Professional Documents
Culture Documents
Equipment Failures
Equipment Failures
The Air Dryer failed to work as usual and continually leaking air.
The pressure seal of the piston get damage
Bring new one and repair kit
While tripping in with DBP, after resuming operation the Hyd Control Switches
started leaking with high pressure.
The most probable reason is long using and the seals are not quite good in quality.
And the Maximum Relieve valve not working.
Send new hydraulic distribution switch case ASAP because this is
not first time to be failure. with enough quality seals (see the
photos of seals below).
- Check whole hydraulic hoses and system.
Check the Max. Relieve valve.
-
The Gen Set No.1 (SN: 2013249586) started on 21.Dec (due to fault in the
Gen Set No.2), On 22.Dec stopped due to high coolant temperature error.
VOLVO TAD1343GE Radiator
the dirt in the radiator cause the engine temperature to rise and reach 90c