Professional Documents
Culture Documents
http://biz.lgservice.com
Air Conditioner
SVC MANUAL(General)
CAUTION
Before Servicing the unit, read the safety precautions in General SVC manual.
Only for authorized service personnel.
TABLE OF CONTENTS
Part 1 General Information ..........................................................................................................3
1. Safety Precautions........................................................................................................4
2. Model Line Up................................................................................................................7
3. Nomenclature ..............................................................................................................11
Part 2 Functions & Controls......................................................................................................15
1. List of Functions & Accessory ..................................................................................16
2. Air Flow .......................................................................................................................27
3. Air Purifying.................................................................................................................29
4. Installation Functions .................................................................................................30
5. Reliability .....................................................................................................................41
6. Convenience Functions & Controls .........................................................................42
7. Special Function & KIT ...............................................................................................50
Part 3 Basic Control ..................................................................................................................53
1. Normal operation ........................................................................................................54
2 Compressor control ....................................................................................................54
3. EEV( Electronic Expansion Valve) control ...............................................................54
Part 4 Trouble Shooting Guide ...............................................................................................55
1. Self-diagnosis Function ............................................................................................56
2. Pump Down ................................................................................................................58
3. Evacuation (All amount of refrigerant leaked) ........................................................59
4. Gas Charging (After Evacuation)..............................................................................60
5. Cycle Part....................................................................................................................61
6. Electronic Parts..........................................................................................................62
-2-
-3-
1. Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications.
This symbol indicates the possibility of death or serious injury.
This symbol indicates the possibility of injury or damage to properties only.
n Meanings of symbols used in this manual are as shown below.
Be sure to disconnect the power cable plug from the plug socket before disassembling the equipment for a repair.Internal components and circuit boards are at
main potential when the equipment is connected to the power cables. This voltage is extremely dangerous and may cause death or severe injury if come in contact with it.
Do not touch the discharging refrigerant gas during the repair work.
The discharging refrigerant gas.The refrigerant gas can cause frostbite.
Release the refrigerant gas completely at a well-ventilated place first.
Otherwise, when the pipe is disconnected, refrigerant gas or refrigerating
machine oil discharges and it Can cause injury.
When the refrigerant gas leaks during work, execute ventilation. If the refrigerant
gas touches to a fire, poisonous gas generates. A case of leakage of the refrigerant and the closed room full with gas is dangerous because a shortage of oxygen
occurs. Be sure to execute ventilation.
When removing the front panel or cabinet, execute short-circuit and discharge
between high voltage capacitor terminals. If discharge is not executed, an electric
shock is caused by high voltage resulted in a death or injury.
Do not turn the air-conditioner ON or OFF by plugging or unplugging the power
plug. There is risk of fire or electrical shock.
Copyright 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
-4-
Do not turn on the breaker under condition that front panel and cabinet are
removed.
Be sure to earth the air conditioner with an earthing conductor connected to the
earthing terminal.
Conduct repair works after checking that the refrigerating cycle section has
cooled down sufficiently. Otherwise, working on the unit, the hot refrigerating
cycle section can cause burns.
Do not tilt the unit when removing panels. Otherwise, the water inside the unit
can spill and wet floor.
Do not use the welder in a well-ventilated place. Using the welder in an enclosed
room can cause oxygen deficiency.
Be sure to turn off power switch before connect or disconnect connector, or parts
damage may be occurred.
-5-
Check to see if the power cable plug is not dirty or loose. If the plug is dust or
loose it can cause an electrical shock or fire.
Do not use a joined power cable or extension cable, or share the same power
outlet with other electrical appliances. otherwise, it can cause an electrical shock,
excessive heat generation or fire.
Do not insert hands or other objects through the air inlet or outlet while the product is operating. There are sharp and moving parts that could cause personal
injury.
Do not block the inlet or outlet of air flow. It may cause product failure
Check to see if the parts are mounted correctly and wires are connected.
Improper installation and connections can cause an electric shock or an injury.
Check the installation platform or frame has corroded. Corroded installation platform or frame can cause the unit to fall, resulting in injury.
Be sure to check the earth wire is correctly connected.
After the work has finished, be sure to do an insulation tset to check the resistance is 2[Mohm] or more between the charge section and the non-charge metal
section (Earth position). If the resistance value is low, a disaster such as a leak or
electric shock is caused at users side.
Check the drainage of the indoor unit after the repair. If drainage is faulty the
water to enter the room and wet floor.
-6-
2. Model Line Up
2.1 Indoor units
Capacity Index [kW (kBtu/h)]
Category
Chassis
Name
TR
2.5
(9)
3.5
(12)
4-Way
7.1
(24)
8.0
(30)
10.0
(36)
ATNH36GNLE2
[UT36 NN2
ATNH42GMLE2 ATNH48GMLE2 ATNH60GMLE2
[UT42 NM2]
[UT48 NM2]
[UT60 NM2
ABNH18GHLA2 ABNH24GHLA2
[CB18 NH2]
[CB24 NH2]
BH
ABNH30GGLA2 ABNH36GGLA2
[UB30 NG2]
[UB36 NG2]
BG
BR
ABNW18GM1A0 ABNW24GM1A0 ABNW30GM1A0
[CM18 N14]
[CM24 N14]
[UM30 N14]
M1
ABNW36GM2A0 ABNW42GM2A0
[UM36 N24]
[UM42 N24]
M2
ABNW48GM3A0 ABNW60GM3A0
[UM48 N34]
[UM60 N34]
M3
L1
Low
Static
Pressure
L2
ABNH09GL1A2
[CB09L N12]
ABNH12GL2A2 ABNH18GL2A2
[CB12L N22]
[CB18L N22]
ABNH24GL3A2
[CB24L N32]
L3
Ceiling & Floor
VE
VJ
Ceiling Suspended
AVNH09GELA2 AVNH12GELA2
[CV09 NE2]
[CV12 NE2]
UVNH18GJLA2 UVNH24GJLA2 UVNH30GJLA2
[CV18 NJ2]
[CV24 NJ2]
[UV30 NJ2]
UVNH36GKLA2
[UV36 NK2]
VK
VL
Console
QA
Floor standing
PT2
Wall mounted
SV
15.0
(60)
ATNH24GPLE2 ATNH30GPLE2
[CT24 NP2]
[UT30 NP2]
TP
TM
Ceiling
High
Concealed Static
Duct
Pressure
14.0
(48)
ATNH18GQLE2
[CT18 NQ2]
TN
High
Static
Pressure
12.5
(42)
ATNH09GRLE2 ATNH12GRLE2
[CT09 NR2
[CT12 NR2]
TQ
Ceiling
Cassette
5.0
(18)
APNH48GTLA0
[UP48 NT2]
AJNW30GVLA0 AJNW36GVLA0
[UJ30 NV2]
[UJ36 NV2]
-7-
Ceiling Suspended
UVNH18GJLA2 [CV18 NJ2]
UVNH24GJLA2 [CV24 NJ2]
UVNH30GJLA2 [UV30 NJ2]
UVNH36GKLA2 [UV36 NK2]
UVNH42GLLA2 [UV42 NL2]
UVNH48GLLA2 [UV48 NL2]
UVNH60GLLA2 [UV60 NL2]
Console
AQNH09GALA0 [CQ09 NA0]
AQNH12GALA0 [CQ12 NA0]
AQNH18GALA0 [CQ18 NA0]
Floor Standing
Wall mounted
-8-
AUUW096D
[UU09W ULD]
AUUW126D
[UU12W ULD]
AUUW186D2
[UU18W UE2]
1
2.5
3.5
5.0
Chassis
DC Inverter
No. of connectable indoor units
Total capacity index of
connectable indoor units(kW)
Power supply
AUUW246D2
[UU24W U42]
AUUW306D2
[UU30W U42]
AUUW366D2
[UU36W UO2]
1
7.1
8.0
10.0
Chassis
DC Inverter Synchro
AUUW426D2
[UU42W U32]
AUUW486D2
[UU48W U32]
AUUW606D2
[UU60W U32]
1~4
12.5
14.0
Power supply
15.0
Chassis
-9-
DC Inverter
No. of connectable indoor units
Total capacity index of
connectable indoor units(kW)
Power supply
1
10.0
3, 380 - 415V, 50Hz
Chassis
DC Inverter
No. of connectable indoor units
Total capacity index of
connectable indoor units(kW)
Power supply
AUUW428D2
[UU43W U32]
AUUW488D2
[UU49W U32]
AUUW608D2
[UU61W U32]
1~4
12.5
14.0
15.0
Chassis
- 10 -
3. Nomenclature
3.1 Indoor Unit(Global)
ATN
09
2
Serial number
Function
A : Basic, C/L : Plasma, E : Elevation grille
Look
L : Basic
Chassis name only for Low Static Duct
Chassis name
Electrical rating
G : 220~240/50,60/1
Nominal Capacity
Ex) 9,000 Btu/h Class '09',
18,000 Btu/h Class '18'
Model type
C : C/O
H : H/P
Q : DC Inverter C/O
W : DC Inverter H/P
A*N / U*N : Indoor units using R410A
* Indicates Product type
T : Ceiling Cassette Air Conditioner
B : Ceiling Concealed Duct Air Conditioner
V : Ceiling & Floor Air Conditioner
J : Single Split Wall Mounted Air Conditioner
P : Floor Standing Air Conditioner
Q : Console Air Conditioner
U M C
Functions
A:BASIC
C:Plasma
E:Elevation Grille
F:Elevation Grille+Plasma
D: Art Panel
H : Heat Pump
U: Single A
- 11 -
Serial number
Model Type
D : Standard Inverter
- 12 -
09
1
Serial number
Chassis name
Indoor Unit / Outdoor Units
N : Indoor Unit
U : Outdoor Unit
L : Low Static Duct
Nominal Capacity
Ex) 9,000 Btu/h Class '09',
18,000 Btu/h Class '18'
Product type
T : Ceiling Cassette Air Conditioner
B : Ceiling Concealed Duct Air Conditioner
V : Ceiling & Floor Air Conditioner
J : Single Split Wall Mounted Air Conditioner
P : Floor Standing Air Conditioner
Q : Console Air Conditioner
Connectable Outdoor unit type
U : Indoor units only for Single A systems
C : Common Indoor Unit for Multi and Single A
U M C
Functions
A: Basic
H : Heat Pump
U: Single A
- 13 -
U4
Serial number
Outdoor unit chassis name
Model type
W : Inverter
Cooling capacity (kBtu/h)
Type
U : Outdoor units
Model type
U : Universal model
- 14 -
- 15 -
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
CAC network
function
Special
function kit
Others
Functions
Air supply outlet
Airflow direction control (left & right)
Airflow direction control (up & down)
Auto swing (left & right)
Auto swing (up & down)
Airflow steps (fan/cool/heat)
Chaos wind(auto wind)
Jet cool/heat
Swirl wind
Triple filter (Deodorizing)
Plasma air purifier
Allergy Safe filter
Long-life prefilter (washable / anti-fungus)
Drain pump
E.S.P. control*
Electric heater
High ceiling operation*
Auto Elevation Grille*
Hot start
Self diagnosis
Soft dry operation
Auto changeover**
Auto cleaning
Auto operation(artificial intelligence)**
Auto Restart
Child lock*
Forced operation
Group control*
Sleep mode
Timer(on/off)
Timer(weekly)*
Two thermistor control*
Wired remote controller
Deluxe wired remote controller
Simple wired remote controller
Simple Wired remote controller(for hotel use)
Wireless remote controller
General central controller (Non LGAP)
Network Solution(LGAP)
Dry contact
PI 485(for Indoor Unit)
Zone controller
CTI(Communication transfer interface)
Electronic thermostat
Remote temperature sensor
Telecom shelter controller
- 16 -
4
X
Auto
X
O
4/5/4
O
O/X
O
X
PTPKQ0
X
O
O
X
X
O
X
O
O
O
O**
X
O**
O
O
O
O
O
O
O
O
O
PQRCUDS0 / PQRCUDS0B / PQRCUDS0S
PQRCVCL0Q / PQRCVCL0QW
PQRCHCA0Q / PQRCHCA0QW
PQWRHQ0FDB
X
O
PQDSA(1)/PQDSB(1) / PQDSBC
X
X
X
X
PQRSTA0
X
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
CAC network
function
Special
function kit
Others
Functions
Air supply outlet
Airflow direction control (left & right)
Airflow direction control (up & down)
Auto swing (left & right)
Auto swing (up & down)
Airflow steps (fan/cool/heat)
Chaos wind(auto wind)
Jet cool/heat
Swirl wind
Triple filter (Deodorizing)
Plasma air purifier
Allergy Safe filter
Long-life prefilter (washable / anti-fungus)
Drain pump
E.S.P. control*
Electric heater
High ceiling operation*
Auto Elevation Grille*
Hot start
Self diagnosis
Soft dry operation
Auto changeover**
Auto cleaning
Auto operation(artificial intelligence)**
Auto Restart
Child lock*
Forced operation
Group control*
Sleep mode
Timer(on/off)
Timer(weekly)*
Two thermistor control*
Wired remote controller
Deluxe wired remote controller
Simple wired remote controller
Simple Wired remote controller(for hotel use)
Wireless remote controller
General central controller (Non LGAP)
Network Solution(LGAP)
Dry contact
PI 485(for Indoor Unit)
Zone controller
CTI(Communication transfer interface)
Electronic thermostat
Remote temperature sensor
Telecom shelter controller
- 17 -
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
CAC network
function
Special
function kit
Others
Functions
- 18 -
2
X
X
X
X
3/3/3
X
O/X
X
X
X
X
O
ABDPG
O
X
X
X
O
O
O
O**
X
O**
O
O
X
O
X
O
O
O
O
X
X
X
X
X
O
PQDSA(1)/PQDSB(1) / PQDSBC
X
ABZCA
X
X
PQRSTA0
X
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
Network
function
Special
function kit
Others
Functions
Air supply outlet
Airflow direction control (left & right)
Airflow direction control (up & down)
Auto swing (left & right)
Auto swing (up & down)
Airflow steps (fan/cool/heat)
Chaos wind(auto wind)
Jet cool/heat
Swirl wind
Triple filter (Deodorizing)
Plasma air purifier
Allergy Safe filter
Long-life prefilter (washable / anti-fungus)
Drain pump
E.S.P. control*
Electric heater
High ceiling operation*
Auto Elevation Grille*
Hot start
Self diagnosis
Soft dry operation
Auto changeover**
Auto cleaning
Auto operation(artificial intelligence)**
Auto Restart
Child lock*
Forced operation
Group control*
Sleep mode
Timer(on/off)
Timer(weekly)*
Two thermistor control*
Standard Wired remote controller
Deluxe wired remote controller
Simple wired remote controller
Simple Wired remote controller(for hotel use)
Wireless remote controller
General central controller (Non LGAP)
Network Solution(LGAP)
Dry contact
PI 485(for Indoor Unit)
Zone controller
CTI(Communication transfer interface)
Electronic thermostat
Remote temperature sensor
Group control wrie
Telecom shelter controller
Note
1. * : These functions need to connect the wired remote controller.
2. ** : Auto Changeover function can be operated when connected with Single A.
Auto Operation function can be operated whne connected with Mutli F/FDX.
3. Group control, Dry Contact, Auto Changeover functions are not available for units which are connected with synchro models.
O : Applied
X : Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
- 19 -
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
Network
function
Special
function kit
Others
Functions
Ceiling Suspended
- 20 -
4. Wall mounted
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual
control
CAC network
function
Special
function kit
Others
Function
1
Manual
Auto
X
O
3/4/4
O
O/O
X
O
X
X
O
X
X
X
X
X
O
O
O
O
O
X
O
O
O
X
O
O
X
X
PQRCVSL0 / PQRCVSL0QW
X
X
X
O
X
O
PQDSA(1) / PQDSB(1) / PQDSC
X
X
X
X
X
X
Note
1. * : These functions need to connect the wired remote controller.
2. ** : Auto Changeover function can be operated when connected with Single A.
O : Applied
X : Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate package.
- 21 -
5. Outdoor
DC Inverter Single A (1)
Defrost / Deicing
High pressure switch
Low pressure switch
Phase protection
Restart delay (3-minutes)
Self diagnosis
Soft start
Test function
Night Silent Operation
AUUW096D
[UU09W ULD]
O
X
X
X
O
O
O
O
X
AUUW126D
[UU12W ULD]
O
X
X
X
O
O
O
O
X
AUUW186D2
[UU18W UE2]
O
X
X
X
O
O
O
X
O
Network soluation(LGAP)
AUUW096D
[UU09W ULD]
AUUW126D
[UU12W ULD]
AUUW186D2
[UU18W UE2]
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O (Logical operation)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O (Logical operation)
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
X
O (Logical operation)
Category
Reliability
Convenience
CAC network
function
Functions
Device
Central
Controller
BNU (Building
Network Unit)
Installation
ODU Dry Contact
Low Ambient Kit
Simple Controller
Function controller
Function Scheduler
AC Ez
AC Smart ll
Option Kit (SD card type)
ACP(Advanced Control Platform)
AC Manager
PI485
DO(Digital Output) Kit
LONWORKS Gateway
BACnet Gateway
Y branch
Header branch
Air Guide
[Note]
O: Applied, X: Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate
package.
- 22 -
Defrost / Deicing
High pressure switch
Low pressure switch
Phase protection
Restart delay (3-minutes)
Self diagnosis
Soft start
Test function
Night Silent Operation
AUUW246D2
[UU24W U42]
O
X
X
X
O
O
O
X
O
AUUW306D2
[UU30W U42]
O
X
X
X
O
O
O
X
O
AUUW366D2
[UU36W UO2]
O
X
X
X
O
O
O
X
O
Network soluation(LGAP)
AUUW246D2
[UU24W U42]
AUUW306D2
[UU30W U42]
AUUW366D2
[UU36W UO2]
Category
Reliability
Convenience
CAC network
function
Functions
Device
Central
Controller
BNU (Building
Network Unit)
Installation
ODU Dry Contact
Low Ambient Kit
Simple Controller
Function controller
Function Scheduler
AC Ez
AC Smart ll
Option Kit (SD card type)
ACP(Advanced Control Platform)
AC Manager
PI485
DO(Digital Output) Kit
LONWORKS Gateway
BACnet Gateway
Y branch
Header branch
Air Guide
PQCSB101S0
PQCSB101S0
PQCSB101S0
PQCSB101S0 + PQCSC101S0 PQCSB101S0 + PQCSC101S0 PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0 PQCSB101S0 + PQCSD130A0 PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSZ250S0
PQCSZ250S0
PQCSW320A1E
PQCSW320A1E
PQCSW320A1E
PQCSE341A0 / PQCSE342A0 PQCSE341A0 / PQCSE342A0 PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E PQCPA11A0E / PQCPB11A0E PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PQCSS520A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PMNFP14A0/PMNFP14A1 PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFP00T0
PQNFP00T0
PQNFB16A1
PQNFB16A1
PQNFB16A1
PQNFB17B0
PQNFB17B0
PQNFB17B0
X
X
X
X
X
X
X
X
X
X
X
O (On/off control)
O (Logical operation)
O (Logical operation)
O (Logical operation)
[Note]
O: Applied, X: Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate
package.
- 23 -
Defrost / Deicing
High pressure switch
Low pressure switch
Phase protection
Restart delay (3-minutes)
Self diagnosis
Soft start
Test function
Night Silent Operation
AUUW426D2
[UU42W U32]
O
X
X
X
O
O
O
X
O
AUUW486D2
[UU48W U32]
O
X
X
X
O
O
O
X
O
AUUW606D2
[UU60W U32]
O
X
X
X
O
O
O
X
O
Network soluation(LGAP)
AUUW426D2
[UU42W U32]
AUUW486D2
[UU48W U32]
AUUW606D2
[UU60W U32]
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
Category
Reliability
Convenience
CAC network
function
Functions
Device
Central
Controller
BNU (Building
Network Unit)
Installation
ODU Dry Contact
Low Ambient Kit
Simple Controller
Function controller
Function Scheduler
AC Ez
AC Smart ll
Option Kit (SD card type)
ACP(Advanced Control Platform)
AC Manager
PI485
DO(Digital Output) Kit
LONWORKS Gateway
BACnet Gateway
Y branch
Header branch
Air Guide
[Note]
O: Applied, X: Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate
package.
- 24 -
Reliability
Convenience
network
function
Defrost / Deicing
High pressure switch
Low pressure switch
Phase protection
Restart delay (3-minutes)
Self diagnosis
Soft start
Test function
Night Silent Operation
AUUW368D2
[UU37W UO2]
O
X
X
O
O
O
O
X
O
AUUW428D2
[UU43W U32]
O
X
X
O
O
O
O
X
O
Network solution(LGAP)
AUUW368D2
[UU37W UO2]
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
AUUW428D2
[UU43W U32]
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
Functions
Device
Central
Controller
BNU (Building
Network Unit)
Installation
Simple Controller
Function controller
Function Scheduler
AC Ez
AC Smart ll
Option Kit (SD card type)
ACP(Advanced Control Platform)
AC Manager
PI485
DO(Digital Output) Kit
LONWORKS Gateway
BACnet Gateway
Y branch
Header branch
Air Guide
[Note]
O: Applied, X: Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate
package.
- 25 -
Reliability
Convenience
network
function
Defrost / Deicing
High pressure switch
Low pressure switch
Phase protection
Restart delay (3-minutes)
Self diagnosis
Soft start
Test function
Night Silent Operation
AUUW488D2
[UU49W U32]
O
X
X
O
O
O
O
X
O
AUUW608D2
[UU61W U32]
O
X
X
O
O
O
O
X
O
Network solution(LGAP)
AUUW488D2
[UU49W U32]
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
AUUW608D2
[UU61W U32]
PQCSB101S0
PQCSB101S0 + PQCSC101S0
PQCSB101S0 + PQCSD130A0
PQCSZ250S0
PQCSW320A1E
PQCSE341A0 / PQCSE342A0
PQCPA11A0E / PQCPB11A0E
PQCSS520A0E
PMNFP14A0/PMNFP14A1
PQNFP00T0
PQNFB16A1
PQNFB17B0
X
X
X
O (On/off control)
O (Logical operation)
Functions
Device
Central
Controller
BNU (Building
Network Unit)
Installation
Simple Controller
Function controller
Function Scheduler
AC Ez
AC Smart ll
Option Kit (SD card type)
ACP(Advanced Control Platform)
AC Manager
PI485
DO(Digital Output) Kit
LONWORKS Gateway
BACnet Gateway
Y branch
Header branch
Air Guide
[Note]
O: Applied, X: Not applied
Accessory model name : Installed at field, ordered and purchased separately by the corresponding model name, supplied with separate
package.
- 26 -
2. Air flow
2.1 Auto swing (left & right)
By the horizontal airflow direction control key input, the left/right louver automatically operates with the auto swing or it
is fixed to the desired direction.
Left
Right
110 ~ 120
110 ~ 120
Open
110~120
Mode9
Mode8
Mode7
Mode6
Mode5
Mode4
Mode3
7~8
Mode2
OPEN
NOTE: Some Models are different by swing width and swing pattern.
- 27 -
Step
Discription
LL
L
M
H
SH
Auto
Vane 2
Vane 1
Vane 3
Vane 4
Comparison of Air Flow Types
4-Open (conventional)
- 28 -
3. Air purifying
3.1 PLASMA Air Purifying System
The PLASMA Air Purifying System not only removes microscopic contaminants and dust, but also removes house
mites, pollen, and pet fur to help prevent allergic diseases like asthma. This filter that can be used over and over again
by simply washing with water.
Dust electrode discharge
Dust particles
Photo-Catalyst Coated Mesh
Ionizer
+4.8KV discharge +
+
Polluted Air
+
+
Generating plasma
Odour
Odour molecule
- 29 -
4. Installation Functions
4.1 E.S.P. (External Static Pressure) Setting
This function is applied to only duct type. Setting this in other cases will cause malfunction.
If pressing
button repeatedly, it moves to static pressure
selection menu as picture below.
button.
Function Code
4 Press
5
Pressure
button to save.
Pressing
button will exit settings mode.
After setup, it automatically gets out of setup mode if there is no button
input for 25 seconds.
When exiting without pressing set button, the manipulated value is not
reflected.
Pressure selection
01
02
03
04
Zone state
Variable
Fixed
Variable
Fixed
V-H
F-H
V-L
F-L
- 30 -
pressing
button long for 3 seconds, it enters into remote
1 Ifcontroller
setter setup mode.
- If pressing once shortly, it enters into user setup mode.
Please press more than 3 seconds for sure.
into ESP setup mode by using
2 Iftheentering
picture below.
ESP step
Function Code
button, it indicates as
ESP value
Function code,
ESP code
ESP value
to ESP value setting by pressing
4 Move
(It is 000 when delivering
button.
When setting ESP value on the product without very weak wind or power wind function, it may not work.
Press
button to save.
button to exit.
8 Press
After setup, it automatically gets out of setup mode if there is no button
input for 25 seconds.
When exiting without pressing set button, the manipulated value is not
reflected.
Function code, ESP code
ESP value
Please be careful not to change the ESP value for each fan step.
It does not work to setup ESP value for very low/power step for some products.
ESP value is available for specific range belongs to the product.
- 31 -
OPER
MODE
Function Code
Existing condition
When pressing
button, currently
established static pressure value will be set
up.
OPER
MODE
- Static Pressure (Code 06) setting will not be used if Static Pressure Step (Code 32) setting is being
used.
- For the static pressure value for each step, refer to the next page Table. 1
- 32 -
Table 1
ABNH18GHLA2
(Unit: CMM)
Setting Value
100
105
110
115
120
125
130
135
140
145
2.5(25)
12.8
13.9
15.2
16.5
17.8
-
Static Pressure[mmAq(Pa)]
4(39)
6(59)
12.7
14.0
15.3
12.7
16.5
14.0
17.8
15.3
16.5
17.5
-
8(78)
12.6
13.5
14.5
16.5
ABNH24GHLA2
(Unit: CMM)
Setting Value
105
110
115
120
125
130
135
140
145
150
2.5(25)
13.9
15.2
16.5
17.8
-
Static Pressure[mmAq(Pa)]
4(39)
6(59)
12.7
14.0
15.3
12.7
16.5
14.0
17.8
15.3
16.5
17.6
-
8(78)
12.6
13.5
14.5
16.5
18.0
ABNH30GGLA2
(Unit: CMM)
Setting Value
100
105
110
115
120
125
130
135
140
4(49)
Static Pressure[mmAq(Pa)]
6(59)
8(78)
20.8
23.2
26.0
-
19.5
21.5
23.5
26.3
-
- 33 -
19.1
21.6
24.0
27.0
-
10(98)
19.9
22.7
25.9
-
4(49)
25.9
27.9
29.9
32.0
-
Static Pressure[mmAq(Pa)]
6(59)
8(78)
26.4
28.5
25.0
30.7
27.5
32.9
29.9
32.3
-
6(59)
31.5
36.3
41.3
45.4
-
Static Pressure[mmAq(Pa)]
8(78)
10(98)
29.8
34.5
28.4
39.7
33.5
44.1
38.6
44.2
-
6(59)
31.5
36.3
41.3
45.4
-
Static Pressure[mmAq(Pa)]
8(78)
10(98)
29.8
34.5
28.4
39.7
33.5
44.1
38.6
44.2
-
10(98)
26.0
28.5
31.0
-
ABNH42GRLA2
(Unit: CMM)
Setting Value
85
90
95
100
105
110
115
12(118)
27.3
33.1
38.9
44.7
ABNH48GRLA2
(Unit: CMM)
Setting Value
85
90
95
100
105
110
115
12(118)
27.3
33.1
38.9
44.7
ABNH60GRLA2
Setting Value
95
100
105
110
115
120
(Unit: CMM)
6(59)
8(78)
Static Pressure[mmAq(Pa)]
10(98)
41.3
45.4
49.5
-
39.7
44.1
48.5
-
38.6
44.2
49.8
-
- 34 -
12(118)
38.9
44.7
50.5
14(137)
42.2
48.1
Model
ABNW18GM1A0
ABNW24GM1A0
Model
ABNW30GM1A0
Step
CMM
LOW
MID
HIGH
LOW
MID
HIGH
13
14.5
16.5
14.5
16.5
18
Step
LOW
MID
HIGH
CMM
18
20
22
Model
Step
CMM
ABNW36GM2A0
LOW
MID
HIGH
24
28
32
Model
Step
CMM
ABNW42GM2A0
LOW
MID
HIGH
28
33
38
2(20)
2.5(25)
3(29)
4(39)
32:01
73
76
85
76
85
90
32:02
74
77
87
77
87
92
32:03
77
85
90
85
90
95
32:04
88
91
94
89
94
99
2.5(25)
4(39)
5(49)
6(59)
32:01
96
102
110
32:02
102
110
117
32:03
107
114
121
32:04
104
110
118
4(39)
5(49)
6(59)
7(69)
32:01
88
93
101
32:02
91
97
105
32:03
95
101
109
32:04
100
105
112
5(49)
6(59)
7(69)
8(78)
32:01
100
108
117
32:02
103
111
120
32:03
106
114
124
32:04
110
118
127
Static Pressure[mmAq(Pa)]
6(59)
8(78) 10(98) 12(118) 13(127) 14(137) 15(147)
Setting Value
32:05
32:06
32:07
32:08
32:09
32:10
32:11
117
93
103
111
120
125
128
97
107
114
121
125
128
131
118
103
110
125
128
131
134
97
107
114
121
125
128
131
103
110
118
125
128
131
134
108
115
122
129
132
135
138
Static Pressure[mmAq(Pa)]
7(69)
8(78)
9(88)
Setting Value
32:05
32:06
32:07
114
118
122
127
121
125
127
130
133
10(98)
32:08
125
130
136
32:10
132
135
138
32:11
134
137
140
Static Pressure[mmAq(Pa)]
8(78)
9(88) 10(98) 11(108) 12(118) 13(127) 15(147)
Setting Value
32:05
32:06
32:07
32:08
32:09
32:10
32:11
101
108
113
115
118
118
118
108
115
118
120
124
124
124
115
119
123
126
128
128
128
Static Pressure[mmAq(Pa)]
9(88) 10(98) 11(108) 12(118) 13(127) 14(137) 15(147)
Setting Value
32:05
32:06
32:07
32:08
32:09
32:10
32:11
118
114
121
125
128
133
136
122
125
128
131
134
138
141
130
133
135
138
141
144
147
NOTE
1. Be sure to set the value refering table 1. Unexpected set value will cause mal-function.
2. Table 1 is based at 230V. According to the fluctuation of voltage, air flow rate varies.
3. Factory Set(External Static Pressure) each Model
Model
ABNW18GM1A0
ABNW24GM1A0
ABNW30GM1A0
ABNW36GM2A0
ABNW42GM2A0
Maximum value
115
120
120
- 35 -
Mode
ABNH18GHLA2
High
(factory set)
ABNH24GHLA2
High
(factory set)
ABNH30GGLA2
High
(factory set)
ABNH36GGLA2
High
(factory set)
ABNH42GRLA2
High
(factory set)
ABNH48GRLA2
High
(factory set)
ABNH60GRLA2
High
(factory set)
Set value
Hl
Mid
Low
Hl
Mid
Low
Hl
Mid
Low
Hl
Mid
Low
Hl
Mid
Low
Hl
Mid
Low
Hl
Mid
145
140
134
150
145
136
137
131
126
152
146
141
106
102
99
110
106
103
123
120
Low
115
Standard
ESP(mmAq(Pa))
8(78)
8(78)
10(98)
10(98)
10(98)
10(98)
10(98)
CMM
16.5
14.5
13.0
18.0
16.5
14.0
26.5
23.0
20.0
32.0
29.0
26.5
38.0
36.0
32.0
40.0
35.0
30.0
50.0
45.0
Lower Limit of
External Static
Pressure
(mmAq(Pa))
Upper Limit of
External Static
Pressure
(mmAq(Pa))
2.5(25)
8(78)
2.5(25)
8(78)
2.5(25)
10(98)
4(39)
10 (98)
5(49)
12(118)
5(49)
12(118)
6(59)
14(137)
40.0
- 36 -
0 (0)
5.03
5.60
6.19
6.79
7.41
8.05
8.71
9.38
10.07
-
1 (10)
4.85
5.44
6.05
6.67
7.31
7.96
8.63
9.32
10.03
-
Static Pressure(mmAq(Pa))
2 (20)
3 (30)
4.57
5.17
5.80
4.80
6.43
5.44
7.09
6.09
7.76
6.76
8.45
7.45
9.16
8.16
9.88
8.88
9.62
10.38
-
4 (40)
4.97
5.64
6.33
7.04
7.76
8.50
9.26
10.03
0 (0)
6.50
7.34
8.20
9.07
9.96
10.87
11.79
12.73
13.69
14.67
15.66
16.67
-
1 (10)
6.70
7.55
8.43
9.32
10.22
11.15
12.09
13.05
14.02
15.01
16.02
-
Static Pressure(mmAq(Pa))
2 (20)
3 (30)
6.69
7.56
6.47
8.45
7.36
9.36
8.27
10.28
9.19
11.22
10.14
12.18
11.09
13.16
12.07
14.15
13.06
15.16
14.07
16.18
15.10
16.14
-
(Unit : CMM)
4 (40)
6.96
7.89
8.83
9.78
10.76
11.75
12.76
13.79
14.83
15.89
0 (0)
10.19
12.18
13.81
15.16
16.30
17.31
18.27
19.26
20.34
21.60
-
1 (10)
10.71
12.34
13.69
14.83
15.85
16.80
17.79
18.87
20.13
21.64
-
5 (50)
5.08
5.79
6.51
7.25
8.01
8.78
5 (50)
6.35
7.30
8.25
9.23
10.22
11.23
12.26
13.30
14.36
(Unit : CMM)
Static Pressure(mmAq(Pa))
2 (20)
3 (30)
11.09
12.19
13.38
10.71
14.36
11.85
15.23
12.86
16.07
13.82
16.93
14.80
17.89
15.88
19.01
17.14
20.36
18.66
22.01
20.50
22.75
4 (40)
10.97
11.93
12.91
13.99
15.25
16.76
18.61
20.86
5 (50)
10.49
11.57
12.83
14.35
16.19
18.44
Note :
1. The above table shows the correlation between the air rates and E.S.P.
- 37 -
Table 1
ABNW18GM1A0, ABNW24GM1A0
Setting value
70
75
80
85
90
95
100
105
110
115
120
125
130
135
140
145
150
2.5(25)
11.3
12.8
14.4
15.9
17.5
19.0
20.6
22.1
23.7
(Unit : CMM)
4(39)
11.4
13.2
15.0
16.7
18.5
20.3
22.1
23.8
10.2
12.0
13.7
15.5
17.3
19.0
20.8
22.6
10.7
12.5
14.3
16.1
17.9
19.7
21.5
23.3
11.1
13.1
15.1
17.1
19.1
21.2
23.2
10.0
12.2
14.3
16.5
18.7
20.8
23.0
14(137)
11.3
13.6
15.8
18.0
20.3
22.5
ABNW30GM1A0
Setting value
85
90
95
100
105
110
115
120
125
130
135
140
15(147)
11.9
14.3
16.7
19.1
21.5
23.8
(Unit : CMM)
2.5(25)
16.8
18.1
19.4
20.7
22.0
23.3
24.6
25.9
4(39)
14.6
15.9
17.2
18.5
19.8
21.1
22.4
23.7
25.1
15.0
16.3
17.7
19.1
20.5
21.8
23.2
24.6
13.9
15.3
16.8
18.3
19.7
21.2
22.7
24.2
13.0
14.6
16.3
17.9
19.6
21.2
22.9
24.5
14.2
15.9
17.5
19.2
20.9
22.6
14(137)
15(147)
13.3
15.2
17.1
19.0
20.9
14.6
16.3
18.1
19.9
Note :
1. The above table shows the correlation between the air rates and E.S.P.
- 38 -
ABNW36GM2A0
Setting value
85
90
95
100
105
110
115
120
125
128
(Unit : CMM)
4(39)
24.9
27.6
30.4
33.1
35.9
38.6
6(59)
22.7
25.7
28.7
31.7
34.7
37.8
20.7
24.0
27.3
30.5
33.8
37.1
20.8
24.3
27.9
31.4
35.0
37.1
20.6
23.8
27.0
30.1
32.0
14(137)
15(147)
22.4
25.7
27.6
20.5
23.7
25.7
ABNW42GM2A0
Setting value
90
95
100
105
110
115
120
125
130
135
140
145
150
155
(Unit : CMM)
5(49)
22.2
25.1
28.0
30.9
33.8
36.7
39.7
42.6
6(59)
22.3
25.4
28.5
31.6
34.8
37.9
41.0
44.1
23.3
26.8
30.3
33.8
37.3
40.8
44.3
24.4
28.3
32.2
36.1
40.0
43.9
23.5
27.5
31.6
35.6
39.7
43.7
14(137)
26.1
30.4
34.6
38.9
43.1
15(147)
28.0
32.4
36.8
41.2
45.6
Note :
1. The above table shows the correlation between the air rates and E.S.P.
- 39 -
pressing
button long for 3 seconds, it enters into
1 Ifremote
controller setter setup mode.
- If pressing once shortly, it enters into user setup mode.
Please press more than 3 seconds for sure.
Function Code
4 Press
button,
button. (01:Low,
Thermistor setting
button to save.
Description
01
Low
02
Medium
03
High
04
Very high
- 40 -
5. Reliability
5.1 Hot start
When heating is started, the indoor fan is stopped or very slow to prevent the cold air carry out
When the temp. of heat exchanger reach 30C(model by model), indoor fan is started.
Setting Temp.
25C
intake air temp. -1C
intake air temp. -0.5C
intake air temp.
18C
While compressor off, the indoor fan repeats low airflow speed and stop.
While the intake air temp is between compressor on temp. and compressor off temp., 10-min dehumidification operation and 4-min compressor off repeat.
Compressor ON Temp. Setting Temp+0.5C
Compressor OFF Temp. Setting Temp-0.5C
In 10-min dehumidification operation, the indoor fan operates with the low airflow speed.
- 41 -
- 42 -
Unit
Operation
(Cooling Only)
ON
OFF
ON
Indoor
Fan
OFF
Setting step
L Low
OFF
ON
Comp.
OFF
Setting step
Switching point
+4C
+2C
+0.5C
SET Temp.
-0.5C
-2C
Cooling
operation
Heating operation
Cooling
operation
- 43 -
button to exit.
4 Press
After setup, it automatically gets out of setup mode if there is no
button input for 25 seconds.
When exiting without pressing set button, the manipulated value is
not reflected.
Operating Mode
Setting temp.
over 24C
Cooling
22C
21~24C
Healthy Dehumidification
23C
below 21C
Heating
24C
Setting speed of
indoor fan
High speed
- 44 -
GND
Signal wire
12V
GND
Signal wire
When controlling multiple indoor units with event communication function with one remote controller, you must change the
master/slave setting from the indoor unit.
- Indoor units, the master/slave configuration of the product after completion of indoor unit power OFF and then ON the
power after 1 minutes elapsed sign up.
- For ceiling type cassette and duct product group, change the switch setting of the indoor PCB.
- For wall-mount type and stand type product, change the master/slave setting with the wireless remote controller. (Refer to
wireless remote controller manual for detail)
h When installing 2 remote controllers to one indoor unit with event communication function, set the master/slave of the
remote controller. (Refer to remote controller master/slave selection)
When controlling the group, some functions excluding basic operation setting, fan level Min/Mid/Max, remote controller
lock setting and time setting may be limited.
GND
Signal wire
12V
GND
Signal wire
12V
B Y R
MASTER
B Y R
SLAVE
When controlling in groups, set the master/slaver of the remote controller. Refer to Installer setting section on how to set master/slave for more detail.
- 45 -
6.9 Timer(On/Off)
6.9.1 On-Timer Operation
When the set time is reached after the time is input by the remote control, the appliance starts to operate.
The timer LED is on when the on-timer is input. It is off when the time set by the timer is reached.
If the appliance is operating at the time set by the timer, the operation continues.
While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the temperature.
- 46 -
move to 'weekly' by
2 Please
repeatedly pressing reservation
button. 'Weekly' blinks at this time.
select weekly reservation or
3 Please
weekly reservation by using
button.
You can setup two reservations,
weekly reservation 1 and weekly
reservation 2, for a day.
move to 'date' setup part by
4 Please
using
button. If 'date'
indication blinks, please setup date.
You can setup date from Monday to
Sunday.
move to 'AM/PM' setup part
5 Please
of turning on by using
button.
- 47 -
button.
button
11
Reservation
number
Turning on time
- 48 -
pressing
button long for 3 seconds, it enters into
1 Ifremote
controller setter setup mode.
- If pressing once shortly, it enters into user setup mode.
Please press more than 3 seconds for sure.
Function Code
4 Press
Thermistor setting
button to save.
<Thermistor Table>
Temperature sensor selection
Function
01
Remote controller
02
Indoor unit
03
Cooling
Heating
2TH
h The function of 2TH has different operation characteristics according to the product.
- 49 -
Outdoor pipe
T2C
T1C
Outdoor
Fan Speed
Setting Speed
Off
Setting
Speed
Off
Setting
Speed
- 50 -
Ascend
Descend
As for operation of Remote Controller, use it by directing the transmitter part of Remote Controller to the receiver part of front panel
directly under front panel.
Do not drop it down or into water. Or else there is worry about
trouble failure.
Do not press hard the Remote Controller button with nail (ballpoint pen or other sharp substance). Or else there is worry
about trouble failure.
In case when obstacle such as curtain hides the signal reception
part of receiver in between the space interval, Remote Controller
operation is infeasible.
- 51 -
Always stop the air conditioner operation for safety before operating lift grill.
Take heed _ there is worry about dust fall etc. when suction grill descends.
In case when the set automatic stop distance goes wrong, check the set value of operation panel and confirm if there is neither obstacle nor mankind.
When you are not to remove obstacle, stop the operation before touching the obstacle.
Medium
High
(Height: 3~4 m)
Automatic stop distance 1.50.5m 2.50.5m 3.50.5m
Ceiling height
Low
- 52 -
3. Basic Control
1. Normal operation..............................................................................................................54
2 Compressor control .........................................................................................................54
3. EEV( Electronic Expansion Valve) control ....................................................................54
- 53 -
1. Normal operation
Basic principle is to control the rpm of the motor by changing the working frequency of the compressor.
Three phase voltage is supplied to the motor and the time for which the voltage will supplied is controlled by IPM
(intelligent power module).
Switching speed of IPM defines the variable frequency input to the motor.
Actuator
Compressor
Fan
EEV
Cooling operation
Fuzzy control
Fuzzy control
Super heating
fuzzy control
Heating operation
Fuzzy control
Fuzzy control
Stop state
Stop
Stop
Min. Pulse
2. Compressor control
System capacity
Fuzzy control : Maintain evaporating temperature (Te) to be constant on cooling mode and constant condensing temperature (Tc) on heating mode by fuzzy control to ensure the stable system performance.
Linear control
- 54 -
4. Trouble Shooting
4. Trouble Shooting
1. Self-diagnosis Function.................................................................................................56
1.1 Error Indicator (Indoor)................................................................................................56
1.2 Error Indicator (Outdoor) .............................................................................................57
2. Pump Down.....................................................................................................................58
3. Evacuation ......................................................................................................................59
4. Gas Charging ..................................................................................................................60
5. Cycle Part ........................................................................................................................61
6. Electronic Parts ..............................................................................................................62
6.1 The Product does'n t operate at all .............................................................................62
6.2 The Product doesn't operate with the remote controller .............................................63
6.3 The Compressor/Outdoor Fan are don't operate ........................................................64
6.4 When indoor Fan does not operate.............................................................................65
6.5 When the louver does not operate. .............................................................................66
6.6 Troubleshooting Indoor Error .....................................................................................67
6.7 Troubleshooting Outdoor Error ..................................................................................73
- 55 -
4. Trouble Shooting
1. Self-diagnosis Function
1.1 Error Indicator (Indoor)
Ceiling Cassette Type Display
10 degrees 1 degrees
The number of times to blink = Error code
Error Indicator
The function is to self-diagnoisis airconditioner and express the troubles identifically if there is any trouble.
Error mark is ON/OFF for the operation LED of evaporator body in the same manner as the following table.
If more than two troubles occur simultaneously, primarily the highest trouble fo error code is expressed.
After error occurrence, if error is released, error LED is also released simultaneously.
To operate again on the occurrence of error code, be sure to turn off the power and then turn on.
Having or not of error code is different from Model.
Indoor Error
Code
Title
Cause of Error
Drain pump
10
- 56 -
4. Trouble Shooting
2 Times
2 Times
2 Times
Outdoor Error
Ex) Error 21 (DC Peack)
LED01G
(RED)
1 Sec.
1 Sec.
1 Time
1 Sec.
1 Time
1 Time
LED02G
(GREEN)
2 Sec.
2 Sec.
UU18W/24W/30W
UU36W/42W/48W/60W
UU37W/43W/49W/61W
Error Display
Code
Contents
Operation
State
21
22
Stop
Stop
23
24
Error Display
Outdoor Device
Count
Cable
Remote
Green
Controller Red LED
LED
Flashing 2 Flashing 1 10 time
CH21
time
Within 1h
times
Code
Contents
Operation
State
Outdoor Device
Count
Cable
Remote
Green
Controller Red LED
LED
Flashing 4 Flashing 5 1 time
CH45
times
Within 1h
times
45
Stop
CH22
Flashing 2 Flashing 2
times
times
Infinite
restart
46
Stop
CH46
Stop
CH23
Flashing 2 Flashing 3
times
times
Infinite
restart
47
Stop
CH47
Stop
CH24
Flashing 2 Flashing 4
times
times
Infinite
restart
51
Over-Capacity Connection
Error
Stop
CH51
25
Stop
CH25
53
Stop
CH53
26
Stop
CH26
54
Stop
CH54
27
Stop
CH27
60
Stop
CH60
Flashing 6
times
29
Stop
CH29
61
Stop
CH61
Flashing 6 Flashing 1
times
time
Infinite
restart
32
Stop
CH32
Flashing 2 Flashing 2
times
times
Infinite
restart
62
Stop
CH62
Flashing 6 Flashing 2
times
times
Infinite
restart
33
Stop
CH33
Flashing 3 Flashing 3
times
times
Infinite
restart
65
Stop
CH65
41
Stop
CH41
67
Stop
CH67
73
Stop
CH73
43
Stop
CH43
44
Stop
CH44
- 57 -
1 time
Within 1h
4. Trouble Shooting
2. Pump Down
Setting Procedure
1) Set the Dip Switch as follow after shutting the power source down.
UU18W
UU24W
UU30W
UU36W
UU42W
UU48W
UU60W
UU37W
UU43W
UU49W
UU61W
WARNING:
When the green LED of PCB is on, compressor is going to be off because of low pressure.
You should return the Dip Switch to operate normally after finishing the operation.
Improper Pump down will lead to product turn off along with LED (green &red) off with in 20 minutes from the initial start.
Power off
(Red LED Off, Green LED On)
- 58 -
4. Trouble Shooting
Indoor unit
Outdoor unit
3-Way
valve
Open
Gas side
3-Way
valve
Open
Vacuum pump
Vacuum
Gage
Lo
OPEN
OPEN
Procedure
(1) Connect the vacuum pump to the center hose
of charge set center hose
(2) Evacuation for approximately one hour.
Confirm that the gauge needle has moved
toward 0.8Torr.
WARNING
- 59 -
4. Trouble Shooting
Indoor unit
3-Way
valve
Open
Outdoor unit
Gas side
Open
3-Way
valve
Check valve
Charging
cylinder
Lo
(1)
OPEN
Vacuum
Gage
Procedure
(1) Connect the charge hose to the charging
cylinder.
Connect the charge hose which you dis-connected from the vacuum pump to the valve at
the bottom of the cylinder.
If you are using a gas cylinder, also use a
scale and reverse the cylinder so that the system can be charged with liquid.
(2) Purge the air from the charge hose.
Open the valve at the bottom of the cylinder
and press the check valve on the charge set to
purge the air. (Be careful of the liquid refrigerant). The procedure is the same if using a gas
cylinder.
(3) Open the valve (Lo side on the charge set and
charge the system with liquid refrigerant.
If the system can not be charged with the specified amount of refrigerant, it can be charged
with a little at a time (approximately 150g each
time) while operating the air conditioner in the
cooling cycle; however, one time is not sufficient, wait approximately 1 minute and then
repeat the procedure (pumping down-pin).
WARNING
When installing or relocation the unit, make sure
that no substance other than the specified refrigerant(R410A) enter the refrigerant circult.
- Any presence of foreign substance such as air
can cause an abnormal pressure rise and may
result in explosion or injury.
- 60 -
4. Trouble Shooting
5. Cycle Part
Trouble analysis
1. Check temperature difference between intake and discharge air, and check for the operating current too.
Case
Symptom
Supposed Caused
Case 1
Case 2
Case 3
Case 4
Normal
NOTICE
Temperature difference between intake and discharge air depends on room air humidity. When the room air humidity is
relativery higher, temperature difference is smaller. When the room air humidity is relatively lower temperature difference
is larger.
2. Check temperature and pressure of refrigeration cycle in cooling mode.
Suction pressure
(Compared with
the normal value)
Temperature of
Discharge Air (Compared
with the normal valve)
Cause of Trouble
High
Defective compressor
Defective 4-way reverse valve
Current is low.
Excessive amount of
refrigerant
Insufficient amount of
refrigerant (Leakage)
Clogging
Current is low.
Higher
Normal
Lower
Higher
Description
NOTICE
1. The suction pressure is usually 8.5~9.5kg/cm2G(Cooling) at normal condition.(R410A)
2. The temperature can be measured by attaching the thermometer to the low pressure tubing and wrap it with putty.
- 61 -
4. Trouble Shooting
6. Electronic Parts
6.1 The Product doesnt operate at all
Turn off the main power and
wait for 10 seconds.
Yes
No
Specification
Remedy
1) AC230V 30V
: Check the rated voltage
2) 12V 3V
2) Replace
PCB Assembly
4) IC04D(7805)
4) DC5V
5) IC01A(KIA7036)
- 62 -
4. Trouble Shooting
No
* Refer to 10.1
Yes
Is it possible to turn on the unit
by ON/OFF button on display?
No
Yes
No
Yes
- 63 -
4. Trouble Shooting
Operate Cooling Mode by setting the disired temperature of the remote controller is less
than one of the Indoor temperature by 1C at least.
Check the sensor for Indoor temperature is attatched as close as to be effected by the
themperature of Heat Exchange (EVA.)
When the sensor circuit for Indoor temperature and connector are in bad connection or are
not engaged, Compressor/Outdoor fan is stopped.
Check the related circuit of R02H(12.1K), R01H(1K), R04H(6.2K), R03H(1K), C01H(102),
C02H(102), Micom(pin No. , ).
Check the Indoor temperature sensor is disconnected or not (about 10K at 25C).
Comp. ON
Comp. OFF
DC 5V
DC 0V
DC 1V
DC 12V
- 64 -
4. Trouble Shooting
Check SSR
- 65 -
4. Trouble Shooting
Confirm that the vertical louver is normally geared with the shaft of Stepping Motor.
If the regular torque is detected when rotating the vertical louver with hands Normal
- 66 -
4. Trouble Shooting
&SSPS/P
&SSPS5ZQF
&SSPS1PJOU
.BJO3FBTPOT
*OEPPSVOJUBJSTFOTPSFSSPS
*OEPPSVOJUTFOTPSJTPQFO *OEPPSVOJU1$#XSPOHDPOOFDUJPO
*OEPPSVOJUQJQFJOMFUTFOTPSFSSPS
*OEPPSVOJU1$#GBJMVSF
TIPSU
4FOTPSQSPCMFN NBJOSFBTPO
*OEPPSVOJUQJQFPVUMFUTFOTPSFSSPS
&SSPSEJBHOPTJTBOEDPVOUFSNFBTVSFGMPXDIBSU
Is sensor properly
connected to PCB?
No
Connect properly to PCB
Yes
Is the resistance value
of sensor normal?*
No
Change the sensor
Yes
Change the PCB
** In case the value is more than 100k (open) or less than 100 (short), Error occurs
Refer: Resistance value maybe change according to temperature of temp sensor,
It shows according to criteria of current temperature(5% margin) Normal
Air temp sensor: 10C = 20.7k : 25C= 10k : 50C= 3.4k
Pipe temp sensor: 10C = 10k : 25C= 5k : 50C= 1.8k
- 67 -
4. Trouble Shooting
&SSPS/P
&SSPS5ZQF
/PDPNNVOJDBUJPOCFUXFFODBCMFE
SFNPUFDPOUSPMMFSJOEPPSVOJU
&SSPS1PJOU
5IFSFNPUFDPOUSPMMFS
EJEOPUSFDFJWFUIF
TJHOBMGSPNJOEPPSVOJU
EVSJOHTQFDJGJDUJNF
.BJO3FBTPOT
3FNPUFDPOUSPMMFSGBVMU
*OEPPSVOJU1$#GBVMU
$POOFDUPSGBVMU
8SPOHDPOOFDUJPO
$PNNVOJDBUJPODBCMFQSPCMFN
&SSPSEJBHOPTJTBOEDPVOUFSNFBTVSFGMPXDIBSU
Does the error happens
again if the remote
controller is replaced?*
No
Yes
No
Yes
* If there is no remote controller to replace : Use another units remote controller doing well
** Check cable : Contact failure of connected portion or extension of cable are main cause
Check any surrounded noise ( check the distance with main power cable)
make safe distance from the devices generate electromagnetic wave
*** After replacing indoor unit PCB, do Auto Addressing & input units address if connected to central controller.
(All the indoor units connected should be turned on before Auto Addressing
- 68 -
4. Trouble Shooting
&SSPS/P
&SSPS5ZQF
%SBJOQVNQFSSPS
&SSPS1PJOU
.BJO3FBTPOT
'MPBUTXJUDIJTPQFOEVFUP
SJTJOHPGDPOEFOTBUFXBUFS %SBJOQVNQGMPBUTXJUDIGBVMU
MFWFMCFDBVTFPGESBJO *NQSPQFSESBJOQJQFMPDBUJPO
DMPHHJOH
PGESBJOQJQF
QVNQGBVMUPSESBJOQJQF
*OEPPSVOJU1$#GBVMU
DMPHHJOH
&SSPSEJBHOPTJTBOEDPVOUFSNFBTVSFGMPXDIBSU
No
No
Yes
Yes
No
Yes
No
Yes
Replace Drain Pump
No
Checking float
switch
Yes
(Low position
short
0 ohm )
(High position
Open)
float
Condensate water
- 69 -
4. Trouble Shooting
float
MAX 450
- 70 -
4. Trouble Shooting
&SSPS/P
&SSPS5ZQF
&SSPS1PJOU
*OEPPSVOJU&&130.FSSPS
&SSPSPDDVSJO
&&130.
PGUIF*OEPPS1$#
.BJO3FBTPOT
&SSPSEFWFMPQFEJODPNNVOJDBUJPO
CFUXFFOUIFNJDSPQSPDFTTPSBOEUIF
&&130.POUIFTVSGBDFPGUIF1$#
&3303EVFUPUIF&&130.EBNBHF
&SSPSEJBHOPTJTBOEDPVOUFSNFBTVSFGMPXDIBSU
3FQMBDFUIFJOEPPSVOJU1$#
BOEUIFONBLFTVSFUPQFSGPSN"VUPBEESFTTJOHBOEJOQVUUIFBEESFTTPG
DFOUSBMDPOUSPM
- 71 -
4. Trouble Shooting
&SSPS/P
&SSPS5ZQF
*OEPPSVOJU#-%$GBONPUPSGBJMVSF
&SSPS1PJOU
.BJO3FBTPOT
*OEPPS#-%$GBONPUPS .PUPSDPOOFDUPSDPOOFDUJPOGBVMU
GFFECBDLTJHOBMJTBCTFOU *OEPPS1$#GBVMU
GPSTFD
.PUPSGBVMU
&SSPSEJBHOPTJTBOEDPVOUFSNFBTVSFGMPXDIBSU
Is connector
connection proper?
No
Connect properly
Yes
No
Is fan motor
normal?*
Yes
* It is normal when check hall sensor of indoor fan motor as shown below
Each termainl with the tester
Tester
4 5 6 7
Normal resistance(10%)
hundreds k
hundreds kk
hundreds k
hundreds k
TH chassis
TD chassis
** Replace the indoor unit PCB, and then make sure to do Auto addressing and input the
address of central control
(Notice: The connection of motor connector to PCB should be done under no power
supplying to PCB)
- 72 -
4. Trouble Shooting
Items
Purpose
Contents
Protection of the IPM parts and compressor in the PCB assembly from
over-current.
Others
- 73 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input
voltage
Checking
power
connection
state
4JOHMFQPXFSTPVSDF$IFDLJOHXIFUIFSUIFQPXFSJT"$_7
QIBTFQPXFSTPVSDF$IFDLXIFUIFSUIFMJOFWPMUBHFJT"$_7
Checking for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
outdoor
fan operating
condition
3FGFSUPQBHF
Checking
refrigerant
for over/short
Checking
sensor fault
$IFDLUIFNBOJGPMEHBVHFQSFTTVSF
Checking
compressor
Checking
PCBA
Checking
Compressor
wiring
Checking
IPM
connection
state
Checking EEV
for motion
3FGFSUPQBHF
3FGFSUPQBHF
Checking
4-way valve
3FGFSUPQBHF
Checking
Compressor
phase
resistance
Checking
compressor
Insulation
resistance
3FGFSUPQBHF
3FGFSUPQBHF
Checking
single
unit of IPM
Checking
Compressor
current
detection circuit
Checking DC
link voltage
3FGFSUPQBHF
3FGFSUPQBHF
$IFDLJOHTDSFXT 3FGFSUPQBHF
GPSOPDPOOFDUJPOPS
VOGBTUFOJOH
Checking
pipes
For bending /
blocking
- 74 -
4. Trouble Shooting
$IFDLJOHPVUEPPSEFWJDFTGPSTIJFMEJOH
Cause of
Trouble
Condition
Blocking of the front part of
outdoor devices
Whirlwind
Shielding
Corrosion
- 75 -
4. Trouble Shooting
(FOFSBUJPOPGSFGSJHFSBOUGMPXEJTUVSCBODF
Cause of
Trouble
Condition
Generation
of refrigerant Bending/Blocking of a pipe
flow distur- EEV fault Closing of SVC Valve
bance
Bending/Blocking of a pipe
OPEN
Bending of a pipe
Check pipes
Replacing a part of or
the entire pipes
SVC Valve
Check
EEV Check
Replacing EEV
- 76 -
&&7$IFDLJOH.FUIPE
$IFDLUIFPQFOJOHDMPTJOH
TPVOEPG&&7XIFOUIFQPXFS
JTBQQMJFEGPSUIFGJSTUUJNF
4. Trouble Shooting
$IFDLJOHDPNQSFTTPSQIBTFSFTJTUBODF
+VEHNFOUPGUIFGBVMUPGUIF
DPNQSFTTPS
1VSQPTF
*UFNTGPSDIFDLJOH
.FBTVSFNFOUPGJOTVMBUJPOSFTJTUBODF
CFUXFFOUIFDPNQSFTTPSBOEQBOFM
.FBTVSFNFOUPGQIBTFSFTJTUBODF
8JSJOH$IFDL
How to check the insulation resistance between the compressor and panel
Compressor
terminals
.FBTVSFUIFSFTJTUBODFCFUXFFOBDPNQSFTTPSUFSNJOBM
BOEQBOFM
Insulation
Terminal
Comp
Pipe
Resistance
U-panel
10M
C/BoxSash
V-panel
10M
W-panel
10M
5VSOUIFTXJUDIPGUIFUFTUFSUP3FTJTUBODFNPEFBOEDIFDLUIFSFTJTUBODF
.FBTVSFUIFSFTJTUBODFCFUXFFOUIFUFSNJOBMT
NFBOTUIFTIPSUPGDPNQSFTTPSQIBTF 3FQMBDFUIFDPNQSFTTPS
3FGFSUPUIFDPNQSFTTPSSFTJTUBODFTUBOEBSET
*GBOZEJTPSEFSJTGPVOE
NFBTVSFUIFMJOFSFTJTUBODFCFUXFFOUIFUFSNJOBMTPGUIFDPNQSFTTPSBTTIPXO
CFMPX
*GUIFDPNQSFTTPSJTGPVOEUPCFOPSNBM
BOZDPNQSFTTPSDPOOFDUJPOXJSFNBZIBWFBGBVMU
Compressor
terminals
Model
- 77 -
4. Trouble Shooting
1VSQPTF
+VEHNFOUPGUIFGBVMUPGUIF
DPNQSFTTPS
*UFNTGPSDIFDLJOH
.FBTVSFNFOUPGJOTVMBUJPOSFTJTUBODF
CFUXFFOUIFDPNQSFTTPSBOEQBOFM
.FBTVSFNFOUPGQIBTFSFTJTUBODF
8JSJOH$IFDL
V (Blue)
: :FMMPX
# #MVF
3 3FE
W
(Yellow)
: # 3
$IFDLXIFUIFSUIF1$#
XJSFTBOEDPNQSFTTPSXJSFT
BSFDPOOFDUFEJOUIFTBNF
DPMPST
$IFDLXIFUIFSUIFDPNQSFTTPS
XJSFTBSFQSPQFSMZDPOOFDUFE
XJUI6
7
BOE8
U
(Red)
5IFXJSJOHEJSFDUJPOJT$$8
DPVOUFSDMPDLXJTF
<1JDUVSFPGOPSNBMDPNQSFTTPSXJSJOH>
- 78 -
4. Trouble Shooting
*1.$IFDL
1VSQPTF
+VEHNFOUPGUIF*1.QBSUGBVMUPG
1$#BTTFNCMZ
*UFNTGPSDIFDLJOH
+VEHNFOUPGEBNBHFPG*(#5
$IFDLJOHUIFTPMEFSJOHTUBUF
4FUUIF.VMUJ5FTUFSBT%JPEF7PMUBHF.FBTVSFNFOU.PEF
.FBTVSFUIFWPMUBHFTPG1_61_71_8BTTIPXOJO'JH
.FBTVSFUIFWPMUBHFTPG6_/V7_/W8_/XBTTIPXOJO'JH
*GUIFNFBTVSFNFOUTBSFTJHOJGJDBOUMZEJGGFSFOUGSPNUIFMFWFMTTIPXOJOUIFGJHVSFT
UIF*1.JTEFFNFEUP
CFEBNBHFE
<'JH>
Sequence of
Measurement
Measurement
1
P-U
<'JH>
Normal
Standards
0.4V~0.6V
Sequence of
Measurement
Measurement
1
U-Nu
Normal
Standards
0.4V~0.6V
P-V
0.4V~0.6V
V-Nv
0.4V~0.6V
P-W
0.4V~0.6V
W-Nw
0.4V~0.6V
- 79 -
4. Trouble Shooting
1VSQPTF
+VEHNFOUPGUIF*1.QBSUGBVMUPG
1$#BTTFNCMZ
Step
*UFNTGPSDIFDLJOH
+VEHNFOUPGEBNBHFPG*(#5
$IFDLJOHUIFTPMEFSJOHTUBUF
Flow of Inspection
Turn the power off (wait until the outdoor device LED is turned off)
P U V W
N N N
u v w
2/2.5kW
<*1.1JO"SSBOHFNFOUBOE1JO/VNCFST>
- 80 -
4. Trouble Shooting
P W V U
N N N
w v u
4kW
<*1.1JO"SSBOHFNFOUBOE1JO/VNCFST>
N
w
N
v
N
u
5kW
<*1.1JO"SSBOHFNFOUBOE1JO/VNCFST>
- 81 -
4. Trouble Shooting
N
w
N
v
N
u
6kW
<*1.1JO"SSBOHFNFOUBOE1JO/VNCFST>
N
u
N
v
N
w
7kW
<*1.1JO"SSBOHFNFOUBOE1JO/VNCFST>
- 82 -
4. Trouble Shooting
$PNQSFTTPS1IBTF$VSSFOU%FUFDUJPO$JSDVJU
1VSQPTF
+VEHNFOUPGUIF*1.QBSUGBVMUPG
1$#BTTFNCMZ
*UFNTGPSDIFDLJOH
$IFDLJOHGPSDVSSFOUEFUFDUJPOFSSPS
4FUUIFUFTUFSJO%$7PMUBHF.PEFBOEDIFDLUIF7PMUBHF
.FBTVSFUIFWPMUBHFJOUIFPSEFSPG6(/%7(/%8(/%
5IFTUBOEBSEPGOPSNBMWPMUBHFNFBTVSFNFOUJT77
*GUIFNFBTVSFNFOUJTEJGGFSFOUGSPNUIFTUBOEBSE
SFQMBDF1$#"
$IFDLJOHNFUIPE
Apply the electricity.
Measure voltage.
1PJOUFBDI1$#"
SFGFSUPUIFOFYUQBHF
:FT
/P
Current detection
part is normal.
Replace PCBA.
1$#"1$#"TTFNCMZ
$BVUJPO8IFOUIFNFBTVSFNFOUJTNBEFJOUIFTUBUFUIBUUIFFMFDUSJDJUZJTBQQMJFE
DIFDLUIFUFTUFS
GPSCFJOHJOUIFNFBTVSFNFOUNPEFBOECFDBSFGVMUPBWPJEQPTTJCMFTIPSUPGUIFQBSUTPUIFS
UIBOUIFNFBTVSJOHQBSU
Copyright 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 83 -
4. Trouble Shooting
Comp Current
2/2.5kW
GND
4kW
Comp U
GND
- 84 -
4. Trouble Shooting
5kW
GND
V
6kW
W V
- 85 -
GND
4. Trouble Shooting
7kW
V U W
GND
- 86 -
4. Trouble Shooting
8BZ7BMWF$IFDL
1VSQPTF
+VEHFXIFUIFSUIFXBZWBMWFQBSU *UFNTGPSDIFDLJOH
IBTBOZGBVMU
$IFDLUIFXPSLJOHWPMUBHFPGUIFXBZ
WBMWF
$IFDLUIFXBZWBMWFDPJMSFTJTUBODF
$BVUJPO8IFOUIFNFBTVSFNFOUJTNBEFJOUIFTUBUFUIBUUIFFMFDUSJDJUZJTBQQMJFE
DIFDLUIFUFTUFS
GPSCFJOHJOUIFNFBTVSFNFOUNPEFBOECFDBSFGVMUPBWPJEQPTTJCMFTIPSUPGUIFQBSUTPUIFS
UIBOUIFNFBTVSJOHQBSU
- 87 -
4. Trouble Shooting
4Way Check
CN-4Way
2/2.5kW
CN-4Way
4kW
- 88 -
4. Trouble Shooting
5kW
CN-4Way
6kW
- 89 -
4. Trouble Shooting
CN-4Way
7kW
.BJO1$#"
- 90 -
4. Trouble Shooting
LGMV Display
8IFO)FBUJOH
-&%UVSOPO
8IFO$PPMJOH
-&%UVSOPGG
- 91 -
4. Trouble Shooting
&&7$IFDL
1VSQPTF
+VEHJOH&&7QBSUGBVMU
*UFNTGPSDIFDLJOH .FBTVSF&&7SFTJTUBODF
<5BCMF>
1 2 3 4 5 6
Measurement Pin
Normal Standard
1-3
455
1-4
455
1-5
455
1-6
455
1JOUZQF
RD
BL ORYL WH
[Pin No.]
<5BCMF>
1 2 3 4 5 6
Measurement Pin
Normal Standard
1-4
455
1-6
455
2-3
455
2-5
455
1JOUZQF
RDBRBL ORYL WH
[Pin No.]
5IFSFNBZCFUIFEJGGFSFODFJOUIFSFTJTUBODF
EFQFOEJOHVQPOUIF&&74QFDJGJDBUJPOT
- 92 -
4. Trouble Shooting
%$-JOL%FUFDUJPO$JSDVJU
1VSQPTF
(FOFSBUJPOPGBOFSSPSDBVTFECZ%$ *UFNTGPSDIFDLJOH
$IFDLJOH%$MJOLWPMUBHFEFUFDUJPOFSSPS
MJOLWPMUBHFEFUFDUJPOFSSPS
4FUUIFUFTUFSJO%$7PMUBHF.PEFBOEDIFDLUIFDVSSFOU
$IFDLJOHUIFWPMUBHFCFUXFFO%$-BOE.JDPN@(/%
5IFTUBOEBSEPGOPSNBMWPMUBHFNFBTVSFNFOUJT_7
*GUIFNFBTVSFNFOUJTEJGGFSFOUGSPNUIFTUBOEBSE
SFQMBDF1$#"
$IFDLJOHNFUIPE
Apply the electricity.
Measure voltage.
Within 2.3~2.7V
:FT
/P
Current detection
part is normal.
Replace PCBA.
1$#"1$#"TTFNCMZ
$BVUJPO8IFOUIFNFBTVSFNFOUJTNBEFJOUIFTUBUFUIBUUIFFMFDUSJDJUZJTBQQMJFE
DIFDLUIFUFTUFS
GPSCFJOHJOUIFNFBTVSFNFOUNPEFBOECFDBSFGVMUPBWPJEQPTTJCMFTIPSUPGUIFQBSUTPUIFS
UIBOUIFNFBTVSJOHQBSU
- 93 -
4. Trouble Shooting
DC_ Link
2/2.5kW
GND
4kW
DC_ Link
GND
- 94 -
4. Trouble Shooting
GND
5kW
DC_LINK
6kW
DC_LINK
- 95 -
GND
4. Trouble Shooting
7kW
DC LINK-Voltage _ INV
GND
- 96 -
4. Trouble Shooting
%$-JOL/(7PMUBHFMFWFM
Controller
Voltage
2~6kW
140V
7kW
380V
- 97 -
4. Trouble Shooting
Items
Purpose
Contents
Prevention of the damage of PCBA, wire, and connector caused by
over-current
- 98 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
Checking
power
connection
state
$IFDLGPS"$_7
Checking
for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
outdoor
fan operation
3FGFSUPQBHF
Checking
pipes
for Bending /
blocking
Checking EEV
for motion
3FGFSUPQBHF
3FGFSUPQBHF
Checking
refrigerant
for over/shorts
$IFDLUIFNBOJGPMEHBVHFQSFTTVSF
Checking
compressor
Checking
PCBA
Checking
compressor
wiring
Checking
compressor
phase resistance
Checking
compressor
insulation
resistance
3FGFSUPQBHF
3FGFSUPQBHF
Checking input
current
detection
circuit
3FGFSUPQBHF
- 99 -
4. Trouble Shooting
*OQVU$VSSFOU%FUFDUJPO$JSDVJU
1VSQPTF
(FOFSBUJPOPGPWFSDVSSFOUDBVTFECZ *UFNTGPSDIFDLJOH
$IFDLJOHGPSDVSSFOUEFUFDUJPOFSSPS
JOQVUDVSSFOUEFUFDUJPOFSSPS
4FUUIFUFTUFSJO%$7PMUBHF.PEFBOEDIFDLUIFDVSSFOU
$IFDLUIFDVSSFOUCFUXFFO*/*BOE.JDPN@(/%
5IFTUBOEBSEPGOPSNBMWPMUBHFNFBTVSFNFOUJT77
*GUIFNFBTVSFNFOUJTEJGGFSFOUGSPNUIFTUBOEBSE
SFQMBDF1$#"
$IFDLJOHNFUIPE
Apply the electricity.
Measure voltage.
Within 2.3~2.7V
:FT
/P
Current detection
part is normal.
Replace PCBA.
1$#"1$#"TTFNCMZ
$BVUJPO8IFOUIFNFBTVSFNFOUJTNBEFJOUIFTUBUFUIBUUIFFMFDUSJDJUZJTBQQMJFE
DIFDLUIFUFTUFS
GPSCFJOHJOUIFNFBTVSFNFOUNPEFBOECFDBSFGVMUPBWPJEQPTTJCMFTIPSUPGUIFQBSUTPUIFS
UIBOUIFNFBTVSJOHQBSU
- 100 -
4. Trouble Shooting
Input_I
2/2.5kW
GND
4kW
I_CT
GND
- 101 -
4. Trouble Shooting
5kW
GND
CT_INV
6kW
INPUT(CT)
- 102 -
GND
4. Trouble Shooting
4kW
Input_Current_T_PFC
Input_Current_R_PFC
7kW
GND
DC LINK-Voltage _ INV
GND
- 103 -
4. Trouble Shooting
LGMV Display
$)FSSPSDPOEJUJPO
Controller
Current Level
2kW
9A
2.5kW
11A
4kW
19A
5kW
29A
6kW
29A
7kW
13A
- 104 -
4. Trouble Shooting
Items
Contents
Purpose
Condition for Generation Detected DC Link Voltage is less than the standard.
Expected
Causes
Installation
PCB
Assembly
- 105 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
Checking
power
connection
state
$IFDLGPS"$_7
Installation
Checking Bridge
Diode
(Limited to Multi-V
Model only)
3FGFSUPQBHF
Checking
the wire
coating of
power source
$IFDLUIFXJSFGPSQPTTJCMFDPBUDIPQQJOHBOETIPSU
Checking
PCBA
Checking
compressor
wiring
Checking
compressor
phase resistance
$IFDLUIFSFBDUPS 3FGFSUPQBHF
UFSNJOBMJOTFSUJPO
TUBUF
- 106 -
4. Trouble Shooting
$IFDLJOH3FBDUPS$POOFDUJPO
2/2.5kW
4kW
"$ /
"$ -
5kW
#SPXO8JSFJTDPOOFDUFE"$ -
5FSNJOBM
#MVF8JSFJTDPOOFDUFE"$ /
5FSNJOBM
$/ /
#SPXO8JSFJT
DPOOFDUFE$/ -
5FSNJOBM
#MVF8JSFJT
DPOOFDUFE$/ /
5FSNJOBM
6kW
$/ -
$/- 3
7kW
$/- 4
- 107 -
#SPXO8JSFJT
DPOOFDUFE
$/- 3
5FSNJOBM
#MBDL8JSFJT
DPOOFDUFE
$/- 4
5FSNJOBM
4. Trouble Shooting
1VSQPTF
$IFDLJOH#SJEF%JPEFQBSUTGPSGBVMU
*UFNTGPSDIFDLJOH $IFDLJOH1'$.GPSEBNBHF
4FUUIF.VMUJ5FTUFSBT%JPEF7PMUBHF.FBTVSFNFOU.PEF
.FBTVSFUIFWPMUBHFBTTIPXOJO'JH
.FBTVSFUIFWPMUBHFBTTIPXOJO'JH
*GUIFNFBTVSFNFOUTBSFTJHOJGJDBOUMZEJGGFSFOUGSPNUIFMFWFMTTIPXOJOUIFGJHVSFT
UIF1'$.JTEFFNFE
UPCFEBNBHFE
<'JH>
Sequence of
Measurement
1
2
<'JH>
P-U
Normal
Standards
0.4V~0.6V
Sequence of
Measurement
1
P-V
0.4V~0.6V
Measurement
- 108 -
U-Nu
Normal
Standards
0.4V~0.6V
V-Nv
0.4V~0.6V
Measurement
4. Trouble Shooting
$IFDLJOH1'$. 1$#"L8
1VSQPTF
$IFDLJOH#SJEF%JPEFQBSUTGPSGBVMU
*UFNTGPSDIFDLJOH $IFDLJOH1'$.GPSEBNBHF
4FUUIF.VMUJ5FTUFSBT%JPEF7PMUBHF.FBTVSFNFOU.PEF
.FBTVSFUIFWPMUBHFTPG1_31_41_5BTTIPXOJO'JH
.FBTVSFUIFWPMUBHFTPG5_/V4_/W3_/XBTTIPXOJO'JH
*GUIFNFBTVSFNFOUTBSFTJHOJGJDBOUMZEJGGFSFOUGSPNUIFMFWFMTTIPXOJOUIFGJHVSFT
UIF*1.JTEFFNFEUP
CFEBNBHFE
<'JH>
Sequence of
Measurement
1
<'JH>
P-U
Normal
Standards
0.4V~0.6V
Sequence of
Measurement
1
P-V
0.4V~0.6V
P-W
0.4V~0.6V
Measurement
- 109 -
U-Nu
Normal
Standards
0.4V~0.6V
V-Nv
0.4V~0.6V
W-Nw
0.4V~0.6V
Measurement
4. Trouble Shooting
PFCM Point
PFCM Point
4kW
<1'$.1JO"SSBOHFNFOUBOE1JO/VNCFST>
5kW
<1'$.1JO"SSBOHFNFOUBOE1JO/VNCFST>
- 110 -
4. Trouble Shooting
PFCM Point
6kW
<1'$.1JO"SSBOHFNFOUBOE1JO/VNCFST>
N
W
N
V
N
U
7kW
<1'$.1JO"SSBOHFNFOUBOE1JO/VNCFST>
Copyright 2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
- 111 -
4. Trouble Shooting
Items
Purpose
Contents
Restarting of the compressor when it does not properly work.
IPM parts fault, compressor current detection circuit fault, and DC link
detection circuit fault
Others
- 112 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
Checking
power
connection
state
$IFDLGPS"$_7
Checking
for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
outdoor
fan operation
3FGFSUPQBHF
Checking
pipes
for Bending /
blocking
Checking EEV
for motion
3FGFSUPQBHF
3FGFSUPQBHF
Checking
refrigerant
for over/shorts
.BOJGPMEHBVHF
Checking
compressor
Checking
PCBA
Checking
compressor
wiring
Checking
IPM
connection
state
Checking
compressor
phase resistance
Checking
compressor
insulation
resistance
3FGFSUPQBHF
3FGFSUPQBHF
Checking
single
unit of IPM
Checking
Compressor
current
detection circuit
Checking DC
link voltage
3FGFSUPQBHF
3FGFSUPQBHF
$IFDLJOHTDSFXT 3FGFSUPQBHF
GPSOPDPOOFDUJPOPS
VOGBTUFOJOH
- 113 -
4. Trouble Shooting
Items
Purpose
Contents
Prevention of the damage of PCBA, wire, and connector caused by
over-current
Condition for Generation Transfer of signals with detection of the flow of over-current in PSC/PFC
Installation & Transfer of signals with detection of the flow of over-current in PSC/PFC,
Overload Outdoor device shielding
Open/Short of the coil in the compressor, insulation breaking between
Compressor the coil in the compressor and the sash, damage of compressor with
Expected
abrasion, and compressor connection fault
Causes
PCB
Damage of PSCM/PFCM and input current detection circuit fault
Assembly
Others
Input of abnormal power, power connection fault, reactor terminal connection fault, and faulty distance between heatsink and sash
- 114 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
Checking
power
connection
state
$IFDLGPS"$_7
Checking
for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
reactor
Terminal
connection
$IFDLUIFSFBDUPSUFSNJOBMJOTFSUJPOTUBUF
Checking
outdoor
fan operation
3FGFSUPQBHF
Checking
pipes
for Bending /
blocking
Checking EEV
for motion
3FGFSUPQBHF
3FGFSUPQBHF
Checking
refrigerant
for over/shorts
.BOJGPMEHBVHF
Checking
compressor
Checking
PCBA
Checking
compressor
wiring
Distance
between
heatsink and
panel
/PUMFTTUIBO
NNPGEJTUBODF
Checking
compressor
phase
resistance
Checking
compressor
insulation
resistance
3FGFSUPQBHF
3FGFSUPQBHF
Checking input
current detection
circuit
3FGFSUPQBHF
- 115 -
4. Trouble Shooting
Items
Purpose
Contents
Protection of IPM and compressor in the PCB assembly from overcurrent.
- 116 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
Checking
power
connection
state
$IFDLGPS"$_7
Checking
for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
outdoor
fan operation
3FGFSUPQBHF
Checking
pipes
for Bending /
blocking
Checking EEV
for motion
3FGFSUPQBHF
3FGFSUPQBHF
Checking
refrigerant
for over/shorts
.BOJGPMEHBVHF
Checking
compressor
Checking
PCBA
Checking
compressor
wiring
Checking
IPM
connection
state
Checking
compressor
phase
resistance
Checking
compressor
insulation
resistance
3FGFSUPQBHF
3FGFSUPQBHF
Checking
single
unit of IPM
Checking
Compressor
current
detection circuit
Checking DC
link voltage
3FGFSUPQBHF
3FGFSUPQBHF
$IFDLJOHTDSFXT 3FGFSUPQBHF
GPSOPDPOOFDUJPOPS
VOGBTUFOJOH
- 117 -
4. Trouble Shooting
Items
Purpose
Contents
Possible damage of compressor and piping due to high discharge
temperature
Condition for Generation The discharge temperature is elevated exceeding the standard.
Installation
Overload
Installation fault, closing of SVC valve, under/over charging with refrigerant, and infiltration of moisture into refrigerant
Outdoor device shielding, outdoor fan fault, and EEV valve fault
Expected
Short between compressor coil and sash, abrasion of compressor, and
Causes Compressor short/opening of compressor coil
PCB
Assembly
Sensor
*1. *OUFMMJHFOU1PXFS.PEVMF
5IFQBSUUPDPOUSPMUIFJOWFSUFSDPNQSFTTPS
- 118 -
4. Trouble Shooting
'MPXPGUSPVCMFEJBHOPTJT
Items for
checking
Checking
power source
Sub-items for
checking
Checking
input voltage
$IFDLGPS"$_7
Checking
for
over-load
operation
Checking
outdoor
devices for
shielding
Checking
outdoor
fan operation
3FGFSUPQBHF
Checking pipe
blocking
Checking
the work
of EEV
3FGFSUPQBHF
Checking
under/over
charging
with refrigerant
3FGFSUPNBOJGPMEHBVHF
Checking
compressor
Checking
compressor
wiring
Checking
PCBA
Checking
outset
Temperature
sensor
Checking
compressor
phase
resistance
Checking
compressor
insulation
resistance
3FGFSUPQBHF
- 119 -
4. Trouble Shooting
$IFDLJOH5FNQFSBUVSF4FOTPS0QFO4IPSU
Items
Purpose
Contents
Prevention of reception of wrong temperature value from the temperature sensor
Causes in Detail
Connector open, damaged insulation of sash, damage of the wire coating of temperature sensors
Code No.
Details of Errors
41
43
44
45
46
47
6TFTPGTFOTPST
$POUSPMPGDPNQSFTTPSBOEDZDMF
,JOETPG4FOTPST 4FFDPSSFTQPOEJOHQBHFT
0VUMFU,
1JQJOH,
"JS,
#BTFEPOPGTVSSPVOEJOHUFNQFSBUVSF
4FOTPSJOTVMBUJPOSFTJTUBODF
5IFSFTJTUBODFCFUXFFOUIFTBTIBOETFOTPSUFSNJOBMTIPVMECFOPUMFTTUIBO.
- 120 -
4. Trouble Shooting
4FOTPS$IFDLJOH.FUIPET
1VSQPTF
$IFDLJOHTJOHMFVOJUTPGTFOTPST
GPSGBVMU
*UFNTGPSDIFDLJOH .FBTVSFNFOUPGUIFVOJRVFSFTJTUBODFCZ
TFOTPSUFNQFSBUVSF
Pipe sensor
1PTJUJPO0VUMFUPGDPNQSFTTPS
4FOTPSWBMVFL
#BTFEPO
1PTJUJPO$PNQSFTTPSJOMFUBOEQJQF
4FOTPSWBMVFL
#BTFEPO
Compressor
inlet sensor
200
Pipe sensor
1PTJUJPO3FBSQBSUPGPVUEPPSEFWJDF
4FOTPSWBMVFL
#BTFEPO
10
- 121 -
4. Trouble Shooting
1VSQPTF
$IFDLJOHTJOHMFVOJUTPGTFOTPST
GPSGBVMU
*UFNTGPSDIFDLJOH .FBTVSFNFOUPGUIFVOJRVFSFTJTUBODFCZ
TFOTPSUFNQFSBUVSF
Pressure sensor
1PTJUJPO0VUMFUPGXBZWBMWF CBTFEPODPPMJOHNPEF
Checking start
No
No
Reconnection
Yes
Yes
Voltage of 5V is output
from the PCB?
No
PCB checking and replacement
Yes
No malfunction of the pressure
sensor
&KFDUJPOPGTVC1$#
*OTFSUUIFTVC1$#UPUIF.BJO1$#
- 122 -
4. Trouble Shooting
Items
Contents
Purpose
3FJOTUBMMBUJPOPGQSPEVDUT
*OEPPSEFWJDFTL
Judgment Method
0VUEPPSEFWJDFL
*OEPPSEFWJDFTL
1SPEVDUHVBSBOUFF
1FSDFOUBHFJTEJGGFSFOU
GSPNFBDINPEFM
4FMFDUJPOPGUIFQPTTJCMFDBQBDJUZUPCFDPNCJOFE
XJUIUIFPVUEPPSEFWJDF
LL
Model Name
MU2M15
MU2M17
MU3M19
MU3M21
MU4M25
MU4M27
MU5M30
MU5M40
FM40AH
FM48AH
FM56AH
FM41AH
FM49AH
FM57AH
"Maximum
total capacity"
21
24
30
33
39
41
48
52
52
63
73
54
63
73
0VUEPPS
EFWJDF
DBQBDJUZ
1SPEVDU
HVBSBOUFF
*OEPPSEFWJDFDBQBDJUZ
LLL
5PUBMDBQBDJUZPGJOEPPSEFWJDFT L
FYDFFET
UIFNBYJNVNDPNCJOBUJPODBQBDJUZPGUIF
PVUEPPSEFWJDF L
$) *OEPPS%FWJDF0WFS$POOFDUJPO&SSPS
- 123 -
4. Trouble Shooting
Items
Contents
Purpose
Checking the communication state between Main PCB and Inverter PCB
Resetting
power source
Connector
Insufficient insertion
of housing
Damage of
wire coating
Checking
power source
Damage of
wire coating
*UTIPVMEOPUCFTIPSU
Replacement of
inverter PCB
LED Off
3FGFSUPQBHF
Replacement of
main PCB
- 124 -
4. Trouble Shooting
&OWJSPONFOUJOUFSGFSJOH1$#DPNNVOJDBUJPO
1VSQPTF
*OTUBMMBUJPOFOWJSPONFOUJOUFSGFSJOHUIF *UFNTGPSDIFDLJOH
$IFDLJOHNFUIPEPGGBVMUZQPJOUT
DPNNVOJDBUJPO
OK
NG
Damage of wire coating
: Interference with wires or wire coating damage with chopping
Inverter PCB LED
: Replacement of inverter PCB during LED Off after resetting
- 125 -
4. Trouble Shooting
Items
Purpose
Contents
Checking for smooth data sending/receiving between indoor/outdoor
devices
Items for
checking
Resetting
power source
Sub-items for
checking
Normal
Operation
Insert
Connector
3FGFSUPQBHF
Outdoor PCB
Checking for
LED Off
No power
3FGFSUPQBHF
Installation
Wire
connection
state
Wire tongue
termination
3FGFSUPQBHF
Replacing
indoor
PCB
Communication
cable length
Check LGMV
Communication
rate
3FGFSUPQBHF
Communication
cable length
Grounding
*GMFOHUIJTNPWFS
1MFBTFTFQBSBUFDPNNVOJDBUJPOXJSF
- 126 -
4. Trouble Shooting
$IFDLJOH.FUIPEPG0VUEPPS1$#
1VSQPTF
$IFDLJOHXIFUIFSPVUEPPS1$#JT
OPSNBM
*UFNTGPSDIFDLJOH
$IFDLSFBDUPSDPOOFDUJPOTUBUF
$IFDLGVTFTUBUF
$IFDLXIFUIFSPVUEPPS1$#-&%JTMJHIUFE
Fuse Point
2/2.5kW
4kW
$#PY'VTF
PCBA Fuse
5kW
PCBA Fuse
6kW
$#PY'VTF
PCBA Fuse
7kW
- 127 -
4. Trouble Shooting
*OTUBMMBUJPOFOWJSPONFOUJOUFSGFSJOHXJUIUIFDPNNVOJDBUJPOPG
JOEPPSPVUEPPSEFWJDFT
1VSQPTF
*OTUBMMBUJPOFOWJSPONFOUJOUFSGFSJOHUIF *UFNTGPSDIFDLJOH
$IFDLJOTUBMMBUJPOFSSPSQPJOUT
DPNNVOJDBUJPO
The communication lines of the
indoor /outdoor devices are installed by wire-to-wire ethod.
: In case of additional connection,
connect the wires with soldering
as shown below.
The cut section of the wire passes
the insulation tape and causes a
short with another wire.
Neutral
Wire-to-Wire
NG
NG
OK
Communication noise by oxidized
wire arrangement : Soldering is
required.
Neutral
- 128 -
4. Trouble Shooting
$IFDL7PMUBHF*OQVUPG"$7
*OEPPS
&RVJQNFOU.VMUJ.FUFS
0VUEPPS$PNNVOJDBUJPO
5FTU.PEF"$7PMUBHF
*OEPPS0VUEPPS5FSNJOBMCMPDL
8IFO*OQVU"$7
$IFDL"$7-JWF/FUVSBM
*OEPPS0VUEPPS
0UIFSXJTF
BSSBOHFUIF$PNNVOJDBUJPO8JSF
$IFDL"$7
$IFDL7PMUBHF*OQVUPG"$7
220
L
*%6
5#
0%6
5#
Gnd
*%6
5#
OK
0%6
5#
&RVJQNFOU.VMUJ.FUFS
5FTU.PEF3FTJTUBODF
NG
$IFDLFMFDUSJDTIPSU$PNNVOJDBUJPO-JOFBOE1PXFS-JOF
"GUFS3FNPWJOH1PXFS-JOF8JSFBOE$PNNVOJDBUJPO-JOF8JSF
$IFDLUIFWPMUBHFT
$IFDLSFTJTUBODF$PNNVOJDBUJPO-JWFTIPVMECFJOGJOJUF
$IFDLSFTJTUBODF$PNNVOJDBUJPO/FUVSBMTIPVMECFJOGJOJUF
$IFDLSFTJTUBODF$PNNVOJDBUJPO(OETIPVMECFJOGJOJUF
$IFDL3FTJTUBODF$PNNVOJDBUJPO
-JOFBOE/FVUSBM
L
Gnd
$IFDL3FTJTUBODF$PNNVOJDBUJPO
-JOFBOE-JWF
L
Gnd
- 129 -
4. Trouble Shooting
$IFDLFMFDUSJDMFBLBHF$PNNVOJDBUJPO-JOFBOE1JQF
"GUFS3FNPWJOH1PXFS-JOF8JSFBOE$PNNVOJDBUJPO-JOF8JSF
$IFDLUIFWPMUBHFT
$IFDL*OGJOJUF3FTJTUBODFCFUXFFO1PXFS$PNNVOJDBUJPO-JOFBOE1JQF-JOF
Check Resistance
Check Resistance
Neutral and Pipe
Pipe
Gnd
Gnd
Pipe
Check Resistance
Communication Line and Pipe Pipe
L
Gnd
- 130 -
4. Trouble Shooting
$IFDL-(.7$PNNVOJDBUJPOSBUF
$PNNVOJDBUJPOSBUF /PSNBMMZ
- 131 -
4. Trouble Shooting
)PXUPNFBTVSFGPS&OWJSPONFOU/PJTF
Applied Model : Multi/Single Outdoor PCBA
(Refer to PCB P/no of attached file)
Applied S/No : ~ 301xxxxxx (~ Jan, 2013)
1. Symptom
0VUEPPSVOJUDBOOPUDPNNVOJDBUFXJUI*OEPPSVOJU
0VUEPPSSFTFUUIFOXPSLOPSNBM
*UIBQQFOTJOUFSNJUUFOUMZ
-&%TGPSTIPXJOHQPXFSPOBOEDPNNVOJDBUJPOTUBUVTBSFOPUPOPSOPU
CMJOLJOHJOPVUEPPSJOWFSUFS1$#"
2. Causes
/PJTFEJTUVSCUIFPVUEPPSVOJUDPNNVOJDBUJPOXJUIJOEPPSVOJU
3. Improvement
*OTFSUJOHTNBMMDPOOFDUPSXJUIDBQBDJUPSJO*OWFSUFS1$#"PG0VUEPPS6OJU
$POOFDUPSDBOCFBQQMJFEUPUIFMJTU 1$#"1/P
POUIFOFYUQBHF
(VJEFXIFSFZPVQVUJUPOUIFOFYUQBHF
*UIFMQTPVUEPPSVOJUDPNNVOJDBUFXJUIJOEPPSVOJUCFUUFSUIBOCFGPSFBOESFEVDFUIFOPJTFMFWFM
<$POOFDUPSXJUIDBQBDJUPSJO$/@'MBTI@8SJUFSPS$/@'MBTI>
- 132 -
4. Trouble Shooting
<1IFOPNFOPO>
3FE-&%PGG
3FE-&%UVSOPOCVUOPUCMJOLJOH
<1$#"1/0>
PCBA P/NO
EBR362668**
EBR356522**
EBR481682**
EBR610154**
EBR614818**
EBR633722**
EBR652505**
EBR683491**
EBR723989**
EBR753611**
EBR741383**
- 133 -
4. Trouble Shooting
Items
Purpose
Contents
Prevention of phase unbalance and prevention of reverse rotation of
constant-rate compressor
Installation
Checking N-phase
3FGFSUPQBHF
Fuse damage
(R and S phases)
AC load
Inverter PCB
- 134 -
4. Trouble Shooting
+VEHNFOUNFUIPEPG/QIBTFXJSJOHFSSPS
4FUUIFUFTUFSJO"$WPMUBHFNFBTVSFNFOUNPEF 5IFQBSUIBWJOHXBWFQBUUFSO
380
380
380
220
Vac
Vac
Vac
Vac
N-phase
unavaila
ble
N-phase
unavaila
ble
N-phase
unavaila
ble
N-phase
N-phase
Nphase
availab
le
220
220 N-phase
220
380 N-phase
Vac
Vac
Vac
Vac
Nphase
availa
ble
Nphase
availa
ble
Nphase
availa
ble
- 135 -
N-phase
unavaila
ble
4. Trouble Shooting
+VEHNFOU.FUIPEPG3
4
5QIBTFMPTT
4FUUIFUFTUFSJO"$WPMUBHFNFBTVSFNFOUNPEF 5IFQBSUIBWJOHXBWFQBUUFSO
5IFQBSUUIBUEPFTOPUHFOFSBUFWPMUBHFXBTVQHSBEFE
1PXFSNPEVMFSFRVJSFTDIFDLJOH
??
??
??
Vac
Vac
Vac
+VEHNFOUNFUIPEPGPQFOBOESFWFSTFQIBTFPG3
4
5
0QFSBUJPOXJUISFQMBDFNFOUPG3BOE4QIBTFTPOMZ
- 136 -
4. Trouble Shooting
Contents
Prevention of application of wrong cycle data
Purpose
Condition for Generation
Judgment of the error caused by noise and the fault of EEPROM connection
3FTFUUJOHQPXFSTPVSDF8BJUGPSNJOVUFTBGUFSUVSOJOHUIFQPXFSPGUIFQSPEVDUPGG
Power Source
EEPROM
Replacing PCB
- 137 -
4. Trouble Shooting
EEPROM Position
2/2.5kW
4kW
5kW
6kW
7kW
- 138 -
4. Trouble Shooting
Items
Contents
Purpose
Condition for Generation Shielding environment, cycle disorder, and sensor unit fault
3FTFUUJOHQPXFSTPVSDF8BJUGPSNJOVUFTBGUFSUVSOJOHUIFQPXFSPGUIFQSPEVDUPGG
Installation
Whether to
shield
3FGFSUPQBHF
Cycle
Pipe
blocking
3FGFSUPQBHF
Sensor
Checking service
valve for opening
Checking refrigerant
for leakage or
overcharging
3FGFSUPQBHF
Checking fan
for working
3FGFSUPQBHF
Properties
of unit
3FGFSUPQBHF
Replacing
PCB
- 139 -
4. Trouble Shooting
Items
Contents
Purpose
Condition for Generation Heat sink temperature reaches the limit level.
3FTFUUJOHQPXFSTPVSDF8BJUGPSNJOVUFTBGUFSUVSOJOHUIFQPXFSPGUIFQSPEVDUPGG
Installation
Whether to shield
3FGFSUPQBHF
Outdoor Fan
Restoration of
temperature
Replacing PCB
- 140 -
4. Trouble Shooting
$IFDL-(.7GPS$)
%$-JOL/(7PMUBHFMFWFM
Controller
Current Level
All PCBA
95
7kW
85
- 141 -
4. Trouble Shooting
Items
Contents
Purpose
Working Temperature
Outdoor Temperature
3FGFSUPQBHF
Replacing PCB
- 142 -
4. Trouble Shooting
#14,16
2/2.5kW
#19,20
4kW
#19,20
5kW
#19,20
6kW
7kW
- 143 -
4. Trouble Shooting
Items
Purpose
Contents
Detection of no proper operation of the fan.
Condition for Generation The fan is not operated at the rpm exceeding the standard.
Causes in Detail
Fan motor damage and fan connection fault
Damage of fan motor driving circuit
Outdoor Fan
Connection state
PCBA
Cautions
#PUIUIFGBOBOE1$#NBZCFEBNBHFEXIFOUIFGBODPOOFDUPSJTNPVOUFEPSSFNPWFEJOUIFTUBUFUIBU
UIFQPXFSJTTVQQMJFE
#PUIUIFGBOBOE1$#NBZCFEBNBHFEXIFOUIFGBODPOOFDUPSJTJOTFSUFEJOSFWFSTFEJSFDUJPO
*GGBONPUPSGBVMUJTJEFOUJGJFE
1$#TIPVMECFBMTPSFQMBDFEJODPOTJEFSBUJPOPGQPTTJCMFEBNBHFPG1$#
- 144 -
4. Trouble Shooting
$IFDLJOH5FNQFSBUVSF4FOTPS0QFO4IPSU
$IFDLBMJFOTVCTUBODFJOUIF'BO
$IFDLUIFJNQSJTPONFOUPGGBO1MFBTFUVSO'BO
JGGBOJTUVSO
PL
$IFDLUIFUFSNJOBM
$IFDLUIF.PUPS3FGFSUPUIFCFMPX
(10%)
Tester
Dozens k
Dozens k
~hundreds k ~hundreds k
Dozens k
Dozens k
~hundreds k ~hundreds k
- 145 -
P/NO : MFL67478301
December, 2013