Professional Documents
Culture Documents
Acceleration Control
Component Locations
Item
1
2
3
4
5
6
7
Part Number
9725
9725
9A758
9728
9728
9728
9728
Description
Accelerator pedal and shaft, all except Bullitt
Accelerator pedal and shaft, Bullitt
Accelerator cable
Accelerator cable bracket, 3.8L
Accelerator cable bracket, 4.6L (2V) Bullitt
Accelerator cable bracket, 4.6L (2V)
Accelerator cable bracket, 4.6L (4V)
The throttle is controlled by the accelerator cable (9A758) which is connected to the accelerator pedal and shaft (9725).
The accelerator pedal and shaft should travel smoothly from the idle to the wide-open throttle (WOT) positions. Hesitation on return or prevention of return to the idle position must not
occur.
Surrounding components such as wiring, hoses, sound insulator and floor covering must not contact the sliding inner member of the accelerator cable or the accelerator pedal and
shaft.
The sliding inner member accelerator cable should not be lubricated and is not serviceable.