ALLOY STEEL AND STAINLESS STEEL BOLT
t Abstract of
‘OF HIGH-TEMPERATURE SERVICE | AIS3/A193M
| 1985
MATERALS MATERIALS F
g|3
IFT Notes: |
1. ASTM _A193/A7193M Is a specification
through the procedures
developed
of ASTM, A193/199M is under the jurisdiction of ASTM Committee 4-1 on
Steet, Stainless Steet, and Related Allays and is the direct responsibility
of its Subcommitiee
2. AT9IIA193M covers
11.22 on Valves and Fittings,
Inch and metric series products. This ebstract
presents the chemical and mechanical requirements for inch series car.
bon alloy steel and staintess steel bolting
threaded bolts,
material, including ext
and studs. It omits those requirements dealing
with quality assurance and inspection, a listing of applicable documents,
and valves for metric products. For the omitted information, refer to the
complete AtS3/A193M",,
The paragraph numbers thoughout this abstract are those of the com:
plete A183/A193M-85a.
3. ASTM A193/4193M-85a is abstracted, with permission, from the Annual
Book of ASTM Sta
Materials, 1916 Race Street, Phil
1.1. ‘This specification covers alloy and
stainless steel bolting materials for pressure
‘ tor high.
tomperature service, The term “bolting mate
used in this. specificati
bars, bolts, screws, studs, and stlid bolis.
‘The bars shail De hol-wought, The material
may be further processed by centerless
grinding or by cold drawing. Austenitic
inless steel may be solution-anneaied of
annealed and strainniaidened.
1.2. Several grades ate covered, including
forritic steels and austenitic stainless steels
designated 85, B8, etc. Selection will depenc
upon design, service conditions, mechanical
properties, and high-temperature character-
istics,
NOTE 1 — The committee foreuisting this specitication
‘has included thirteen steet types thal have been rather
extensively used 401 the piesent purbose. Other comp
onilions will bs conciderad for inclusion by (ho Conintt
te from Hime to time ws os nea en
NOTE 2 ~ For graces ol atloy-