The first option from Clonezilla: Select default menu
Clonezilla live (Default settings, VGA 800x600) Choose language: English (default) en_US.UTF-8 English Configuring console-data: keymap. Select the default option from the menu Don't touch keymap Start Clonezilla: Select the default option from the menu Start_Clonezilla Start Clonezilla Clonezilla: Select the following device-image work with disks or partitions using images Mount Clonezilla image directory: this is the partition where Clonezilla will perform recovery local_dev Use local device (Ex: hard drive, USB drive) Press the "ENTER" key after selection. Clonezilla - Opensource Clone System (OCS) | Mode: Select the following sdb1 3925MB_vfat(In_USB_DISK_)_usbSMI_USB_DISK_AA00000000001154-0:1 Ensure you see the term "sdb1" and "vfat" along with the size if your USB thumbdrive. Clonezilla - Opensource Clone System (OCS) : "/" Select default menu / Top_directory_in_the_local_device Press "Enter" to continue...... Clonezilla - Opensource Clone System (OCS) : Select default menu Beginner Beginner mode: Accept the default options Clonezilla: Select mode: Select the following restoredisk Restore_an_image_to_local_disk Clonezilla - Opensource Clone System (OCS) | Mode: restoredisk Clonezilla - Opensource Clone System (OCS) | Mode: restoredisk : Select the destination partition sda 4096MB_4GB_NANDrive__ata4GB_NANDrive_0000000000R1Y19998XU < Press "Enter" to continue...... > Press the "ENTER" key < Are you sure you want to continue? ? > press the Y key < Let me ask you again, Are you sure you want to continue? ? > confirm by pressing the Y key.
Partclone: after completeing restoration
< Press "Enter" to continue...... > press the "ENTER" key. You can either power off or reboot> Make sure you remove the USB thumbdrive. after making your selection.