a) (20 pts.) Determine the bus admittance matrix for load flow calculation. b) (20 pts.) Using the DC power flow method, determine the line flows and line losses. c) (20 pts.) With the results from b), construct a power flow diagram showing the direction of line flow calculated. For the single-line diagram shown in Figure 1:
Figure 1
Dr. Franklin Quilumba
EPN-2015B
National Polytechnic School
Department of Electrical Energy
Problem # 2. (40 points)
Consider a 3-bus system as shown in Figure 2 with a 230kV on the transmission lines and a 100 MVA as bases. a. (15 pts.) Calculate the bus admittance matrix b. (15 pts.) Use the FDLF method to calculate the voltages at all buses after three iterations. c. (10 pts.) Calculate power delivered by the generator at bus 3.