Professional Documents
Culture Documents
Adash A4900 Vibrio M
Adash A4900 Vibrio M
ISO alarms
ISO standard
The hand-held A4900 Vibrio M instrument comes with the Adash expert system for automatic machine fault detection
on site; basic vibro-diagnostics measurements such as bearing condition, identification of mechanical faults and
lubrication assessment and alarm setting in accordance with ISO 10816-3 for machine condition monitoring.
Measured vibration overall values are optionally displayed either in metric or imperial mode - velocity (RMS & Peak),
acceleration (RMS & Peak) and displacement (RMS, Peak, Peak-Peak).
Basic vibro-diagnostics measurements can be viewed with FFT spectrum, time signal and frequency bands. Other built-in
features includes the IR non-contact temperature sensor, LED stroboscope, stethoscope and LED torchlight.
The Vibrio M is equipped with 4MB of memory for data storage. Data memory allows you to perform off-route and route
measurements. The professional software DDS 2014 for Vibrio M can be downloaded from the Adash website free of
charge.
The instrument is supplied in two options; a standard carrying case that includes accelerometer, flat-type magnet, coiled
cable, measuring tip/probe, ear piece, 2 AA batteries, CD manual and calibration certificate; or the instrument in
professional carrying case includes accelerometer, flat-type magnet, coiled cable, measuring tip/probe, professional
headphone, leather shoulder case, 2 AA batteries, CD manual and calibration certificate.
True Peak
Adash standard
A4900 VIBRIO M
Displacement
Offline
measurement
Route
measurement
View
measurement
Unbalance
Looseness
Alert Messages
Sensor connection
Misalignment
Bearing faults
Value overload
Input overload
FFT spectrum
Time signal
Frequency bands
SIMPLE TO USE
Additional Features
IR non-contact
temperature
LED torchlight
LED stroboscope
Units selection
Stethoscope
Professional transport
case
Code: ARS-4900M-P
Code: ARS-4900M-S
Pub: ARS-Nov-2015