Professional Documents
Culture Documents
Reverse Blocking Triode Thyristors: Semiconductor Technical Data
Reverse Blocking Triode Thyristors: Semiconductor Technical Data
. . . Glassivated PNPN devices designed for high volume consumer applications such
as temperature, light, and speed control; process and remote control, and warning
systems where reliability of operation is important.
SCRs
4 AMPERES RMS
50 thru 600 VOLTS
G
A
CASE 77-08
(TO-225AA)
STYLE 2
Symbol
VDRM
or
VRRM
Value
Unit
Volts
50
100
200
400
600
IT(RMS)
Amps
IT(AV)
2.55
Amps
ITSM
20
Amps
I2t
1.65
A2s
PGM
0.5
Watt
PG(AV)
0.1
Watt
IGFM
0.2
Amp
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, (cont.)
positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a
constant current source such that the voltage ratings of the devices are exceeded.
Preferred devices are Motorola recommended choices for future use and best overall value.
Symbol
Value
Unit
VGRM
Volts
TJ
40 to +110
Tstg
40 to +150
in. lb.
1. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower
case-to-sink thermal resistance. Anode lead and heatsink contact pad are common.
For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200C. For optimum
results, an activated flux (oxide removing) is recommended.
Symbol
Max
Unit
RJC
C/W
RJA
75
C/W
Symbol
Min
Typ
Max
Unit
10
100
A
A
2.2
Volts
30
75
200
500
0.4
0.5
0.2
0.8
1
IHX
0.3
0.4
0.14
3
6
2
mA
dv/dt
V/s
Turn-On Time
tgt
1.2
Turn-Off Time
tq
40
IDRM, IRRM
Forward On Voltage
(IFM = 1 A Peak)
VTM
IGT
VGT
TJ = 40C
100
DC
70
60
50
HALF SINE WAVE
RESISTIVE OR INDUCTIVE LOAD.
50 to 400 Hz
40
30
20
10
0
.4
.8
1.2
1.6
2.0
2.4
2.8
3.2
3.6
4.0
80
Volts
TJ = 25C
TJ = 25C
TJ = 40C
TJ = +110C
90
8
HALF SINE WAVE
RESISTIVE OR INDUCTIVE LOAD
50 TO 400Hz.
DC
2
0
0
.4
.8
1.2
1.6
2.0
2.4
2.6
3.2
3.6
4.0
Package Interchangeability
The dimensional diagrams below compare the critical dimensions of the Motorola C-106 package
with competitive devices. It has been demonstrated that the smaller dimensions of the Motorola
package make it compatible in most lead-mount and chassis-mount applications. The user is
advised to compare all critical dimensions for mounting compatibility.
.295
____
.305
.145
____
.155
.148
____
.158
.115
____
.130
.425
____
.435
.400
____
.360
.095
____
.105
.385
____
.365
.575
____
.655
.040
.020
____
.026
.094 BSC
.025
____
.035
.315
____
.285
.420
____
.400
.015
____
.025
.045
____
.055
.026
____
.019
.520
____
.480
5_ TYP
1 2 3
.050
____
.095
.127
____
DIA
.123
.135
____
.115
.105
____
.095
.105
____
.095
.054
____
.046
.190
____
.170
PACKAGE DIMENSIONS
B
U
Q
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
C
M
STYLE 2:
PIN 1. CATHODE
2. ANODE
3. GATE
1 2 3
V
G
S
R
0.25 (0.010)
D 2 PL
0.25 (0.010)
DIM
A
B
C
D
F
G
H
J
K
M
Q
R
S
U
V
INCHES
MIN
MAX
0.425
0.435
0.295
0.305
0.095
0.105
0.020
0.026
0.115
0.130
0.094 BSC
0.050
0.095
0.015
0.025
0.575
0.655
5 _ TYP
0.148
0.158
0.045
0.055
0.025
0.035
0.145
0.155
0.040
MILLIMETERS
MIN
MAX
10.80
11.04
7.50
7.74
2.42
2.66
0.51
0.66
2.93
3.30
2.39 BSC
1.27
2.41
0.39
0.63
14.61
16.63
5 _ TYP
3.76
4.01
1.15
1.39
0.64
0.88
3.69
3.93
1.02
CASE 7708
(TO225AA)
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
*C106/D*
C106/D