You are on page 1of 1

Cement backerboard 1/2 inch thick covered on both sides by fiberglass mesh

32x60 $15
Hardie board/Georgia Pacific Denshield + Waterproof/Vapor barrier - Kerdi?
Scoring knife - Carbide tip or utility knife
2inch Alkaline resistant glass fibre tape for joints
For Denshield, use urethane sealant to seal of screws and seams with Wedi sealan
t or Sikaflex 221
Denshield already has waterproof membrane on the surface. Only seams and corners
need waterproofing
Kerdi board / Kerdi for waterproof membrane / Redgard / Hydroban
Fiberglass reinforcing fabric for liquid applied waterproofing membrane + Mapei
Aquadefense OR Hydraflex OR Laticrete
Putty knife/chisel/flat pry bar
Utility knife
Drywall saw
Grout saw
Square
Notched trowel
Rubber trowel for grouting
Latex modified thin-set mortar (mastic not good for water exposure)
Powdered grout + Latex additive
Silicone caulk
Liquid silicone sealer
Roofing nails/galvanized screws
1/8 or 1/16 gap installers/spacers OR Drywall nails + Proleveling system
Polymer modified Thinset by Mapie
3/8 or 1/8 inch / square notch trowel
Schulter ARDI FIX for sealing?
Sanded grout for 1/8 and larger
Non sanded ground for 1/8 or smaller
Rubber adhesive backed plastic flashing for lip of the shower pan to the framing
/studs
Stainblocker for grout
Custom Builder Products CBP - Polyblend sanded grout
SurfaceGard Sealer

You might also like