Professional Documents
Culture Documents
Infrared sensors can be used to measure the surface temperature of brake discs, allowing assessment of brake cooling effectiveness and the likelihood of excessive wear of friction material. MoTeC
offer two types of Infrared Brake Temperature Sensor, to suit both carbon fibre and steel brake discs,
with calibrations taking into account the different emissivity values of the two materials. This data
sheet covers the following sensors:
52005 0-1200C IR Temp Sensor more suitable for carbon-fibre brake discs
52006 0-1000C IR Temp Sensor more suitable for steel brake discs
Specification:
Supply
Signal
Housing
Measurement Distance
Field of View
Spot Size
5 to 16V
0-5V
-20 to +120C
Aluminium Alloy
30mm to 70mm
14
20mm at 50mm
Wiring:
Supplied with 1m PTFE 26AWG cable
Red = Power
White = Signal
Blue = Ground
Calibration
Sensor calibration is done at a distance of 50mm from
the target, and a different calibration is used depending on whether the sensor is being used to measure
the temperature of carbon fibre or steel
52005 Carbon
52006 Steel
Volts
Volts
0.00
0.00
100
0.01
0.02
200
0.05
0.07
300
0.11
0.14
400
0.21
0.27
500
0.37
0.49
600
0.61
0.84
700
0.94
1.34
800
1.40
2.02
900
2.00
2.89
1000
2.78
4.01
1100
3.76
1200
4.99
Temp (C)
MoTeC Europe Ltd, Unit 14 Twyford Mill Industrial Estate, Adderbury, Oxon, OX17 3HJ
Tel: 08700 119 100 Fax: 08700 111 922 www.motec.com.au sales@moteceurope.co.uk