Professional Documents
Culture Documents
Computer Engineering
and Technology ENGINEERING
(IJCET), ISSN 0976 &
INTERNATIONAL
OF COMPUTER
6367(Print), ISSN 0976 6375(Online) Volume 3, Issue 3, October-December (2012), IAEME
TECHNOLOGY (IJCET)
IJCET
IAEME
Dr. G. M. Nasira
Assistant Professor
Dept. of Computer Science
Chikkam Govt. Arts College
Tirupur, Tamil Nadu 641 602
India
nasiragm99@yahoo.com
Dr. N. Nachamai
Assistant Professor
Dept. of Computer Science
Christ University Bangalore-29,
Bangalore-29, Karnataka
India
nachamai.m@christuniversity.in
ABSTRACT
The advances in the field of communication network, Wireless Sensors Network (WSN) is
became a very interesting and challenging area of Networks. Smart home system using
wireless sensor network technology enrich human life and helps to take care of the very old
people easier who lives alone. Smart Home is the integration of technology and services
through home networking for better quality of living. The smart home system consists of
three components: physical components, control system and communication system. In this
paper, basic structure of a smart home system and a comparative analysis of different smart
home system with its components are discussed.
Key Words: Smart Home, ZigBee, Sensors.
1. INTRODUCTION
The average age of people in India is on the rise. New challenges are arising to provide a safe
and secure living environment for them. As per the survey done by S. Irudaya Rajan [1], by
2050, the world population will peak to three hundred million. In that population, more
would be elder than younger. The situation arises; where elder people live alone without
assistance really require constant monitoring. Figure 1 shows the raising percentage of
elderly 60 and above from 2001 to 2051.
94
Percentage
17.3
14.5
11.9
9.9
7.5
2001
Percentage
8.2
2011
2021
2031
2041
2051
Year
Figure 1. Percentage of elderly 60 and above during the year 2001 2051
The smart home system provides an inviolable, safe sheltered and comfortable life like in an
assisted living environment. It enhances traditional security and safety mechanism by using
intelligent monitoring and access control.
The structure of this paper is as follows. Section 2 describes basic structure of a wireless
smart home and its components. In section 3 comparative analysis of different smart home
system is discussed. The conclusion and future research direction are presented in section 4.
2. SMART HOME SYSTEM
The basic structure of a smart home system is depicted in figure 2. The smart home
integration consists of three major areas, first, the physical components (electronic devices
sensors, actuators), second, the control system (artificial intelligence/expert system) and third,
the communication system (wired/wireless network) which connects physical components
and control system. The control system can access from home exterior through external home
network like mobile network or Internet. In a smart home system the physical components
sense the environment and pass to home control system through home sub networks and
home network. Home control system takes the decision and passes the control information to
the actuators through home network. For example, gas sensor detects the gas leakage in a
smart home and passes this message to the home control system through ZigBee, a wireless
network. Control system decides to switch off the gas valve and pass this to actuator, which
will off/close the gas valve.
95
Home Network
Home Sub
Network-1
Home
External
Network
Home
Control
System
Home Sub
Network-2
Wireless
Network
Smart Devices/
Sensors
Wired/Wireless
Network
Sensing property
Physical Properties
Motion and Presences
properties
Biochemical Agents
Others
Nave Bayes Classifiers identify the activity that corresponds with the greatest
probability to the set of sensor values observed.
Decision trees - To learn logical description of the activities.
The probabilistic sequence of sensor events are encoded using Markov models dynamic,
Bayes networks and Conditional random fields. Temporal Reasoning with a rule based
system or Neural Network with reinforcement learner or Fuzzy rules develop an automated
decision-making and control techniques.
802.15.1
WiMAX
802.11b,
802.11g
802.16
ZigBee
802.15.4
Wi-Fi
Transmission
distance
2.4G
1M
>10mW
High
10m
2.4G/5G
11-54M
>10mW
Low
200m
2-11G
868/915M,
2.4G
70M
>10mW
Medium
30Km
20-250K
<10mW
High
100m
97
R
O
U
T
I
N
G
A
L
G
O
R
I
T
H
M
C
O
M
M
U
N
I
C
A
T
I
O
N
B
A
S
E
D
To support
location
service
Control System
Generic
Sensor,
Actuator
ZigBee
Information
Extractor
Development of node
and the coordinator
for smart home
system [7]
Node,
coordinator
ZigBee
C/S architecture
based on socket
communication
mechanism of
TCP/IP protocol
GPRS
Improved
routing
Apply the
algorithm
whole system
based on the in practice and
Dijkstra
test
Algorithm
Develop a new
intelligent home
control system based
on WSN [8]
Generic
Sensor,
Actuator
ZigBee
Internet
LQIR Link
Quality
To support
Indicator Location Based
Based Routing
Proposed an
improved routing
algorithm
combining ClusterTree and AODVjr [9]
ZigBee
algorithm for
routing
discovery and
maintenance
Monitoring of
Elderly people at
home [10]
IR,
Temperature,
Hygrometry
Support Vector
Machine
Classification
Algorithm
Improving a
classification
result using
priori
knowledge
10
11
12
13
14
C
O
N
T
R
O
L
Jess / DMPR
Disjoint
Multipath
Routing
Home
Network
S
Y N
S E
T T
E W
M O
R
K
Future
Enhancement
Smart Devices
/Sensors Used
15
Home external
User GUI
Network
Controlling /
Network
Algorithm
Objective
Group/
Parameter
Internet
WiMagnetic,
fi(camaraMulti-sensor centric
Convergence
photo diode,
control
smart sensor network
UMPC-Ultra
Only
technology
Mobile
microphone, system)Zig
Wi-fi
design using mobile
mobile PC module
with 3D
device user monitoring
motion,
bee (sensordevice [11]
modelling
vibration
control
system
Mobile health
monitoring system
Ring type
HSDPA, WiGUI in
using wearable ring- pulse sensor,
Bluetooth
Fi, Wimax,
Smart
type pulse monitor smart phone,
GPRS
phone
sensor with smart ASUSP552W
phone [12]
Design and
Virtual
implementation of
Light and
ZigBee
Wi-Fi
_
_
Home GUI
home automation Smoke sensor
architecture [13]
Dynamic intelligent
Android
Implementing
User behavior
Smart Classifier using
home control system
platform
GSM, WiFi
the proposed
phone
Analysis
Database
using Android phone
network
idea
[14]
Incorporate
Sensor unit for
more
electric
Monitoring
In-House monitoring
intelligent
appliance, bed ZigBee
Only monitoring In-home only software
for elders [15]
features like
usage, water
GUI
positioning
usage
method
Pulse sensor,
Implementing EMixed
Pressure
Healthcare using
WSN
Internet
Positioning
sensor, fire
WSN [16]
Algorithm
sensor
Implementing a smart
Temperature,
home with digital
Door lock
gas, fire
ZigBee
Internet
door lock as base
LCD
sensors
station [17]
Deployment of a
activity-centered
WSN in a living
Temperature,
ZigBee
computing
laboratory home
Pressure, Light
middleware
Environment [18]
Updating the
Implement a smart
Smoke, gas,
system with
home security system temperature,
ZigBee
Sending SMS
GSM
intelligent
biosensor
[19]
home security
Hybrid
Algorithm
Improved
Prediction of user
(Prediction
Algorithm for
interaction in
Decision Tree
Algorithm)
short memory
energy management
method
Day Type
of first order
smart home [20]
Model, First
markov model
order Semi
markov Mode
98
16
Study of
psychological
characteristics of
home user using
multi agent system
[21]
Multi agent
System
17
Friendly SH energy
mgmt. [22]
Smart meter,
Smart Switch
Zigbee
Grid based
controller
Smart
Field
Multi-in-one
Interactive Programmable
smart meter
terminal
gate array
18
Thermal
Sensor
Jadex-using BDI
Agent
The interface
Jadex Agentof the agent
Hieratical goal
system with
decompositionbuilding
Goal Plan
automation
Hierarchy
installations
Ubilenc
Optimize the
Hydra Event performance of
Management reading energy
consumption
Making this to
assisted living
Changing the
for the elderly.
weighting
Using
factors and for
knowledge of
adding and
the user
removing rules
routines for
prediction
19
20
Fuzzy control
process
Clustering
algorithm for
smart home
events
Improving an
algorithm
using pattern
recognition
Dexing Zhong, Wei Ji, Yongli Liu and Jiuqiang Han demonstrated a design of smart
home network based on Zigbee wireless sensor network technology [9]. A more convenient
and reliable wireless communication environment for Zigbee wireless network in the smart
home system is achieved by using an improved routing algorithm, which is combination
Cluster-Tree and AODVjr algorithms.
3.1.2. Network Based
Anthony Fleury, Michel Vacher and Norbert Noury examined a SVM-Health Smart
home [10] in a real flat, with Infra-Red Presence Sensors (location), door contacts (to control
the use of some facilities), temperature and hygrometry sensor in the bathroom, and
microphones (sound classification and speech recognition). The data collected from the
various sensors, is then used to classify each temporal frame into one of the activities of daily
living that was previously acquired (seven activities: hygiene, toilet use, eating, resting,
sleeping, communication, and dressing/undressing). This is done by using Support Vector
Machines.
Bonhyun Koo Kyusuk Han James J. Park and Taeshik Shon implemented [11] the
design and implementation of the wireless sensor node and the coordinator based on ZigBee
technology. A monitoring system is built by using the GPRS network. An improved routing
algorithm based on the Dijkstra algorithm is presented to support multi-hop communications.
Yu-Chi Wu, Pei-Fan Chen, and Zhi-Huang Hu presented a mobile health monitoring
system with the integration of a wearable ring-type pulse monitoring sensor with a smart
phone [12]. Through Bluetooth measurements are transmitted to the smart phone where user
can monitor own pulse or temperature. Measured data are transmitted to a remote server
through the mobile communication of the smart phone, such as SDPA, Wi-Fi, WiMax,
GPRS, etc. The remote server also tracks the position of the monitored person in real time.
Khusvinder Gill, Shuang-Hua Yang, Fang Yao, and Xin Lu implemented a ZigBee
based virtual home automation system and Wi-Fi network which integrated through a
common home gateway [13]. The home gateway provides a simple and flexible user interface
and remote access to the home system.
Jiali Bian, Dengke Fan, and Junming Zhang proposed a new type of intelligent home
control system [14], using Android Phone which can act as a temporary home gateway
instead of default gateway. An intelligent control system also constructed based on user
behaviour analysis. To achieve energy savings and reduce cost they made the system to
automatically shut down the unused device.
Anuroop Gaddam, Subhas Chandra Mukhopadhyay, and Gourab Sen Gupta deliberate
and test the performance of the smart home monitoring system using zigbee radio frequency
(RF) communication [15]. Few highly accurate inexpensive smart sensors are used to develop
a typical in-house home monitoring for elder care application.
Hairong Yan, Hongwei Huo, Youzhi Xu, and Mikael Gidlund recommended a
wireless sensor network application for 24 hour constant monitoring [16] without disturbing
daily activities of elderly people. A mixed positioning algorithm is also proposed to
determine the location, where the elderly person is. This helps the system to determine the
persons activities and further to make decisions about his/her health status. This system
provides two types of basic needs: identify abnormal events and emergency alarms to doctor
100
through auto call, SMS and e-mail and day-to-day requirement such as taking of medicine,
turn off water heater and so on.
Yong Tae, Park Pranesh Sthapit, and Jae-Young Pyun designed a smart digital door lock
system for home automation [17]. This system consists, network of sensor nodes and
actuators with digital door lock as base station. A door lock system consists of RFID reader
for user authentication; touch LCD, motor module for opening and closing of he door, sensor
modules for detecting the condition inside the house, communication module, and control
module for controlling other modules. Advantage of this system is, it can be easily installed
immediately as per necessity without any prerequisite additional infrastructures.
Dipak Surie, Olivier Laguionie, Thomas Pederson implemented a smart home to keep
track of every day object and their state changes produced based on the users interaction
with them[18]. A ZigBee communication protocol based wireless sensor networking of 42
everyday objects embedded with 81 simple state change sensors of eight sensor types in a
living laboratory smart home environment is implemented.
Syam Krishna, J.Ravindra designed a remote home security system based on ZigBee
[19]. It consists of microcontroller based wireless sensor network center node with GSM
module, data collecting node, device control node and mobile phone. This system send
alaram signal to WSN center node when ever the ubnormal situation arise. The center node
send alarm short message to the users through the GSM module and GSM network
immediately. Similarly the user can also control the various devices connected with device
control unit through SMS.
3. 2. Control System
Kaibin Bao, and Florian Allerding discussed about the prediction of user interactions
within a real world scenario of energy management for a smart home [20]. To address the
challenge of balancing energy demand and generation, external signals, reflecting the low
voltage grids state, are used. Two prediction algorithms to estimate the future behaviour of
the smart home are presented: The Day Type Model and a probabilistic approach based on a
first order Semi Markov Model. Some experimental results with real world data of the KIT
smart home are presented.
M. R. Alam, M. B. I. Reaz, M. A. Mohd Ali, S. A. Samad, F. H. Hashim, M.K.
Hamzah, have an idea to study the psychological characteristics of home user [21]. People
follow some specific patterns in their life style. Inhabitant activity classification plays a vital
role to predict smart home events. This paper proposed a multiagent system to track the user
for task isolation. The system is composed of cooperative agents, which works by sharing
local views of individual agents. An algorithm is derived based on opposite entity state
extraction for activity classification. The algorithm clusters the smart home events by
isolating opposite status of home appliance. Result shows that the proposed algorithm can
successfully identify inhabitant activities of various lengths.
Yong Zhao, Wanxing Sheng, Junping Sun, Weijun Shi build up the friendly smart
home energy system [22] which is composed of smart meter, smart socket/switch, grid
friendly appliance controller, smart interactive terminal and other smart devices. Then it
respectively elaborates and analyses their main functions, and gives their design block
diagrams. Then they look into the future of home energy system and also introduce the
ZigBee communication technology and its smart energy profile, and give a few typical
transactions based on the ZigBee Smart Energy profile.
101
Christian Reinisch and Wolfgang Kastner developed [23] a smart home control
system with an agent characteristic such as goal drivenness, robustness and learning capable
behaviour complement. They describe the complete process from selection of the most suited
agent approach for smart homes to detailing the transition from system specification to
implementation.
Marco Jahn, Marc Jentsch, Christian R. Prause, Ferry Pramudianto, Amro Al-Akkad,
and Rene Reiners evolve a novel smart home system with integration of energy efficiency
features [24]. The smart home application is built on top of Hydra, a middleware framework
that facilitates the intelligent communication of heterogeneous embedded devices through an
overlay P2P network. Common devices available in private households and integrate wireless
power metering plugs to gain access to energy consumption data are interconnected. These
data are used for monitoring and analyzing consumed energy on device level in near realtime. The combination of both, a technically sophisticated smart home application and at the
same time transparent, intuitive user interfaces showing information regarding the energy
usage e.g. energy price, energy source, standby consumption has the potential to bring the
vision of the energy efficient smart home within reach.
Antti-Matti Vainio, Miika Valtonen, and Jukka Vanhala make out an idea to change
the environment, which always conforms, to the users desires and needs [25]. The
environment actuators are controlled proactively, so that the system can always anticipate the
users requirements. In this way, the user would not need to bother with equipment control.
4. CONCLUSION
Smart home system is used to monitor object/human remotely. Different kinds of sensors like
temperature, gas, light, ect., are used in smart home. Recommended home network is ZigBee
IEEE 802.15.4 because of its low power consumption. Internet, GSM, Mobile Network are
use as an external home access network. Using embedded concept any device can be used as
a gateway. Digital lock is used as a gateway. Smart phone can play dynamic roll as gateway
as well as external home network.
People who are elderly or disabled benefit the most from a smart home system. These
systems help people those who are less mobile, or in delicate health, the opportunity to be
independent, rather than staying in an assisted living facility. In this paper, the comparative
study of different smart home system has been discussed. Since the smart home systems are
application specific, no particular system can be considered better than other. Future
perspectives of this work are focused towards developing an energy efficient smart home
system.
5. REFERENCES
1. S.Irudaya Rajan, Population Aging and Health in India, Centre for Enquiry into Health and
Allied Themes, Survey Number 2804, 2805, Mumbai, 2006.
2. Diane J. Cook and Sajal K. Das, How Smart are our Environments? An Updated Look at the
State of the Art, Parvasive and mobile computing, vol.3, pp. 53-73, 2007.
3. Rosslin John Robles, Tai-hoon Kim, Applications, Systems and Methods in Smart Home
Technology: A Review, International Journal of Advanced Science and Technology, Vol.
15, 2010.
4. Diane J. Cook, Juan C. Augusto, Vikramaditya R. Jakkula, Ambient Intelligence:
Technologies, Applications, and Opportunities, Parvasive and mobile computing, vol.5, pp
277-298, 2009.
102
103