
To create CV
In RNC,RXI & RBS
cvms CXP9010373%1_R11G_050725_1516 emfauzi change_ntpserver_ip
cvms CXP9010373%1_R11G_050725_1516 followed by comments for the CV
cvset CXP9010373%1_R11G -- to set the CV startable
get servicearea=132
get locationarea
get routingarea
get externalutrancell LAC --> corresponding LAC changed at neighbour RNC (if defined)
set ExternalUtranCell=uefaMU_1 lac 12050
-->to change the externalutrancell LAC parameter for the
particular cell at another/neighbour RNC
get utrancell=uefa lac
--> to view externalutrancell LAC parameter at neighbour RNC
get utrancell=cinoMU_3
To restart node
In RNC & node B
acc 0 restart
pol
- to get moshell connected once node has restarted
& node B
st plugin
st plugin 1 0
st plugin 0 1
lst plug 0
Get jumper
Get feeder
Get rbs xdl
To check E1 state
In RXI
St ms-20-2
Check whether port locked or not
In RBS
St atmport
Check port lock state
St pp
St pp2
st pp3
st pp4
pr pp(port#)
Lgv
Lgaevsm rather long
- sector 1
- sector 2
- restart AIU
primary ScramblingCode
In RNC
get iska primaryscram
maxDlPowerCapability /maxDl
In RBS
In RBS
redefine TD in VC
In RXI
In RBS
then
lpr AtmPort=1-2-1,VplTp=vp1,VpcTp=1,VclTp=vc39
get the proxy
Check E1 loop
In node
LST carrier
1247
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1
1248
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pccpch=1,Bch=1
1249
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2
1250
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=1
1251
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=2,Fach=2
1252
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1
1253
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Sccpch=1,Pch=1
1254
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Pich=1
1255
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1
1256
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Prach=1,Rach=1
1257
1 (ENABLED) NodeBFunction=1,Sector=1,Carrier=1,Aich=1
===========================================================================
========
Total: 45 MOs - for fully operational site
In node
pr iub pot3
to get RBSID or
get iublink rbsid 255
Pr iub *RBSID*
Get the proxy for the Aal0 - look for the name
RNCBESI01> get IubLink rbsid .8
RXI
pr .124
Utrancell Relations
In node RNC
lpr utrancell=evermu_2 utranrelation
RBSID
In node RBS
Pr iub
1077 ManagedElementData=1
1078 SwManagement=1
(1 means 1 db)
RNC
Lt rncmodule
Get rncmodule
Pr rncmodule (then get proxy oso can)
(7 means 7 db)
aseUlAdmOffset: 40
beMarginAseUl: 0
CPM RL Count: 0
compModeAdm: 15
HSDPA UE Count: 5
<------------------------hsdpaUsersAdm: 20
SF8 RL DL Count: 0
sf8Adm: 1
SF16 RL DL Count: 0
sf16Adm: 16
SF32 RL DL Count: 0
sf32Adm: 32
SF4 RL UL Count: 5
sf4AdmUl: 20
DL Code Allocation Level: 40.23 %
dlCodeAdm: 80 %
beMarginDlCode: 5
UL Interference: -105.2 dBm
Filtered DL Power: 23.44 %
pwrAdm: 75 %
pwrAdmOffset: 10 %
beMarginDlPwr: 10
Congestion State: Uncongested
$
5 user currently
IN STR at RNC
In node RNC
Str
CD12 at the last colum stands for Common Dedicated NodesynchTP 1 & 2 usually indicates the E1
typical values
In node RBS
(uarfcnDl
10662
& uarfcnUl
9712 )
get antenna fq
typical values (fqBandHighEdge 10712 & fqBandLowEdge
10612)
thus if requested value at RNC is 10637 and if the value is between 10612 & 10712 at RBS, change only at RNC
RBS
Ls will show you are in drive D
To go to C drive:
cd /c
Go to java folder
Ls
and you will
ftp 10.78.....
Pw rbs
rbs
Bin
(make sure in Binary and not ASCII)
Cd /c
Cd java
Put host.p12
(ensure host.p12 file in moshell folder ya)
bye
To continuously ping
Ping s 10.78.1.1101
----- OK
In node RNC
In node ATMCC
pr atmcross.*friq
RNC,RXI,ATMCC
pr configuration
4029 TransportNetwork=1,AtmCrossConnection=b23ia
4030 TransportNetwork=1,AtmCrossConnection=b23ib
To check IP connectivity
In node RNC,RXI,ATMCC,RBS
lacc AtmPort=1-2-1 eteloopback
CREATE
(
parent "ManagedElement=1,TransportNetwork=1,AtmPort=MS-27-1,VplTp=vp1,VpcTp=1"
identity "vc12232"
moType VclTp
exception none
nrOfAttributes 3
userLabel String "VclTp vc12232"
externalVci Integer 12232
atmTrafficDescriptorId Ref "ManagedElement=1,TransportNetwork=1,AtmTrafficDescriptor=U4"
)
CREATE
(
parent "ManagedElement=1,TransportNetwork=1"
identity "bCSSQBUib"
moType AtmCrossConnection
exception none
nrOfAttributes 3
userLabel String "AtmCrossConnection bCSSQBUib"
vclTpAId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-271,VplTp=vp1,VpcTp=1,VclTp=vc12232"
vclTpBId Ref "ManagedElement=1,TransportNetwork=1,AtmPort=MS-252,VplTp=vp1,VpcTp=1,VclTp=vc12233"
)
lgaevsmir
Get IUB
RNC
RNCSHTI01> get tubo cell
==============================================================================
===================================
UtranCell=TUBOMU_3
cellReserved
0 (RESERVED)
UtranCell=TUBOMU_2
cellReserved
0 (RESERVED)
UtranCell=TUBOMU_1
cellReserved
0 (RESERVED)
==============================================================================
===================================
Total: 3 MOs
NO 3G RF signal on Phone
Cannot make call must use specific SIM card
NBAP AAL5,
nodesynchTP AAL-0
To check RBS ID
In node RNC
In node
get iublink=iub_airtmu
Will show you the RBSID
lpr AtmCrossConnection=b208
get proxy
see 1 or 101 - will tell you which RXI to look at
RXI
get iublink=iub_airtmu
get ExternalGsmCell=RNB1B1_0
Confbl
gsg
RBS
Open EMAS
Go to SoftwareAllocation
Right click, Add
Choose the specific board/ swallocation
- fact is it will create a SWallocation ID = 1 in the rbs
Use moshell to create an Undo file
U+
Then delete the swallocation
Lt swalloc
Pr swalloc
Del proxy
UThen edit the undo file
To enable trace
In node RBS
te enable bus_send bus_receive NBAP*
get RncModule=6
or
In node RXI
In node
--- can
RBS
N
Mon?
TargetMonitor on disk: Yes
TargetMonitor loaded: No
TargetMonitor started: No
Mon+
te status Ans*
to on NBAP trace
te enable bus_send bus_receive NBAP
to see if NBAP trace is ON or NOT
te status NBAP
$ te status NBAP
pid name
enabled groups
- NBAP
check error info bus_send bus_receive interface object
To disable ---
te disable bus_send bus_receive NBAP
Check status again
$ te status NBAP
pid name
enabled groups
- NBAP
check error info interface object
In node
TeraTerm
User = eric
Pw = ericsson
Monitor 10.78.xx.xx
hi
To check external Open Door alarm in RBS is set to which probable cause
In node RBS
Pr almdevice
RBS
Lpr ret
Acl proxy
253 Equipment=1,SectorAntenna=3,AuxPlugInUnit=2,RetuDeviceGroup=1,RetDeviceSet=1,RetDevice=1
acc 267 forceCalibration
alarm will go away in 2 minutes approx
files in a directory :
lpget AtmPort=MS-12-63,VplTp=vp1,VpcTp=1,VclTp=vc32
pr .153
lpget AtmPort=MS-26-1,VplTp=vp1,VpcTp=1,VclTp=vc15332 -- RXI to RNC (RBS ID= 153)
get antenna fq
To check space in HD
In node
Cabd
vols
reservedBy
2993 TransportNetwork=1,AtmCrossConnection=b0093ca
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
Aal5TpVccTp=b0093qb
userLabel
AtmCrossConnection bISM1BUca
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC
To check
In node RNC