Professional Documents
Culture Documents
O&M
for BTS 3012
www.huawei.com
Contents
page2
page3
page4
Managed objects
page5
Managed objects
page6
Contents
page7
page8
page9
IP address and subnet mask for it, and ensure that the IP
address is in one network segment with the IP address of the
BTS (129.12.15.15).
page10
displayed
page11
Step 4 In the Select Communication Port list box, choose Network Port.
In the Configure IP list box, set the IP address of the DTMU to 129.12.15.15
(default IP address).
Click OK. The Site Maintenance Terminal System window is displayed
It means that the Site Maintenance Terminal System starts successfully
page12
page13
Contents
page14
Managed objects
page15
page16
Site opstart
page17
View resources
page18
Software download
page19
Software activation
page20
The BTS is reinitiated. BTS configuration data is loaded, but the program is
not loaded.
Fourth level reset:
Reset the BTS hardware. Load data. Load program from the flash memory.
Reset port:
Ring network Port 0 is forward link, and port 1 is reverse link. Non-ring
network Not selected.
HUAWEI TECHNOLOGIES CO., LTD.
page21
Site test
page22
page23
page24
Environment monitor
page25
page26
page27
Contents
page28
Managed objects
page29
Cell opstart
page30
page31
Cell test
page32
Contents
page33
Managed objects
page34
BT opstart
page35
page36
BT reinitialization
page37
BT loop test
BIU loop test tests if the RSL on the data bus (DBUS) is normal.
TRX self-test tests the TRXs and reports the test result.
page38
page39
page40
Contents
page41
Managed objects
page42
RC attributes management
page43
RC opstart
page44
page45
RC reinitialization
page46
Contents
page47
Managed objects
page48
Channel opstart
page49
page50
This test is used to test the receive and transmit performance on the air interface.
BIU loop test
The DTMU provides a path for the TRX to implement loop test. This test is used to test the performance
of the DBUS.
BTS sound loop test
This test is used to test the connection of the TRX speech channel between the air interface and the
DBUS.
TRX sound loop test
This test is used to test the connection of the TRX speech channel between the air interface and the
Digital Signal Processor (DSP).
HUAWEI TECHNOLOGIES CO., LTD.
page51
Contents
page52
Managed objects
page53
Managed objects
page54
Rack configuration
page55
Board configuration
page56
Board management
page57
Board reset
page58
opstart
page59
Board test
page60
Baord management
page61
Board information
This function is used to query the software version and alarm number of a board.
HUAWEI TECHNOLOGIES CO., LTD.
page62
Board in position
page63
page64
Clock setup
page65
Configure DDPU
page66
Changeover
page67
www.huawei.com