Professional Documents
Culture Documents
AD00839V Butterfly Valves Broch - LR PDF
AD00839V Butterfly Valves Broch - LR PDF
Table of Contents
Oklahoma City,
Okla., USA
Bi-Directional Sealing
Camerons DEMCO butterfly valve provides bi-directional
sealing at full-rated pressure with identical flow from either
direction.
The unique stem hole design in the disc ensures the dry stem
journal, and the hard-backed seat allows ease of installation,
reliable operation and in-field repairability without special
tools. DEMCO butterfly valves are available in sizes 2 to 36
(50 mm to 900 mm).
Flatted Double D
Upper Stem
Agriculture
Power
High-Flow Disc
Positively Oriented Disc
One-Piece Body
Hard-Backed
Seat
A
A. Dry Stem Journal Reduces Potential for
Leakage
The DEMCO valves disc is uniquely designed with a
continuous annular-raised band around the stem hole and
disc edge, which presses into the seat flat at every angular
position.
The resilient seat presses back with a higher force than the
line pressure, preventing leakage to the stem. In addition,
two O-ring ribs are provided in the seat stem bore, creating a
triple stem seal. In competitive stem seal designs with boot
seats, a seal is accomplished by an interference squeezing on
the stem or an O-ring in the stem journal. The potential for
leakage behind the seat is high for this competitive design.
As the disc wipes the seat, elongation of the stem seal area
allows leakage to collect behind the seat. This condition is
reduced by the DEMCO valves dry stem journal and hardbacked seat.
B
B. Hard-Backed Cartridge Seat
The DEMCO valves cartridge seat is constructed by
permanently bonding a resilient elastomer to a rigid backing
ring. In addition to superior sealing integrity, this design:
M
akes valve installation easier because no special
precautions are required for disc position. This is
especially advantageous when installing valves with
fail-closed actuators.
Reduces
high torque and premature failure caused by
elastomer distortion, as found in other non-rigid seat
designs.
S implifies seat replacement because the seat is slip-fitted
into the body with no need for special tools.
SPECIFICATIONS
Disc
Sizes
2 to 36 (50 mm to 900 mm)
Stem
Pressure Rating
2 to 12 (50 mm to 300 mm):
0 (throttling); 50, 200 and 285 psi
NEI-T: 2 to 10 (50 mm to 250 mm): 150 psi
14 to 36 (350 mm to 900 mm): 0, 50 and 150 psi
Upstream
Disc
D. End-of-Line Service
Lug body valves may be used in end-of-line service with
downstream piping removed. Only weld-neck or socket
flanges can be used for this service. Since upstream pressure
is excluded between the flange and the seat face by the
DEMCO flange seal design, there is no effective force to slide
the seat downstream. DEMCO 2 to 12 (50 mm to 300
mm) lug butterfly valves are suitable for liquid service up to
200 psi with downstream piping removed at 150 psi for 14
to 36 (350 mm to 900 mm) valves.
Lug body valves are recommended for isolation of pumps,
control devices or other system components, which may
need to be removed for repair or replacement. Lug valves
also are suitable for installation at points from which piping
expansion may proceed. Such valves normally are blanked
with blind flanges to protect the exposed seats until new
piping is attached.
Operating Temperatures
-30 F to 300 F (-34 C to 204 C), depending on
seat material selection and application (see page 32)
Series NE-C
Sizes 2 to 12 (50 mm to 300 mm) are available in both
wafer and lug styles. This series is a general purpose valve
with a neck length designed to provide full clearance for the
valve top over 2 of insulation on ASME Class 150 pipe
flanges.
Series NE-I
Sizes 2 to 12 (50 mm to 300 mm) are suited for a range
of applications in many industries, including food and
beverage utilities and process flowlines. This short neck
design is offered in a variety of body materials. The valves
are designed for installation between ASME Class 125 and
150 flanges.
Series NE-D
The valves in this series can be made in sizes 2 to 12 (50
mm to 300 mm). The Series NE-D valve is a short-neck valve
with body notches to fit popular, lightweight flange
patterns, making it ideal for both the bulk material handling
and the transportation industries. Valves also will center in
ASME Class 125 and 150 flanges.
Series NF-C
Sizes 14 to 36 (350 mm to 900 mm) are available in both
wafer and lug styles. The wafer body has two drilled locator
lugs at the top and bottom for ASME Class 150 flanges.
Bronze bearings are installed on both stems for reduced
operating torque.
Sanitary Features
Other benefits:
T he DEMCO dry journal stem seal system ensures sanitary
butterfly valve construction.
D
rilled passageways, a design originated by the DEMCO
brand, vent the entire interior of the disc. No closed
chamber is provided for the culture of undesirable
organisms.
D
iscs are produced from smooth and non-porous
investment castings. Stem bosses are reduced for
increased flow.
Marine
EMCO marine butterfly valves are available in the NE-C lug,
D
NE-I lug and wafer, and NE-D wafer styles, and conform to:
Title 46 of the Code of Federal Regulations
P art 56 of the US Coast Guards Marine Engineering
Regulations
T he American Bureau of Shipping Standard, including
tagging per MSS-SP-25 and testing per MSS-SP-67
Stem Seal
Vented
Design
High-Flow
Discs
Trap-Free
Flow Way
A. Actuators
Consult Cameron or visit www.c-a-m.com/valveautomation
for actuation options.
C. Gear-Operated
C. Gear Operators
DEMCO weatherproof gear operators are offered with a
choice of handwheel, chainwheel or square nuts. The worm
gear has either self-locking set screws to control open and
closed positioning or an optional adjustable memory-stop
for balance return to a preset open position after closing.
Key No.
Qty.
Description
Material
Body
Seat
Disc
Upper Stem
Lower Stem
Spring Pin
Stainless Steel
14
Retainer
Stainless Steel
22
Top O-ring
Buna-N
23
Stem O-ring
Buna-N
24
Bearing
Bronze
22
24
1
4
1
7
14
24
Series NE-D
Wafer
Series NE-I
Lug
Series NE-I
Wafer
1
23
2
3
Series NE-C
Lug
HOW TO ORDER
XXXXX
Base Part Number
NE-C/NE-I/NEI-T
Wafer
Lug
NE-D
Wafer
Based on
valve series
and shut-off
pressure.
See page 12.
X
Body
Configuration
23
Series NE-C
Wafer
X
Body Material*
NE-C (Long-Neck)
Ductile Iron (Lug)
Cast Iron (Wafer)
NE-I and NE-I Sanitary
Ductile Iron (NE-I, Wafer Only)
Aluminum Bronze
Carbon Steel (NE-I Only)
Aluminum (NE-I, Wafer Only)
ENC-Coated Ductile Iron
Stainless Steel
NE-D
Ductile Iron
NEI-T
Ductile Iron
Wafer Short-Neck
Lug Long-Neck
Gray Iron (Long-Neck Wafer)
Aluminum Bronze
Carbon Steel
Aluminum (Wafer Only)
Stainless Steel
1
2
X
Stem
Material
NE-C, NE-I
and NE-D
416 SS
316 SS**
Monel6
1
3
4
5
6
8
NEI-T
316 SS
Vented***
316 SS
Solid***
NEI-Sanitary
1
2
3
4
5
8
316 SS***
X
Disc
Material
XX
Seat Elastomer
Actuation
31
32
33
34
35
36
37
01
02
03
04
05
35
05
32
34
35
37
05
Handle
10 Position Lkg.
Throttling Mem./
Stop
Square Nut
2-Position Lkg.
10-Position Sanitary
(NEI-T Only)
None
10-Position Lkg.
Corrosion-Resistant
2-Position Lkg.
Corrosion-Resistant
Throttling Mem./
Stop CorrosionResistant
Gear Operators5
Handwheel
Crank 2 to 12 (50
mm to 300 mm)
Chainwheel
Square Nut
Bare Shaft
14
24
5
64
8
9
K
L
M
A
B
C
D
E
Series NF-C
14 to 24 (350 mm to 600 mm)
24
Key No.
Qty.
Description
Material
Body
Seat
Disc
Upper Stem
Lower Stem
14
24
Spring Pin
Stainless Steel
14
Retainer (Spacer) +
Stainless Steel
22
Top O-ring
Buna-N
23
Stem O-ring
Buna-N
24
Bearing
Bronze
4
7
23
23
6
2
7
23
23
25
HOW TO ORDER
XXXXX
Base Part Number
Wafer
Lug
Based on
valve series
and shut-off
pressure.
See page 12.
X
Body
Configuration
X
Stem
Material
Body Material*
1
2
3
4
8
416 SS
316 SS
Monel2
316 SS
Monel2
Aluminum
Bronze
Nickel-Plated Iron
PVF-Coated
Ductile Iron1
X
Disc
Material
2
3
4
5
XX
Seat Elastomer
Actuation
Buna-N
Black Neoprene
Hypalon6
FKM
EPDM
(Example: 18 (450 mm) NF-C, 150 psi Lug, SS Trim, Buna-N Seat, WGO 23822-512231A)
* Standard coating is green enamel; other coatings are available on request.
1 150 psi only.
2 See material trademark note on page 40.
10
31
32
33
34
35
None
Gear Operators
Handwheel
Chainwheel
Square Nut
Bare Shaft
9
A
C
D
E
Series NF-C
30 and 36 (750 mm and 900 mm)
Key No.
Qty.
Description
Material
*
Body
Seat Hard-Backed
Disc
*
*
Upper Stem
Lower Stem
Disc Screw
18-8 SS
Key
Stainless Steel
Buna-N
O-ring
14
Spacer
Steel
24
Upper Bearing
Bronze
25
Lower Bearing
Bronze
26
Thrust Collar
Bronze
27
Set Screw
18-8 SS
28
Cap
Ductile Iron
29
Screw
Carbon Steel
30
Lockwasher
Carbon Steel
24
14
24
7 9
6
25
27
26
28 29 30
HOW TO ORDER
XXXXX
Base Part Number
X
Body
Configuration
Wafer
Lug
X
Body Material*
Ductile Iron
(Wafer or Lug)
X
Stem
Material
416 SS
316 SS
Monel1
X
Disc
Material
316 SS
Monel1
Aluminum
Bronze
Ductile Iron, NickelPlated
2
3
4
XX
Seat Elastomer
Actuation
Buna-N
FKM
EPDM
31
34
35
Handwheel
Chainwheel
Square Nut
Bare Shaft
A
C
D
E
(Example: 36 (900 mm), 150 psi, Bronze Disc, EPDM Seat with Gear Op. 24357-111435A)
* Standard coating is green enamel; other coatings are available on request.
1 See material trademark note on page 40.
11
in.
(mm)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
Wafer
Lug
22119
22225
22234
22243
5.8
8.0
22120
22226
22235
22244
7.0
9.9
22121
22227
22236
22245
7.7
10.7
22122
22228
22237
22246
11.4
17.0
22123
22229
22238
22247
14.7
24.5
22124
22230
22239
22248
17.6
28.5
22125
22231
22240
22249
28.5
43.5
22126
22232
22241
22250
47.9
65.9
22127
22233
22242
22251
71.0
98.5
in.
(mm)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
Iron, Steel, SS
Bronze
Aluminum
Bronze
Steel, SS
22128
22252
22261
22270
4.9
4.7
2.8
6.8
7.0
22129
22253
22262
22271
6.4
6.2
3.4
8.7
8.9
22130
22254
22263
22272
6.9
6.7
4.1
9.5
9.7
22131
22255
22264
22273
10.2
9.9
5.9
15.7
16.0
22132
22256
22265
22274
13.7
13.4
8.7
23.1
23.5
22133
22257
22266
22275
16.4
16.0
10.8
27.0
27.5
22134
22258
22267
22276
28.4
28.0
18.2
42.0
42.5
22135
22259
22268
22277
44.8
44.3
30.4
64.4
64.9
22136
22260
22269
22278
66.8
66.3
47.2
96.8
97.5
Description
in.
(mm)
200 psi
Weight
2
(50)
2-1/2
(65)
3
(80)
4
(100)
6
(150)
8
(200)
10
(250)
12
(300)
23150
23151
23152
23153
23154
23155
See chart above: NE-I, 2 to 12 (50 mm to 300 mm)
23156
23157
in.
(mm)
200 psi
285 psi
50 psi
Throttling
Weight (lb bare stem) Wafer
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
22181
22279
22285
22291
4.9
22129
22253
22262
22271
6.4
25093
25135
25132
25136
6.9
22183
22281
22287
22293
10.2
22184
22282
22288
22294
13.7
22185
22283
22289
22295
16.4
22134
22258
22267
22276
28.4
22186
22284
22290
22296
44.8
22136
22260
22269
22278
66.8
in.
(mm)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
6
(150)
8
(200)
10
(250)
Iron, Steel, SS
Bronze
Aluminum
Bronze
Steel, SS
24680
4.9
4.7
2.8
6.8
7.0
24681
6.4
6.2
3.4
8.7
8.9
24682
6.9
6.7
4.1
9.5
9.7
24683
10.2
9.9
5.9
15.7
16.0
24684
16.4
16.0
10.8
27.0
27.5
24685
28.4
28.0
18.2
42.0
42.5
24686
44.8
44.3
30.4
64.4
64.9
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
Wafer
Lug
23820
24440
24445
102
116
23821
24441
24446
166
203
23822
24442
24447
214
239
23823
24443
24448
257
332
23824
24444
24449
401
535
Marine valves: consult Cameron for data sheets B-255, B-256 and B-258.
12
in.
(mm)
Description
150 psi
50 psi
Weight
in.
(mm)
30
(750)
36
(900)
Wafer
Lug
24141
24924
935
1050
24357
25061
1500
2020
Marine Series
DEMCO marine butterfly valves meet all the requirements of US Coast Guards Marine Engineering Regulations as outlined in
Title 46 of the Code of Federal Regulations, Part 56 and The American Bureau of Shipping Standard, including tagging per
MSS-SP-25 and testing per MSS-SP-67. All valves are shell tested at 1-1/2 times rated working pressure and seat tested at rated
working pressure.
in.
(mm)
200 psi
50 psi
285 psi
Weight
(lb bare stem)
NE-C Long-Neck Body
Wafer
Gray Iron
Lug
Ductile Iron
NE-I Short-Neck Body
Wafer
Iron, Steel, SS
Bronze
Lug
Bronze
SS, Steel
Description
in.
(mm)
150 psi
50 psi
Weight
(lb bare stem)
NF-C Long-Neck Body
Lug
Ductile Iron
Bronze
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
22923
22932
22914
22924
22933
22915
22925
22934
22916
22926
22935
22917
22927
22936
22918
22928
22937
22919
22929
22938
22920
22930
22939
22921
22931
22940
22922
5.8
8.0
7.0
9.9
7.7
10.7
11.4
17.0
14.7
24.5
17.6
28.5
28.5
43.5
47.9
65.9
71.0
98.5
4.9
4.7
6.8
7.0
6.4
6.2
8.7
8.9
6.9
6.7
9.5
9.7
10.2
9.9
15.7
16.0
13.7
13.4
23.1
23.5
16.4
16.0
27.0
27.5
28.4
28.0
42.0
42.5
44.8
44.3
64.4
64.9
66.8
66.3
96.8
97.5
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
30
(750)
36
(900)
24611
24653
24612
24654
24613
24655
24614
24656
24615
24657
2227182
2227184
2227183
2227185
116
113
203
199
239
235
332
325
535
525
1050
N/A
2020
N/A
HOW TO ORDER
XXXXX
Base Part Number
Wafer
Lug
X
Body
Configuration
Ductile Iron
Aluminum Bronze
Carbon Steel
Stainless Steel
X
Stem
Material
Body Material*
1
3
4
8
416 SS*
316 SS
Monel
Stainless Steel
Monel1
Aluminum
Bronze*
X
Disc
Material
2
3
4
Buna-N*
Black Neoprene
Hypalon1
FKM
EPDM*
Natural Rubber
White Neoprene
XX
Seat
Material
31
32
33
34
35
36
37
X
Actuation
10-Position Handle
Throttling
Memory Stop
2-Position Locking
Worm Gear
Handwheel
1
2
6
A
(Example: 6 (150 mm) 200 psi Wafer, Standard Trim with 10-Position Handle 22928-1114311)
* Standard base trim options.
** Wafer 2 to 12 (50 mm to 300 mm) only.
Lug 2 to 36 (50 mm to 900 mm).
Note: 30 and 36 (750 mm to 900 mm) available with ductile iron lug body only.
1 See material trademark note on page 40.
13
22
24
4
7
14
24
1
23
2
1
3
1
6
23
Parts List for Series NE-C, NE-I and NE-D (Consult a Cameron representative for replacement parts for Series NE, NE-S and NE-N.)
Key
Description
No.
1
6
7
14
22
23
24
Body
2
(50 mm)
2-1/2
(65 mm)
3
(80 mm)
4
(100 mm)
5
(125 mm)
6
(150 mm)
NE-C Wafer
Options
22137-012
22138-012
22139-012
22140-012
22141-012
22142-012
NE-C Lug
Options
NE-I Wafer
Options
21986-051
NE-I Lug
Options
NE-D Wafer
Options
22695-05x
Seat
Options
3 NE-D Seat (See Below 6)
Disc
200 psi
285 psi
50 psi
Throttling
Options
PVF-Coated, 200 psi
Upper Stem
NE-C
NE-I
NE-D
Upper Stem
NE-C
-Utility Top
NE-I
Lower Stem
Stem Material Options
Spring Pin (2)
302 SS
Retainer
Stainless Steel
Top O-ring
Buna-N
Stem O-ring5
Buna-N
Bearing (2)
Bronze
22681-01x
22187-021
1786-xxx
22045-0xx
22196-0xx
22205-0xx
22214-0xx
22714-001
22066-00x
22073-00x
22073-00x
22334-00x
22341-00x
22080-00x
5526-113
22526-001
22143-012
22144-012
22145-012
21988-051
1 EPDM seat options: Standard Peroxide-Cured -135, Food Grade -035 Peroxide-Cured, Sulfur-Cured -235.
2 Alloy 20 not available for 285 psi.
3 8 to 12 (200 mm to 300 mm), 285 psi Aluminum Bronze, use -024.
4 8 to 12 (200 mm to 300 mm), Upper Stem 17-4 PH SS (part number suffix -012), Lower Stem 316 SS.
5 Four required for throttling (0 psi) valves only.
6 3 (80 mm) NE-D seat part number 25095-xxx.
7 See material trademark note on page 40
14
8
10
12
(200 mm) (250 mm) (300 mm)
24
4
7
14
24
23
23
3
1
6
2
7
23
23
25
Part List for Series NF-C, (Consult a Cameron representative for replacement parts for Series NF.)
Key
No.
Qty.
4
6
7
14
23
24
25
1
1
2
1
Note 1
2
1
Description
Body
Lug
Wafer
Seat
Disc
Upper Stem
Lower Stem
Spring Pin
Retainer (Spacer)2
Disc O-ring
Upper Bearing
Lower Bearing
150 psi
50 psi
Throttling
PVF-Coated
14
(350 mm)
16
(400 mm)
18
(450 mm)
20
(500 mm)
24
(600 mm)
23827-051
23825-012
23911-051
23907-012
23901-051
23899-012
23891-051
23881-012
23875-051
23873-012
23829-03x
23913-03x
23903-03x
23893-03x
7103-03x
23830-0xx
24450-0xx
24455-0xx
24460-001
23833-00x
23834-00x
5446-25040
5502-137
5526-220
5086-044
5086-045
23915-0xx
24451-0xx
24456-0xx
24461-001
23917-00x
23918-00x
5446-25040
5502-150
5526-223
5086-050
5086-051
23905-0xx
24452-0xx
24457-0xx
24462-001
23897-00x
23898-00x
5446-25048
5502-175
5526-328
5086-048
5086-049
23895-0xx
24453-0xx
24458-0xx
24463-001
23897-00x
23898-00x
5446-25048
5502-175
5526-328
5086-048
5086-049
23877-0xx
24454-0xx
24459-0xx
24464-001
23879-00x
23880-00x
5446-25064
24470
5526-331
5086-046
5086-047
Material
Ductile Iron (Lug) -051
Cast Iron (Wafer) -012
Buna-N -031 Blk. Neoprene -032
Hypalon4 -033, FKM -034
EPDM3 -X35
316 SS -002 Monel4 -003
Aluminum Bronze -014
Nickel-Plated Iron -005
PVF-Coated Iron -001
416 SS -001, 316 SS -002
Monel4 -003
Stainless Steel
Steel
Buna-N
Bronze
Bronze
15
H
G
R
N
Dimensional Data
Size in.
2
2-1/2
3
4
5
6
8
10
12
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
5.62
6.12
6.38
7.12
7.75
8.25
9.44
11.25
12.19
8.44
9.19
9.69
11.00
12.12
13.25
15.56
18.69
21.69
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.00
5.00
5.00
0.408
0.408
0.408
0.408
0.408
0.408
0.533
0.533
0.533
4.75
5.50
6.00
7.50
8.50
9.50
11.75
14.25
17.00
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
3/4 - 10
7/8 - 9
7/8 - 9
4
4
4
8
8
8
8
12
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
0.44
0.44
0.44
0.44
0.44
0.44
0.56
0.56
0.56
0.625
0.625
0.625
0.625
0.838
0.838
0.838
0.963
1.338
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.750
44
47
47
54
57
57
65
70
82
143
155
162
181
197
210
240
286
310
214
233
246
279
308
337
395
475
551
105
124
137
175
197
222
279
340
409
102
102
102
102
102
102
152
152
152
83
83
83
83
83
83
127
127
127
10.36
10.36
10.36
10.36
10.36
10.36
13.54
13.54
13.54
121
140
152
191
216
241
298
362
432
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
3/4 - 10
7/8 - 9
7/8 - 9
4
4
4
8
8
8
8
12
12
25
25
25
25
32
32
35
35
35
11.2
11.2
11.2
11.2
11.2
11.2
14.2
14.2
14.2
15.88
15.88
15.88
15.88
21.29
21.29
21.29
24.46
33.99
9.53
9.53
9.53
9.53
12.70
12.70
12.70
15.88
19.05
Size mm
50
65
80
100
125
150
200
250
300
16
H
G
S
R
N
D
U
Dimensional Data
Size in.
14
3.00
10.63
12.75
23.4
5.00
0.56
18.75
2.00
2.25
0.88
1.375
5/16 x 5/32
5.12
12.89
4.00
11.66
13.75
25.4
5.00
0.56
21.25
16
2.00
2.25
0.88
1.625
3/8 x 3/16
5.65
14.76
18
4.50
12.96
14.75
27.7
6.50
0.81
22.75
16
2.50
2.75
1.00
1.875
1/2 x 3/16
6.37
16.63
20
5.00
13.97
15.75
29.7
6.50
0.81
25.00
20
2.50
2.75
1.00
1.875
1/2 x 3/16
7.12
18.58
24
6.00
16.19
19.00
35.2
6.50
0.81
29.50
1-8
1*
1-8
1*
1-1/8 - 7
1-1/8*
1-1/8 - 7
1-1/8*
1-1/4 - 7
1-1/4*
12
16
16.20
17.3*
18.16
19.2*
20.35
21.4*
22.63
23.6*
27.31
28.3*
20
2.50
3.00
1.00
1.875
1/2 x 3/16
8.67
22.56
350
76
270
324
594
127
14.2
476
51
57
22.4
34.93
7.94 x 3.97
130
327
102
296
349
645
127
14.2
540
16
51
57
22.4
41.28
9.53 x 4.76
144
375
450
114
329
375
704
165
20.6
578
16
64
57
25.4
47.63
12.70 x 4.76
162
422
500
127
355
400
754
165
20.6
635
20
64
57
25.4
47.63
12.70 x 4.76
181
472
600
152
411
483
894
165
20.6
749
1-8
1*
1-8
1*
1-1/8 - 7
1-1/8*
1-1/8 - 7
1-1/8*
1-1/4 - 7
1-1/4*
12
400
411
439*
461
488*
517
544*
575
599*
694
719*
20
64
76
25.4
47.63
12.70 x 4.76
220
573
Size mm
* Wafer valve dimension is the bottom figure. Lug valve dimension is the top figure.
Note: For general dimensions, see page 28.
17
JBolt Circle
KBolt Size
LNo. of Bolts Total
VDepth of Thread
N
H
G
R
N
JBolt Circle
KBolt Size
LNo. of Bolts Total
VDepth of Thread
Dimensional Data
Size in.
30
36
6.50
7.88
21.2
25.0
23.0
27.8
44.2
52.8
34.1
40.5
8.00
10.25
0.69
0.81
36.00
42.75
1-1/4 - 7UNC
1-1/2 - 6UNC
28
32
3.4
4.0
3.7
4.4
1.2
1.5
3.000
3.625
3/4 x 3/8
7/8 x 7/16
11.45
13.86
28.55
34.71
1.750
1.750
165
200
538
635
584
706
1123
1342
866
1029
203
260
17.53
20.57
914
1086
1-1/4 - 7UNC
1-1/2 - 6UNC
28
32
86
102
94
112
30.5
38.1
76.2
92.1
19.05 x 9.53
22.23 x 11.11
291
352
725
882
44.45
44.45
Size mm
750
900
18
F
R
N
JBolt Circle
KStud Size
LNo. of Studs
H
G
Dimensional Data
Size in.
2
2-1/2
3
4
5
6
8
10
12
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
3.94
4.44
4.88
6.00
6.00
6.50
8.06
9.97
10.91
6.75
7.50
8.19
9.88
10.38
11.50
14.19
17.41
20.41
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.00
5.00
5.00
0.408
0.408
0.408
0.408
0.408
0.408
0.533
0.533
0.533
4.27
5.31
4.91
7.03
7.56
9.16
11.72
13.72
16.62
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
1/2
4
4
6
6
6
8
8
8
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
0.44
0.44
0.44
0.44
0.44
0.44
0.56
0.56
0.56
0.625
0.625
0.625
0.625
0.838
0.838
0.838
0.963
1.338
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.750
44
47
47
54
57
57
65
70
82
100
113
124
152
152
165
205
253
277
171
191
208
251
264
292
360
442
518
105
124
137
175
197
222
279
340
409
102
102
102
102
102
102
152
152
152
83
83
83
83
83
83
127
127
127
10.36
10.36
10.36
10.36
10.36
10.36
13.54
13.54
13.54
108
135
125
179
192
233
298
348
422
10
10
10
15
15
15
16
16
15
4
4
6
6
6
8
8
8
12
25
25
25
25
32
32
35
35
35
11.2
11.2
11.2
11.2
11.2
11.2
14.2
14.2
14.2
15.88
15.88
15.88
15.88
21.29
21.29
21.29
24.46
33.99
9.53
9.53
9.53
9.53
12.70
12.70
12.70
15.88
19.05
Size mm
50
65
80
100
125
150
200
250
300
19
JBolt Circle
KStud Size
LNo. of Studs
P
C
F
D
S
H
G
E
Dimensional Data
Size in.
2
2-1/2
3
4
5*
6
8
10
12
1.74
1.86
1.86
2.11
2.24
2.24
2.54
2.74
3.24
3.94
4.44
4.69
5.44
6.38
6.88
8.06
9.97
10.91
6.75
7.50
8.00
9.31
10.75
11.88
14.19
17.41
20.41
4.12
4.88
5.38
6.88
7.75
8.75
11.00
13.38
16.12
4.00
4.00
4.00
4.00
4.00
4.00
6.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
3.25
5.00
5.00
5.00
0.408
0.408
0.408
0.408
0.408
0.408
0.533
0.533
0.533
4.75
5.50
6.00
7.50
8.50
9.50
11.75
14.25
17.00
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
3/4 - 10
7/8 - 9
7/8 - 9
4
4
4
8
8
8
8
12
12
1.00
1.00
1.00
1.00
1.25
1.25
1.38
1.38
1.38
0.44
0.44
0.44
0.44
0.44
0.44
0.56
0.56
0.56
0.625
0.625
0.625
0.625
0.838
0.838
0.838
0.963
1.338
0.375
0.375
0.375
0.375
0.500
0.500
0.500
0.625
0.750
44
47
47
54
57
57
65
70
82
100
113
119
138
162
175
205
253
277
171
191
203
236
273
302
360
442
518
105
124
137
175
197
222
279
340
409
102
102
102
102
102
102
152
152
152
83
83
83
83
83
83
127
127
127
10.36
10.36
10.36
10.36
10.36
10.36
13.54
13.54
13.54
121
140
152
191
216
241
298
362
432
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
3/4 - 10
7/8 - 9
7/8 - 9
4
4
4
8
8
8
8
12
12
25
25
25
25
32
32
35
35
35
11.2
11.2
11.2
11.2
11.2
11.2
14.2
14.2
14.2
15.88
15.88
15.88
15.88
21.29
21.29
21.29
24.46
33.99
9.53
9.53
9.53
9.53
12.70
12.70
12.70
15.88
19.05
Size mm
50
65
80
100
125*
150
200
250
300
20
Series NEI-T
2 to 10 (50 mm to 250 mm)
H
G
R
N
JBolt Circle
KStud Size
LNo. of Lugs
P
C
Dimensional Data
Size in.
2
2-1/2
3
4
6
8
10
1.74
1.86
1.86
2.11
2.24
2.54
2.74
3.94
4.44
4.69
5.44
6.88
8.06
9.97
6.75
7.50
8.00
9.31
11.88
14.19
17.41
4.12
4.88
5.38
6.88
8.75
11.00
13.38
4.00
4.00
4.00
4.00
4.00
6.00
6.00
3.25
3.25
3.25
3.25
3.25
5.00
5.00
0.408
0.408
0.408
0.408
0.408
0.533
0.533
4.75
5.50
6.00
7.50
9.50
11.75
14.25
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
7/8 - 9
4
4
4
8
8
8
12
1.00
1.00
1.00
1.00
1.25
1.38
1.38
0.44
0.44
0.44
0.44
0.44
0.56
0.56
0.625
0.625
0.625
0.625
0.838
0.838
0.963
0.375
0.375
0.375
0.375
0.500
0.500
0.625
44
47
47
54
57
65
70
100
113
119
138
175
205
253
171
191
203
236
302
360
442
105
124
137
175
222
279
340
102
102
102
102
102
152
152
83
83
83
83
83
127
127
10.36
10.36
10.36
10.36
10.36
13.54
13.54
121
140
152
191
241
298
362
5/8 - 11
5/8 - 11
5/8 - 11
5/8 - 11
3/4 - 10
3/4 - 10
7/8 - 10
4
4
4
8
8
8
12
25
25
25
25
32
35
35
11.2
11.2
11.2
11.2
11.2
14.2
14.2
15.88
15.88
15.88
15.88
21.29
21.29
24.46
9.53
9.53
9.53
9.53
12.70
12.70
15.88
Size mm
50
65
80
100
150
200
250
21
Handles
How to Order
(X X X X X - 0 0 X)
XXXXX
Base Part Number
00X
Trim
20
27
5
25
Standard
Corrosion-Resistant
Sanitary
in.
(mm)
Description
10-Position, Standard, CR
2-Position, Standard, CR
10-Position, Sanitary
2-Position, Sanitary
Throttling, Standard, CR
Throttling, Sanitary
Square Nut, Standard
Weight (lb)
1
2
3
2 to 4
5 to 6
(50 to 100) (125 to 150)
24227
24232
22319
22324
24252
22329
23356
2.3
28
15
24228
24233
22320
22325
24253
22330
23357
2.9
8
(200)
10
(250)
12
(300)
24229
24234
22321
22326
24254
22331
23358
6.5
24230
24235
22322
22327
24255
22332
23359
6.5
24231
24236
22323
22328
24256
22333
22360
6.5
16
29
26
16
19
19
M
M
N
12
10
11
15
M
N
16
Screw
Handle
Latch
Spring
Spring Pin
Throttle Plate
Lockwasher
Nut
Set Screw
Throttling Tab
Carriage Bolt
Wing Nut
Screw
Nut
Dimension
Standard
Material
Corrosion-Resistant
Sanitary
Steel
Ductile Iron
Zinc-Plated Steel
Spring Steel
Spring Steel
Zinc-Plated Steel
Steel
Steel
Steel
Zinc-Plated Steel
Steel
Steel
Steel
Steel
Stainless Steel
Ductile Iron
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Bronze
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
22
15.00 (381)
1.13 (28.7)
10
16
19
11.00 (279)
1.07 (27.2)
15
20
5
9.50 (241)
0.85 (21.6)
in.
2 to 4
5 to 6
8 to 12
(mm) (50 to 100) (125 to 150) (200 to 300)
M
N
9.50 (241)
0.87 (22.1)
11.00 (279)
1.07 (27.2)
15.00 (381)
1.13 (28.7)
sq
Material
Ductile Iron
Steel
Steel
Steel
Spring Steel
How to Order
2 to 12 (50 mm to 300 mm)
XXXXX
Base Part Number
Case Material
Gear Material
Actuation
Valve Size
Configuration
Gray Iron
Description
Operator Base No.
Additional Information
Chain Suffix = Length in ft*
Weight lb (kg) with Handwheel
Ductile Iron
Crank
Handwheel
Chainwheel
Square Nut
None
1
3
5
6
9
2 to 4
(50 mm to 100 mm)
5 and 6
(125 mm and 150 mm)
8 (200 mm)
10 (250 mm)
12 (300 mm)
Standard
5
7
8
9
2 to 4
(50 mm to 500 mm)
5 to 6
(125 mm to 150 mm)
8
(200 mm)
10
(250 mm)
12
(300 mm)
22622
22622
22623
22623
22623
4462-XXX
7.8 (3.5)
4462-XXX
7.8 (3.5)
4462-XXX
17.2 (7.8)
4462-XXX
17.2 (7.8)
4462-XXX
18.6 (8.4)
X
Gear Operator
Assembly Part Number
09
03
05
06
Description
Operator Base No.
Additional Information
Chain Suffix = Length in ft*
Weight (lb (kg) with handwheel)
Valve Size
14
(350 mm)
16
(400 mm)
18 to 20
(450 mm to 500 mm)
24
(600 mm)
30
(750 mm)
36
(900 mm)
2060229
2060230
2060231
2060232
2060332
2060334
4462-XXX
19.0 (8.6)
4463-XXX
22.0 (10.0)
4463-XXX
33.0 (15.0)
19932-XXX
43.0 (19.5)
4463-XXX
107.0 (48.5)
19932-XXX
137.0 (62.1)
in.
(mm)
Gear Ratio
Turns/90 Degree
Rotation
2 to 6
8 to 12
14 to 16
18 to 20
24
30
36
(50 to 150)
(200 to 300)
(350 to 400)
(450 to 500)
(600)
(750)
(900)
30:1
48:1
48:1
57:1
60:1
316:1
240:1
7-1/2
12
12
14-1/4
15
79
60
46 ft-lb
65 ft-lb
65 ft-lb
98 ft-lb
164 ft-lb
104 ft-lb
174 ft-lb
23
N
E
E
H
G
J
J
M1
valves
R
Dimensional Data
Size in.
M1
2 to 6
8 to 10
12
14
16
18 to 20
24
30
36
1.80
2.88
2.88
2.88
2.88
3.12
3.44
4.56
5.88
1.80
2.88
2.88
2.88
2.88
3.12
3.44
8.88
9.12
3.80
3.38
3.38
5.12
5.88
7.12
5.28
4.52
4.56
1.64
2.50
2.50
2.50
2.50
3.00
3.63
4.63
6.25
1.59
2.88
2.88
2.88
2.88
3.12
3.25
4.63
5.88
4.97
6.50
6.50
6.50
6.50
7.69
8.38
11.08
14.50
0.90
1.38
1.38
1.38
1.38
1.50
1.63
2.00
2.31
2.30
3.00
3.00
3.00
3.00
3.25
3.56
4.44
5.00
0.623
0.623
0.623
0.623
0.623
1.000
1.000
1.000
1.000
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.25
0.19
0.19
0.19
0.19
0.25
0.25
0.38
0.39
0.39
6.00
6.36
7.38
8.00
4.80
4.32
5.02
6.56
11.00
11.25
10.91
8.65
10.19
6
6
8
12
18
18
24
18
24
4.80
4.32
4.32
5.88
7.69
8.94
7.59
7.59
8.13
4.10
3.72
3.72
5.25
6.38
7.63
5.91
6.28
6.44
3.50
3.50
3.50
5.81
9.12
9.12
11.00
9.12
11.00
4.80
4.80
4.80
5.75
8.69
8.69
12.25
8.69
12.25
4.60
4.12
4.12
5.69
6.75
8.00
6.16
5.41
5.44
46
73
73
73
73
79
87
116
149
46
73
73
73
73
79
87
226
232
97
86
86
130
149
181
134
115
116
42
64
64
64
64
76
92
118
159
40
73
73
73
73
79
83
118
149
126
165
165
165
165
195
213
281
368
23
35
35
35
35
38
41
51
59
58
76
76
76
76
83
90
113
127
16
16
16
16
16
25
25
25
25
25
25
25
32
32
32
32
32
32
4.8
4.8
4.8
4.8
6.4
6.4
9.7
9.9
9.9
152
162
187
203
122
110
128
167
279
286
277
220
259
152
152
203
305
457
457
610
457
610
122
110
110
149
195
227
193
193
207
104
94
94
133
162
194
150
160
164
89
89
89
148
232
232
279
232
279
122
122
122
146
221
221
311
221
311
117
105
105
145
171
203
156
137
138
Size mm
50 to 150
200 to 250
300
350
400
450 to 500
600
750
900
* DT-1 gear operator dimensions became standard gear operator mid-year 2000 (for old style DT-3, consult Cameron).
24
STEM EXTENSIONS
Fabricated from carbon steel, stem extensions are contained
in a tubular housing. Lengths from 3 to 16 ft are fabricated
to order. Torsional deflection of lengths greater than 16 ft
require special design consideration and are available by
special order only.
How to Order
2 to 12 (50 mm to 300 mm)
XXXXX
Base Part Number
Description
Carbon Steel
in.
(mm)
XXX
Length in. (mm)
XXX00
Length in. (mm)
2 to 4
(50 to 500)
5 to 6
(125 to 150)
8
(200)
10
(250)
12
(300)
14
(350)
16
(400)
18 to 20
(450 to 500)
24
(600)
23318
23319
23320
23321
23322
24529
24530
24531
24532
* Note: Consult Cameron for 30 (750 mm) and 36 (900 mm) valve stem extensions.
25
Marking
Each valve is positively identified by marking and tagging per
MSS-SP-25.
Vacuum Rating
DEMCO butterfly valves will seal against 10 microns of
vacuum (29.9 inHg). For reduced torque and extended seat
life, 50-psi discs are recommended for the dry service
conditions found in many vacuum applications.
End-of-Line Service
Lug body valves can be used in end-of-line service, with
downstream piping removed. Only weld neck or socket
flanges can be used for this service. Since upstream pressure
is excluded between the flange and the seat face by the
exclusive DEMCO flange seal, there is no effective force to
slide the seat downstream. DEMCO lug butterfly valves are
recommended for liquid service up to 200 psi with
downstream piping removed.
Lug body valves are recommended for the isolation of
pumps, control devices or other system components that
may need to be removed for repair or replacement.
Lug valves also are suitable for installation at points from
which piping expansions may proceed. Such valves normally
are blanked with blind flanges to protect the exposed seats
until new piping is attached.
Actuation
Positive latch handles, worm gear operators and automatic
actuators are available and interchangeable on the DEMCO
valve.
The DEMCO top flange is dimensionally compatible with
other competitive butterfly valves. With the optional utility
top stem, the DEMCO valve interchanges directly with
competitive valves, allowing valve replacement without the
need for new actuation.
Upstream
Disc
26
l
ng
A
e
re
eg
re
su
pe
es
Pr
D
p
ro
gh
u
ro
Th
Fu
n
pe
ll-
ve
l
Va
ze
es
ch
In
0.217
Si
15 psi x
e
lv
Va
= 0.052 psi
62.4
To determine pressure drop for any fluid,
multiply value obtained from the nomograph
by the quotient of the fluid density, in lb/cf,
divided by 62.4.
Gas
Liquid
27
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
14
(350)
16
(400)
18
(450)
20
(500)
A Schedule 40
Flange ID*
(Except Slip-On)
(Slip-On)
2.07
(53)
2.44
(62)
2.47
(63)
2.94
(75)
3.07
(78)
3.57
(91)
4.03
(102)
4.57
(116)
5.05
(128)
5.66
(144)
6.07
(154)
6.72
(171)
7.98
(203)
8.72
(221)
10.02
(255)
10.88
(276)
12.00
(305)
12.88
(327)
13.25
(337)
14.14
(359)
15.25
(387)
16.16
(410)
17.25
(438)
18.18
(462)
19.25
(489)
20.20
(513)
2.65
(67)
3.62
(92)
4.12
(105)
3.12
(79)
3-3/4
6-3/4
6-5/8
2-1/4
1.467
(37)
3.25
(83)
2.33
70%
4
8
5/8 - 11
5
1-1/2
3.15
(80)
4.12
(105)
4.87
(124)
3.62
(92)
4-1/8
7-3/8
7-3/16
2-13/16
2.144
(54)
3.62
(92)
3.92
82%
4
8
5/8 - 11
5-1/2
1-1/2
3.78
(96)
5.00
(127)
5.37
(136)
4.25
(108)
4-1/4
7-3/8
7-1/8
3-5/16
2.743
(70)
3.75
(95)
5.93
80%
4
8
5/8 - 11
5-1/2
1-3/4
4.78
(121)
6.18
(157)
6.87
(174)
5.25
(133)
4-3/4
8-1/8
7-7/8
4-3/16
3.601
(91)
4.00
(102)
10.01
79%
8
16
5/8 - 11
5-3/4
1-3/4
5.84
(148)
7.31
(186)
7.75
(197)
6.31
(160)
5-1/8
9-1/4
8-15/16
5-1/16
4.582
(116)
4.12
(105)
14.98
73%
8
16
3/4 - 10
6-1/2
2
7.03
(179)
8.50
(216)
8.75
(222)
7.46
(189)
5-3/8
9-1/4
8-7/8
6-1/16
5.624
(142.8)
4.25
(108)
22.09
76%
8
16
3/4 - 10
6-1/2
2-1/4
8.96
(228)
10.62
(270)
11.00
(279)
9.43
(240)
6-1/16
10-9/16
10-3/16
7-15/16
7.428
(189)
4.81
(122)
39.43
79%
8
16
3/4 - 10
7
2-1/4
11.09
(282)
12.75
(324)
13.37
(340)
11.56
(294)
6-5/8
10-3/4
10-5/16
10
9.382
(238)
5.12
(130)
61.52
78%
12
24
7/8 - 9
7-1/2
2-1/2
B Seal Diameter
C Raised Face Diameter
D Valve Body Diameter
E Seat OD
F End-to-End
G Seat ID
H Disc Chord**
J Outside-toASME 150
Outside
Resilient Seated sq in.
Throughput
Area
% Schedule 40 Pipe
Number of Studs
Number of Capscrews
Size of Studs or Capscrews Threads per in.
Length of Studs (in.)
Length of Capscrews (in.)
13.09
14.14
16.16
18.18
20.20
(332)
(359)
(410)
(462)
(513)
15.00
16.25
18.50
21.00
23.00
(381)
(413)
(470)
(533)
(5840)
16.12
17.20
19.27
21.43
23.60
(409)
(437)
(489)
(544)
(599)
13.56
15.14
17.04
19.06
21.08
(344)
(385)
(433)
(484)
(535)
7-5/8
7-1/2
9
9-13/16 10-11/16
12-1/4
13
14
15-7/16 16-5/16
11-13/16
11-15/16 13-5/32 15-7/32 17-5/32 19-5/32
11.35
12.86
14.72
16.61
18.53
(288)
(327)
(374)
(422)
(471)
5.75
5.75
6.87
7.56
8.31
(146)
(146)
(174)
(192)
(211)
89.54
111.2
150.5
186.1
80%
82%
85%
83%
87%
12
12
16
16
20
24
24
32
32
40
7/8 - 9
1-8
1-8
1-1/8 - 7 1-1/8 - 7
8-1/4
8-1/4
10
10-1/2
11-3/4
2-1/2
3-1/4
3-1/2
4
-
* DEMCO butterfly valves are designed to seal without flange gaskets against flange faces with IDs between slip-on flange bore and
schedule 40 weld neck flange bore.
** 2 to 12 (50 mm to 300 mm) disc will open into schedule 80 pipe ID.
B Seal Diameter
C Raised Face Diameter
D Valve Body Diameter
E Seat OD
F End-to-End Weld End
ASME
G Seat ID
H Disc Chord
J Outside-to-Outside
ASME
Number of Studs
Number of Capscrews
Size of Capscrews Threads per in.
Length of Studs (in.)
Length of Capscrews (in.)
Throughput
Area
sq in.
% std. pipe
24
(600)
30
(750)
36
(900)
23.25
(591)
24.25
(616)
27.25
(692)
28.23
(717)
25.49
(647)
18.00
(457)
23-1/4
22.57
(573)
9.75
(248)
20
40
1-1/4 - 7
12-1/2
4
352.4
88%
29.25
(743)
30.00
(762)
-
35.25
(895)
35.94
(913)
-
34.05
(865)
31.47
(799)
16.75
(425)
29-5/16
28.67
(728)
10.75
(273)
*
56
1-1/4 - 7
*
5
546
81%
40.49
(1028)
37.63
(956)
18.63
(473)
35-5/16
34.70
(881)
12.63
(321)
**
64
1-1/2 - 6
**
***
800
82%
28
J
D
C
E
B
G
A
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
145
115
95
70
53
27
17
9
6
225
175
135
105
83
42
26
15
10
325
260
215
160
125
63
38
22
15
590
510
410
305
235
120
73
42
28
1125
1000
830
625
490
250
155
88
60
1950
1650
1350
1030
800
410
250
145
98
3250
2725
2200
1750
1300
700
420
250
170
7500
6050
5000
4050
3100
1600
1000
550
380
10,000
8100
6700
5100
4100
2200
1300
750
500
18
(450)
20
(500)
24
(600)
30
(750)
36
(900)
13,600
11,500
9500
7100
5100
2650
1700
900
650
18,000
14,300
12,100
9200
7100
3700
2300
1250
900
22,600
18,000
15,000
11,500
8700
4600
2800
1600
1125
30,000
25,000
21,000
16,500
11,750
6100
3800
2200
1500
47,000
38,000
31,500
25,500
18,000
9700
6000
3500
2300
70,000
60,000
48,000
39,500
28,000
15,000
9200
5300
3500
Water Hammer
Water hammer is a series of shocks in a piping system
caused by rapidly stopping the flow of fluid in that system.
DP x 62.4
Q = CV x
5000
4300
3600
2750
2150
1150
670
390
260
16
(400)
Where:
Q = gal/min of flow through the valve
DP = psi pressure drop across the valve
DP =
CV2 x 62.4
Sample Computations
What is the flow rate of water at ambient temperature
through a 4 (100 mm) butterfly valve that is 70 degrees
open when the pressure drop across the valve is 0.5 psi?
(Density of water at 68 F is 62.4 lb/cu ft.)
DP x 62.4
Q = CV x
0.5 x 62.4
D
= 305 x
0.707
Q = 215.6 gal/min
DP =
= 305 x
time seconds =
0.14Q
S (P)
Where:
Q = flow in gal/min
S = upstream pipe size in sq ft
P = pressure rating of the valve in psi
Generally, a closing time of six to eight seconds is sufficient
to eliminate water hammer.
Q2 x D
CV2 x 62.4
(2000)2 x 55
(3250)2 x 62.4
DP = 0.33 psi
29
Example:
= cavitation constant
(approximately 0.35 for butterfly valves)
P1
PV
30
TORQUE Data
Butterfly Valve Torques (Except Series NEI-T)** Normal Wet Opening in-lb
Valve Size
in.
(mm)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
30
(750)
36
(900)
225
132
108
72
326
192
108
72
510
300
192
90
765
450
264
108
1190
700
450
144
1530
900
550
180
2550
1500
1000
350
4125
2650
1800
700
7000
4500
3000
1160
7740
4500
1660
10,280
6500
2800
12,600
8400
3400
15,600
10,800
5000
30,000
20,000
8400
50,000
30,000
-
67,500
50,000
-
in.
(mm)
2
(50)
2-1/2
(65)
3
(80)
4
(100)
5
(125)
6
(150)
8
(200)
10
(250)
12
(300)
14
(350)
16
(400)
18
(450)
20
(500)
24
(600)
30
(750)
36
(900)
338
198
162
144
489
288
162
144
765
450
288
180
1148
675
396
216
1785
1050
675
288
2295
1350
825
360
3825
2250
1500
700
6188
3975
2700
1400
10,500
6750
4500
2320
11,610
6750
3320
15,420
9750
5600
18,900
12,600
6800
23,400
16,200
10,000
45,000
30,000
16,800
* When line velocity exceeds 15 ft/sec, dynamic torque exceeds opening torque.
** Consult Cameron for the torque requirement of the Series NEI-T butterfly valve.
31
NE-C
NF-C
14 to 24
NF-C
30 and 36
NE-I
NE-D
Lug
Lug
Wafer/Lug
Wafer
Wafer
Wafer
NE-I
Sanitary
NEI-T
Wafer/Lug
Wafer/Lug
Wafer
Wafer
Wafer
C/F
Lug
Wafer/Lug
Wafer/Lug
Wafer/Lug
Wafer
Wafer/Lug
Wafer/Lug
Wafer
Wafer/Lug
Wafer/Lug
Wafer/Lug
Wafer
Discs
Ductile Iron/ Nickel-Plated
Ductile Iron/ PVF-Coated
Aluminum
Bronze
316 SS
Monel **
Alloy 20, 29 NI-20 Cr
Hastelloy C **
61 NI-17 Mo-17 Cr
A536 (65-45-12)
A536 (65-45-12)
B148 (954)
B148 (955)
A743 (CF8M)
A494 (M30C)
A743 (CN-7M)
A494 (CW-2M)
QQ-S-764-B
AMS 5648 B
AMS 5643
B164 (Class A)
Stems
416 SS
316 SS
17-4 PH SS
Monel **
Seats vary. See pages 9, 10 and 11 for seat material description and part
number scheme for available options for different valve series.
32
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
ETM-30230
Acetaldehyde
Acetic Acid Crude
Acetic Acid Pure
Acetic Acid 10%
Acetic Acid 80%
Acetic Acid Anhydrite
Acetone
Acetophenone
Acetylene
Acrylonitrile
Air (Dry)
Alcohol Amyl
Alcohol Butyl
Alcohol Ethyl
Alcohol Methyl
Alum Ammonium
Alum Chrome
Alum-Potassium
Alumina
Aluminum Chloride
Aluminum Fluoride
Aluminum Hydroxide
Aluminum Sulfate
Amines
Ammonia, Anhydrous
Ammonia Solutions
Ammonium Chloride 50% 180 F (82 C)
Ammonium Hydroxide
Ammonium Nitrate 5% 60 F (16 C)
Ammonium Phosphate
Ammonium Sulfate 90% 180 F (82 C)
Amyl Acetate
Amyl Chloride
Aniline 90% 70 F (21 C)
Aniline Dyes
Antimony Chloride
Arsenic Acid
ASTM Oil #1
ASTM Oil #3
ASTM Ref. Fuel A
ASTM Ref. Fuel B
ASTM Ref. Fuel C
Asphalt
Barium Carbonate 60 F (16 C)
Barium Chloride
Barium Hydroxide
Barium Sulfate 60 F (16 C)
Barium Sulfide
416 SS
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
Nickel-Plated
Ductile Iron
Rating Interpretation
U
U
U
U
U
U
G
U
G
G
E
F
F
U
U
U
U
U
G
U
U
U
U
U
F
F
U
F
F
U
U
F
F
F
F
U
U
F
F
F
F
F
E
U
U
F
U
F
U
U
U
U
U
U
G
U
E
G
E
G
G
G
G
U
G
F
G
F
G
G
G
F
G
G
G
G
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
G
G
G
F
G
G
G
E
E
E
G
E
E
E
G
E
E
G
E
G
E
E
E
E
E
E
G
G
E
E
G
E
F
F
F
F
F
E
E
E
E
E
E
E
E
E
G
G
G
G
G
E
G
G
F
U
G
G
G
G
G
E
G
G
E
E
E
E
E
E
G
G
G
G
F
U
U
F
U
U
U
E
U
E
E
E
E
E
E
E
G
G
U
G
U
U
U
U
U
U
U
U
G
E
U
F
U
E
E
G
G
G
E
G
F
U
G
U
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
U
E
E
E
E
E
U
E
E
E
E
E
E
G
U
E
E
E
E
E
E
E
E
E
E
E
E
-
G
E
U
U
F
U
E
E
E
E
E
E
E
E
E
E
E
E
F
E
F
E
E
E
E
E
E
G
G
G
G
G
U
U
U
G
U
E
F
F
G
F
G
G
G
E
G
G
G
E
U
G
G
E
U
E
E
E
U
U
U
U
G
E
E
E
E
G
G
G
E
E
E
E
E
F
E
E
E
E
E
U
F
F
E
F
G
G
E
G
G
G
F
G
G
G
E
U
G
G
E
E
E
E
E
U
U
U
F
G
E
G
U
G
F
F
E
E
E
E
E
U
E
E
E
E
E
U
F
F
E
G
G
G
E
F
G
F
G
G
G
E
U
U
U
E
E
G
E
E
U
U
U
F
G
E
G
U
G
F
F
E
E
U
F
U
U
E
U
E
G
E
G
F
G
G
E
G
E
G
G
E
U
U
U
E
G
E
E
E
U
F
G
E
E
E
E
E
E
E
E
E
E
-
E
F
E
E
U
G
E
F
G
E
G
E
E
E
G
E
F
G
G
E
E
E
E
E
G
U
F
G
U
U
U
U
U
U
E
E
E
E
-
U
F
F
F
U
G
F
G
G
F
F
E
G
G
E
U
U
E
U
G
G
G
U
U
U
G
U
U
U
U
U
U
E
G
U
G
U
U
U
G
E
E
G
G
U
U
G
F
G
G
U
U
U
G
E
E
E
E
E
E
-
33
34
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
ETM-30230
Beer (Beverage)
Beet Sugar Liquors
Benzaldehyde
Benzene (Benzol) 70 F (21)
Benzoic Acid 5% 70 F (21)
Black Sulfate Liquor
Bleaching Powder Wet
Borax (Sodium Borate)
Boric Acid 5% 200 F (93 C)
Brine (Acid)
Brine Chlorinated
Bromine Gas
Bromine Water
Butadiene
Butane Butylene
Butyl Acetate
Butyric Acid 5% 70 F (21 C)
Calcium Bisulfite
Calcium Carbonate 60 F (16 C)
Calcium Chlorate 20% 160 F (71 C)
Calcium Chlorate 20% 160 F (71 C)
Calcium Chloride
Calcium Hydroxide 50% 175 F (79 C)
Calcium Hypochloride
Calcium Sulfate 90% 60 F (16 C)
Calgon
Caliche Liquor
Cane Sugar Liquors
Carbon Dioxide (Dry)
Carbon Disulfide
Carbon Tetrachloride (Dry)
Carbonic Acid
Caster Oil
Caustic Solutions 34% 200 F (93 C)
China Wood Oil (Tung)
Chlorine Gas Dry 70 F (21 C)
Chlorobenzene 90% 70 F (21 C)
Chloroform 70 F (21 C)
Chlorosulfonic Acid 10%
Chocolate
Chromic Acid 5% 70 F (21 C)
Citrus Acid 5% 150 F 66 C)
Coconut Oil (Food)
Coffee (Food)
Copper Chromate
Copper Sulfate 80% 175 F (79 C)
Corn Syrup
Cottonseed Oil
Creosol
Creosote
Cresylic Acid
Crude Oil
Cyclohexane
Dextrose (Food)
416 SS
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
Nickel-Plated
Ductile Iron
Rating Interpretation
U
F
F
F
U
F
U
U
U
U
U
U
F
G
G
U
U
F
F
F
F
F
U
F
F
U
U
U
G
U
F
U
F
F
U
U
U
U
U
F
G
U
E
U
G
F
U
E
E
E
E
G
G
G
F
F
U
U
G
E
E
G
G
G
G
G
E
G
E
E
E
G
G
G
G
F
E
G
U
G
F
U
U
G
E
F
E
G
G
E
U
E
E
E
E
E
E
G
E
E
G
U
U
U
E
E
E
E
E
G
E
E
G
E
G
E
E
E
E
E
E
G
E
E
E
E
G
G
E
G
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
E
G
G
G
F
F
E
E
E
G
U
E
G
G
G
E
G
G
G
E
E
E
F
E
G
G
E
F
F
G
G
G
F
E
E
E
G
E
G
-
U
F
E
E
G
F
U
U
F
G
G
G
E
E
G
U
G
U
U
E
U
E
E
E
G
G
G
U
F
G
G
G
G
U
F
G
F
U
E
G
G
E
G
-
E
E
E
E
E
E
E
E
E
U
U
E
E
E
G
E
E
G
E
G
E
E
E
E
E
E
E
E
E
E
G
E
E
U
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
-
E
E
G
E
E
E
E
E
E
E
E
U
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
F
E
E
E
E
E
E
F
G
E
-
G
E
U
U
U
G
G
G
E
E
U
U
F
G
U
U
E
E
E
G
U
F
E
E
E
E
U
U
G
G
F
E
U
U
U
U
E
U
E
E
E
E
E
U
G
U
E
U
E
G
E
U
U
U
G
E
E
E
G
U
G
G
U
U
E
E
E
E
E
E
U
F
E
E
E
G
U
E
E
F
E
U
U
U
U
U
U
E
F
E
E
F
U
U
U
U
-
E
G
U
U
U
G
F
E
E
G
U
G
G
G
U
U
E
E
E
E
E
E
E
G
U
E
E
F
G
G
U
U
U
E
E
F
E
E
G
U
F
U
U
-
E
E
U
G
E
E
E
E
G
E
E
G
E
U
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
U
E
E
E
E
E
G
F
E
E
E
E
-
E
E
U
U
G
E
E
E
G
U
U
U
U
G
U
E
U
E
G
G
U
F
U
U
U
U
E
F
E
E
E
F
U
U
U
U
U
-
G
G
U
U
U
F
F
G
G
U
U
U
U
U
U
U
U
U
E
G
U
E
G
U
U
U
U
U
U
U
F
U
E
E
U
U
U
U
U
U
-
G
U
U
G
G
U
G
U
E
G
F
G
G
F
G
G
F
U
E
G
U
E
-
416 SS
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
Diacetone
Diamylamine
Dichlorethene
Diesel Fuels
Diethyl Amine
Dimethane Sulfide
Dowtherms
Drilling Mud
Ethers
Ethyl Acetate
Ethyl Chloride 5% 60 F (16 C)
Ethyl Glycol
Ethylene Dichloride
Ethylene Oxide
Ferric Chloride
Ferric Nitrate (pH 7+) 5% 60 F (16 C)
Ferric Sulfate 5% 60 F (16 C)
Ferrous Sulfate
Fluorine 70 F (21 C)
Fluorosilicic Acid
Formaldehyde 70 F (21 C)
Formic Acid 5% 150 F (66 C)
Freon 11
Freon 12
Freon 22
Freon 113
Freon 114
Fructose
Fruit Juices (Food) 70%
Fuel Oil
Furfural
Gallic Acid 5% 200 F (93 C)
Gasohol
Gasoline Regular
Gasoline Unleaded
Gelatin (Food)
Glucose
Glycerine/Glycerol 70 F (21 C)
Heptane
Hexane
Hydraulic Oils
Hydrobromic Acid 200 F (93 C)
Hydrochloric Acid 10% 60 F (16 C)
Hydrochloric Acid 20% 60 F (16 C)
Hydrochloric Acid 35% 60 F (16 C)
Hydrocyanic Acid
Hydrofluoric Acid 48%
Hydrofluoric Acid 60%
Hydrofluoric Acid 100%
Hydrofluosilicic Acid 5% 70 F (21 C)
Hydrogen
Hydrogen Peroxide 90%
Hydrogen Sulfide Dry
Hydrogen Sulfide Wet
Nickel-Plated
Ductile Iron
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
U
F
U
E
F
G
G
U
F
F
G
U
G
U
U
U
F
U
U
U
U
F
F
F
F
F
U
F
F
U
F
G
F
U
U
F
F
F
F
U
U
U
U
U
U
U
U
U
F
U
F
F
E
E
E
E
G
G
E
G
U
G
U
F
G
G
E
E
E
E
E
U
E
E
G
E
E
U
F
E
G
G
G
U
U
U
U
F
U
U
G
G
F
F
F
E
E
G
E
E
E
E
G
E
E
E
G
G
U
G
E
G
F
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
U
U
U
U
G
U
U
U
G
E
G
E
G
G
E
G
E
E
G
E
G
E
G
G
U
F
E
G
G
G
G
E
E
E
E
E
E
E
G
G
E
E
G
G
G
G
E
U
F
U
U
F
F
U
U
G
E
G
G
F
E
E
G
G
E
G
G
G
G
E
E
G
U
U
U
U
U
U
F
E
G
E
E
E
E
E
U
E
G
G
E
E
G
E
G
E
E
E
U
U
U
U
U
U
U
U
E
F
U
F
F
E
G
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
U
U
U
U
E
F
F
F
G
E
G
G
E
E
E
E
E
E
U
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
-
U
F
E
U
F
F
E
E
E
U
E
E
E
E
E
E
G
E
E
E
E
E
U
F
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
G
E
E
E
E
U
G
U
E
G
U
E
U
U
E
E
U
U
E
E
E
E
G
E
F
G
G
G
U
G
G
E
G
U
G
U
G
U
E
E
E
E
E
G
U
F
F
F
G
U
G
U
G
E
U
F
-
U
F
U
F
F
G
F
U
U
G
G
U
U
G
E
E
E
F
G
E
G
G
G
G
E
F
U
G
E
E
E
G
G
F
U
G
G
G
G
U
U
U
G
E
U
-
U
F
F
F
G
E
U
U
G
E
U
U
G
E
E
G
E
E
E
E
U
E
E
F
F
F
U
G
G
E
E
E
G
G
E
E
G
G
G
E
E
G
U
E
E
G
G
G
U
U
G
E
U
U
E
E
F
U
G
E
F
U
E
E
E
E
G
E
E
G
U
U
G
F
E
E
U
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
F
E
E
G
G
G
E
U
U
F
G
F
G
G
E
U
F
E
E
E
E
F
E
U
U
E
U
U
E
G
U
F
G
U
U
U
E
E
E
U
U
U
E
G
G
E
E
E
F
E
G
U
G
F
U
G
U
U
G
E
U
E
E
E
E
G
F
E
U
G
U
U
E
U
E
E
E
U
U
U
E
G
G
E
G
U
G
U
ETM-30230
Rating Interpretation
U
E
U
E
U
G
U
U
G
E
E
F
G
F
F
F
F
E
U
U
E
G
E
E
E
E
G
U
G
G
F
35
36
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
ETM-30230
Iodine Solution
Iso Octane
Isopropyl Alcohol
Isopropyl Ether
Kerosene
Lacquer Solvents
Lactic Acid 5% 70 F (21 C)
Lard Oil 70 F (21 C)
Lemon Oil
Linseed Oil
Lubricating Oil
Magnesium Chloride 4% 75 F (24 C)
Magnesium Hydroxide
Magnesium Sulfate 5% 120 F (49 C)
Mecuric Chloride 3% 60 F (16 C)
Mecuric Cyanide
Mercurous Nitrate (pH 7+)
Mercury
Methyl Acetate
Methyl Acetone
Methyl Cellosolve
Methyl Chloride
Methyl Ethyl Ketone (MEK)
Milk (Food)
Mineral Oil
Molasses (Food)
Naphtha
Naphthalene
Natural Gas (Methane)
Nickel Ammonium Sulfate
Nickel Chloride
Nickel Sulfate 10% 60 F (16 C)
Nitric Acid 10% 70 F (21 C)
Nitric Acid 30% 70 F (21 C)
Nitric Acid 60% 175 F (79 C)
Nitric Acid 70%
Nitrobenzene
Oils and Fats
Oils, Fish
Olecic Acid 100 F (38 C)
Oleum (Fuming Sulfuric Acid)
Oxalic Acid
Oxygen
Ozone
Palmitic Acid
Perchlorethylene
Petroleum Refined
Petroleum Sour
Phenol
Phosgene
Phosphoric Acid 10% 70 F (21 C)
Phosphoric Acid 25% 70 F (21 C)
Phosphoric Acid 75% 70 F (21 C)
Phosphorous Oxychloride
416 SS
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
Nickel-Plated
Ductile Iron
Rating Interpretation
U
F
F
F
E
F
U
G
U
F
E
F
F
F
U
U
U
E
F
F
F
G
E
U
F
U
F
F
G
U
U
U
U
U
U
U
U
E
U
U
U
U
E
U
U
F
G
U
U
U
U
U
U
U
E
E
E
E
E
F
F
E
E
F
E
G
U
E
G
E
E
G
E
U
U
E
E
E
U
E
G
F
U
F
E
G
G
G
G
F
U
U
-
U
E
E
E
E
E
G
E
E
E
E
G
E
E
F
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
G
G
G
G
E
E
E
G
F
G
E
E
E
E
E
G
E
E
G
G
G
-
U
E
E
E
E
E
G
G
E
E
E
G
G
E
U
U
U
E
E
G
F
E
G
G
F
G
G
U
U
U
U
G
G
G
F
E
G
G
E
G
E
F
F
F
-
U
E
E
E
E
E
U
G
E
E
E
F
G
E
U
U
U
U
E
E
E
E
U
G
U
G
G
E
U
U
G
U
U
U
U
E
F
G
F
E
G
G
E
F
G
U
U
U
-
U
E
E
E
E
E
E
E
E
E
E
E
E
E
F
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
G
G
G
G
E
E
E
E
G
G
E
E
E
G
E
G
G
-
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
G
E
G
G
E
E
E
G
F
-
E
E
E
U
E
E
E
E
E
E
E
E
F
E
E
E
E
U
E
E
G
E
E
E
E
U
U
U
U
F
E
F
E
E
E
E
E
E
E
E
E
E
-
F
E
G
G
E
U
G
E
G
E
E
E
G
E
E
G
F
E
U
U
U
U
U
E
E
G
U
E
E
E
U
U
U
U
U
E
G
F
U
G
G
U
E
F
E
F
U
G
G
F
U
-
U
G
F
F
G
U
E
F
F
G
F
E
E
E
E
F
F
E
U
U
U
U
U
E
G
E
U
U
E
E
E
E
G
F
U
U
U
E
G
U
G
E
F
G
U
G
U
U
G
G
G
-
G
G
E
F
U
U
E
U
G
G
E
E
E
E
F
E
U
U
U
U
U
G
U
U
E
E
E
E
E
U
U
U
F
G
U
G
E
E
F
U
E
E
U
U
G
G
G
-
E
E
E
U
E
U
E
E
E
E
E
E
E
E
F
E
U
U
G
U
E
E
E
E
E
E
E
E
E
E
E
G
U
U
G
E
E
E
E
G
E
E
G
G
G
E
E
G
-
G
U
E
U
U
U
G
U
U
U
E
E
E
E
G
E
G
G
F
E
U
U
E
U
U
U
E
E
G
G
U
U
U
U
U
U
G
E
E
G
U
U
U
U
G
E
E
-
F
U
E
U
U
U
G
U
U
E
G
G
E
E
U
U
U
U
U
U
U
U
F
E
G
U
U
U
U
U
U
G
U
F
U
U
U
U
F
U
U
-
G
G
E
U
E
E
E
G
E
E
F
E
U
U
E
G
E
U
U
U
U
U
E
E
G
U
F
G
G
G
F
E
G
F
-
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
ETM-30230
416 SS
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
Nickel-Plated
Ductile Iron
Rating Interpretation
U
U
U
F
F
F
U
F
U
U
F
U
G
U
U
G
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
U
G
G
G
G
G
E
E
F
G
E
F
F
F
G
F
G
F
F
U
G
G
G
G
G
G
G
U
U
G
F
G
G
F
U
U
U
U
U
G
G
G
G
E
E
G
E
E
E
E
E
G
E
E
E
E
E
E
E
E
G
G
E
E
G
F
G
E
G
E
E
E
E
E
E
E
E
E
E
G
E
E
G
U
U
U
U
G
G
U
G
G
E
G
G
E
F
E
G
E
G
E
G
G
E
E
U
G
G
E
G
F
G
G
G
G
G
G
G
G
E
E
G
U
E
F
U
U
U
U
F
E
U
U
F
F
E
U
E
E
E
E
G
E
E
G
G
G
E
U
F
F
F
U
U
U
G
G
U
F
G
G
U
E
G
F
U
F
U
U
U
U
U
U
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
G
G
E
E
E
E
E
E
E
E
E
E
E
E
G
G
U
U
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
U
G
E
E
E
E
E
E
E
E
E
F
E
E
E
U
E
G
E
E
E
E
E
E
G
G
G
F
F
G
G
G
E
E
E
E
E
U
U
G
U
U
U
U
U
U
U
U
U
U
U
E
E
E
G
E
E
E
G
G
G
F
E
E
G
U
E
G
E
E
E
E
E
E
F
U
U
U
U
G
G
G
G
E
E
E
E
U
U
G
F
G
U
G
U
U
U
U
U
U
E
E
E
E
G
G
G
G
G
F
E
E
E
E
U
E
U
G
E
E
E
E
G
E
E
G
U
E
E
G
G
E
E
E
E
E
U
U
G
G
E
U
F
U
E
E
G
U
G
E
G
G
U
E
E
G
E
E
E
G
E
E
E
E
G
E
E
U
E
U
E
E
E
E
E
E
G
G
F
U
E
E
E
E
E
E
E
E
E
U
U
E
G
G
G
E
E
E
E
G
G
G
E
F
E
G
E
E
E
E
E
G
E
U
U
E
G
U
E
E
E
G
E
E
E
E
G
E
E
G
G
G
E
E
E
E
E
E
E
E
G
U
G
U
G
F
E
G
U
U
U
U
U
U
U
G
U
E
E
G
E
G
G
U
F
F
F
U
F
E
G
E
E
E
E
G
E
E
G
F
F
G
G
G
E
E
G
G
G
U
U
G
U
U
G
G
U
U
U
U
U
-
U
E
E
E
E
E
E
U
E
E
E
E
G
G
U
E
U
U
F
F
F
U
-
37
316 SS
Monel*
Aluminum
Bronze
Alloy 20
Hastelloy C*
PVF
Buna-N
Neoprene
Hypalon*
FKM
EPDM
Natural Rubber
ETM-30230
Tall Oil
Tannic Acid 150 F (66 C)
Tar
Tartaric Acid 150 F (66 C)
Toluol and Toluolene
Toluene Sulfomic Acid
Transformer Oil
Tributyl Phosphate
Trichloroacetic Acid
Trichloroethylene
Triethinolamine
Trisodium Phosphate
Tung Oil
Turpentine
Vinegar 70 F (24 C)
Water, Acid Mine
Water Deionized
Water Demineralized
Water Fresh 180 F (82 C)
Water Fresh 225 F (107 C)
Water Salt 180 F (82 C)
Water Sewage 80 F (27 C)
Whiskey and Wine
White Liquor
Xylene, Xylol
Zinc Chloride 5% 160 F (71 C)
Zinc Phosphate
Zinc Sulfate 25% 180 F (82 C)
416 SS
E Excellent
G Good
F Fair
U Unsatisfactory
Seat
Nickel-Plated
Ductile Iron
Rating Interpretation
G
U
F
U
G
G
U
F
U
U
U
U
U
U
U
G
G
U
U
U
U
F
U
U
G
F
E
G
E
F
U
U
U
U
U
U
E
E
U
G
U
E
U
G
E
E
E
E
E
U
E
U
E
E
G
E
E
E
E
E
E
E
E
G
E
E
E
E
F
G
E
G
G
E
G
G
G
G
G
F
G
E
U
E
E
E
E
E
E
G
G
G
E
G
E
G
G
F
E
G
E
E
E
G
E
G
E
U
G
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
E
E
E
E
E
E
E
E
E
E
E
G
E
E
G
G
G
U
E
F
G
G
E
E
G
G
E
E
E
E
E
E
E
E
E
E
G
E
F
G
U
U
U
G
U
F
F
E
G
G
F
E
E
G
U
G
E
E
G
U
E
E
E
G
G
F
G
U
U
U
U
E
F
G
U
G
F
E
G
U
G
E
U
E
E
G
E
U
U
U
U
E
G
U
E
E
E
E
F
U
F
G
G
U
E
E
E
E
E
E
E
G
E
U
F
E
U
E
E
E
E
E
U
U
U
E
E
E
E
E
E
U
G
U
U
E
G
U
G
U
U
E
F
E
E
E
E
E
E
E
U
E
E
E
E
E
U
E
U
G
F
U
G
U
U
G
F
F
U
U
U
F
U
E
G
F
F
F
U
U
F
F
U
-
38
Operational Support
Camerons ability to address valve requirements in the field is a reflection of our
commitment to life-of-asset support.
39
Trademark Information
DEMCO is a registered trademark of Cameron. CAMSERV is a trademark of Cameron.
This document contains references to registered trademarks or product designations,
which are not owned by Cameron.
Trademark
Owner
Celcon
Delrin
Fluorel
Hastelloy
Hycar
Hydrin
Hypalon
Inconel
Monel
Nordel
Stellite
Teflon
CERTIFICATIONS
40
41
ENVIRONME
N
XCELLEN
LE
CE
TA
TH SAFETY
AL
A
HE
ND
CA
MERON
2013 Cameron | DEMCO, NAVCO, NUTRON, THORNHILL CRAVER, TOM WHEATLEY, WHEATLEY and WKM are registered trademarks of Cameron.
CAMSERV and TECHNO are trademarks of Cameron. Total Valve Care is a service mark of Cameron. Teflon and all brands listed
are registered trademarks or trademarks of their respective companies. | SWP 2M | 11/13 AD00839V