Professional Documents
Culture Documents
KMSAuto Net 2015 Readme - en
KMSAuto Net 2015 Readme - en
MSFree Inc.
System requirements:
VL editions: Windows Vista, 7, Windows 8, 8.1, 10, Server 2008, 2008 R2, 2012,
2012 R2, Office 2010/2013/2016.
Description:
Run KMSAuto Net.exe as administrator and use the interface. If you need addition
al
program features, enter into Professional Mode. The On/Off Professional Mode but
ton
is placed in the "About" Tab.
The easiest way to use the program is to pick the automatic mode. All you need t
o do is
click on the button if you want to activate and agree to create a scheduled task
for
reactivation by pressing the button.
Tip: First you need to activate Windows and Office in manual mode, and only then
,
when you are sure that the activation takes place, you can create a scheduled ta
sk for
reactivation products every 25 days.
If the system does not want to be activated in Professional Mode go to "Utilites
" and
manually set GVLK key for the proper Windows Edition, and then try to activate a
gain.
Additional Information:
To activate Windows 8.1 the TAP network adapter must be installed directly
and use the IP address 10.3.0.2-254 or use a special driver. All these features
are built into the program.
To activate via LAN, the TAP interface can't be used to install and
activate through an address of a computer in the network.
If you reconfigure the program and it stops operating correctly - check the chec
kbox
"Reset the program." All settings will be set by default.
/win=act
/off=act
/log=yes
/kmsset=yes
he program.
/kmsdel=yes
e program.
/key=yes
it
/task=yes
ndows and
/taskrun=yes
dows and
/convert=
version
- Run
and
- Run
and
- Run
and
- Run
l, win81wmc
After using this function, you need to restart your co
mputer.
/sound=yes
/sound=no
- Enable sounds.
- Disable sounds.
The activation will be done with the settings defined in the tab KMS-Service.
When you transfer the program to another computer, you need to reset the Auto Mo
de.
Activation would still be in automatic, but the mode may not be optimal
for your new computer.
To reset the auto mode to the initial state you need to switch to any other mode
,
and then again select auto. Everything is now reset to the initial state.
About how to activate the built-in program
The program can perform the activation with built-in KMS server Emulator in seve
ral
different ways. Why are there several of them?: the standard way to connect to t
he activation
server through the local host (127.0.0.2-254) was blocked in Windows 8.1.
All methods are intended for activation of something to cheat the system, do so
that it "thinks" that the KMS server is not on your computer, but somewhere far
away in the
network.
Auto
- the program tries to automatically find the way that best suits your
activation
system. Attempts are being made to activate the system or Office for all admissibl
ways your system has, and the one picked by the program it will be held to remembe
To reset to the initial mode, you can switch to any other mode and then select Aut
This mode is selected by default.
Hook
- method based on the substitution of the original file system changed
on a special way.
The new version of the method works without physically replacing the file.
WinDivert- in the system a driver is installed at the time of activation and it
keeps running
to emulate a remote connection to the KMS server.
NoAuto - In this mode, there is no automation, there is need to set the way it
will work.
Is intended for people who know better than me what, how and when to do and whethe
you want to do it or not. :)
TAP
- the system is a virtual device. TAP activation is done through this v
irtual device.
The program includes two drivers for the TAP adapter. If you already
installed one of
the drivers, the program will used the other driver to activate, resu
lting in your
current adapter left intact.
* Mode names on the System tab - clicking these links on which you can change so
me settings.
KMSSS.exe Options
KMS Log Analyzer.xlsm previous versions are incompatible with KMS Server Service
v1.1.7
Perhaps you have a non VL product, not intended for activation of KMS-Service, f
or instance
Windows 7 Ultimate can't support KMS activation, or your antivirus blocks the ac
tivation.
If an antivirus is the culprit you can do the following: in the "System" tab cli
ck on the
blue label "KMS-Service" and in the window that appears remove the check mark. T
hen add the
folder to exceptions in your antivirus program.
I want to say thank you mikmik38, without his work this program would be just im
possible.
To Hotbird64, for his KMS Client, Evgeny972 and guys from forum.ru-board.com for
making
possible assistance and testing of multiple versions of the program.
Ratiborus
Changelog:
v1.4.2
-Changes in program for compatibility with antivirus software.
v1.4.0
-Added: Conversion from Office 2016 Mondo.
v1.3.9
-Conversion from Office 2016 Word, Excel, Access,
OneNote, OutLook, PowerPoint, Publisher RETAIL to VL.
v1.3.8
-Fixed: mapping display buttons when the font is enlarged to 125%.
-Added: Display the license expiration date (180 days 0 hours 0 minutes).
-Added in "Other utilities" restore system files from the disk with your
version/edition of Windows.
v1.3.7
-Fixed: Encoding readme_ru.txt.
-Added readme.txt in the Bulgarian language.
-Utility to save activation MSActBackUp v1.0.8.
v1.3.6
-Updated program ProduKey v1.70 to v1.80.
-Fixed: Setting keys for Office 2016.
-Fixed: The task in the scheduler runs every 10 days.
v1.3.5
-Updated ProduKey v1.66 to v1.70.
-New TAP driver to support Windows 10. A random IP address is used and when the
activation fails check box is cleared.
-Re-compiled KMS Service. So antivirus software will not detect it as threat/fa
lse positive.
-Included utility MSActBackUp.
-Added Keys for Windows 10 and Office 2016.
-Conversion from Office 2016 RETAIL to VL.
-If Office is not installed, the button "Activate Office" is disabled.
-In the "About" tab you can find a link to a page with my programs.
-Added program for Windows 10 "Show or hide updates"
v1.3.4
-Changes in program for compatibility with antivirus software.
v1.3.3
-The program, when attempting activation of Office 2013 RETAIL converts the lic
ense channel
of OfficeProPlus, VisioPro, ProjectPro on Windows 7, 8, 8.1, 10 to KMS client.
v1.3.2
-Small changes to the interface, added compatibility with Windows Technical Pre
view.
-Now the program has French interface, thanks to coleo.
v1.3.1.b4
-Added function that runs the script from heos(ru-board.com).
This script searches for installed but outdated update Office 2010/2013
and makes it possible to remove them.
v1.3.1.b3
-Added function for switching language interface.
v1.3.1.b2
-Fixed bug when working with command line parameters creating a scheduled task.
v1.3.1.b1
-Added support to activate Windows Technical Preview, Windows 10.
v1.3.0
-Added support to activate OEM editions: "Windows 8.1 Single Language with Bing
",
"Windows 8.1 with Bing" and "Windows 8.1 Pro for Education"
v1.2.8
-ProduKey program updated from v1.65 to v1.66.
-Replaced SppPatcher in the Hook SECO Injector method.
-Eliminated an error that displays "Activation interval" in ES, VI, UA transfer
s.
v1.2.7
-To view the log in the activation program now KMS Log Analizer.xlsm is integra
ted.
-The computer should have an application installed to view .xlms files (MS Exce
l).
-Work on adapting the program to the new format of the log file performed by Bo
rt_Nick,
forum.ru-board.com.
-In "Auto" mode the program starts searching for a solution with the correct IP
address.
-Fixed a rarely occurring bug related to the inability to delete files "Injecto
r by deagles".
Program could hang with the message "Installation Hook, Injector by deagles"
-Activation functions are optimized for Windows and Office.
-On the Utilities tab a button was added "Resetting the system is not valid."
Carefully read the message that appears when you click on this button!
v1.1.6
-Added the ability to reset the program to default values.
-New containers for modules. Unpacking modules and drivers is faster.
-Task scheduler creates tasks on behalf of the Administrator.
-Deleting addresses from KMS Server is working correctly.
-Fixed some minor bugs.
*** Happy New Year 2014 ! ***
v1.1.4
-Program settings can be saved in a folder containing the program.
-All modules of the program can work from ProgramData or the folder containing
the program.
-Fixed minor bugs.
v1.1.2.b8
-ProduKey program is integrated into the executable file.
v1.1.2.b7
-Fixed bug accessing the folder.
v1.1.2.b6
-Fixed a bug in the Scheduler.
v1.1.2.b4
-In Auto mode, you can disable any method of activation.
v1.1.2.b3
-Hook method uses a modified SECO Injector. Works at Activation and Renewal int
ervals
and set own ePID.
v1.1.2b2
-Option to connect to the KMS server where Hook mode works without replacing fi
les.
-Added option in the task scheduler to create the task in the ProgramData\KMSAu
toS path.
v1.1.1
-Added activation method with temporary substitution of 8.1 files.
v1.0.9.1
-Eliminating annoying bug with non-removed service TunMirror.
v1.0.9
-Program requires .NET Framework 4.5 again, as per users request.
-Dialog to change the product key appears only once per session with the progra
m.
-When the scheduled task executes, the KMS-Service is no longer removed from th
e system,
if it was installed the first time.
-New added NoAuto option to disable automatic loading KMS-Service during activa
tion.
Hence, if NoAuto then full NoAuto.
-In Auto mode when the configuration switch is added, the analysis of the
system will always begin from the start position, and not from the previously stor
ed.
This is convenient if the program is run on different computers.
-Before activating the system editon is defined and if it is 8.1 then the class
ic way
of local host activation is excluded.
-Added a second type of TAP adapter to resolve the conflict with the already es
tablished TAP VPN.
-WinDivert v1.1 has been applied, so not "incidents" result in BSOD on x86 syst
ems.
-Eliminate errors when in the file path a sign "&" (ampersand) is present.
v1.0.8
-Added a setting to remove the WinDivert driver. To avoid a possible crashing o
f your
system in a BSOD, the unconditional removal can be turned on.
By default, the removal is made after reboot.
-Added the ability to run the program with switches at the command line.
v1.0.8.b5
-The program combines three ways to connect to the KMS server, first try automa
tic mode
setting.
v1.0.7
-New KMS Server Service (KMSSS.exe). Added function to display the IP
address of the client in the log file. More in KMSSS.txt
v1.0.6
-New KMS Server Service (KMSSS.exe). More in KMSSS.txt
-Cosmetic changes to the interface
v1.0.5
-Log file that includes information about de client OS version.
-Fixes the problem with the definition of a folder Sysnative.
v1.0.4
-New KMSSS.exe, KMS Server Service.
-KMS Service Log output in the specified folder.
-Fixed some minor bugs :)
v1.0.3
-Applied a modified KMS-Service. Allows for the use of each product your own eP
ID.
Including CSVLK from actual key.
-Changed the installation and removal of TunMirror.
-Changed the installation and removal of TAP interface.
-Added support for activation of Core, Embedded Industry, Single Language, etc.
v1.0.2
-Change the setting of TAP interface.
-New feature for activation Backup / Restore.
-Cosmetic changes to the interface.
-Added the ability to create a task scheduler to activate.
v1.0.1
-Added GVLK keys to Server R2.