Professional Documents
Culture Documents
2. Click on the set up tab, type in the receiver model name and click apply
3. Unit will shut down and restart, once unit has restarted click get from device and the
receiver name should appear on the serial number box
4. Close Ploader
5. Connect to PCCDU
6. Go to file Manual Mode
7. In the Manual Mode put in the following script to get the receiver id number
%%print,/par/rcv/id
8. Hit send command and you should get the receiver id for the unit
10. If the script goes through you will get a RE002% as a return on the screen disconnect
from the unit.
11. Connect to TRU and go to the information icon and you should see the model number
with the serial number in this screen.