Professional Documents
Culture Documents
2N3906 3
2N3906 3
DATA SHEET
book, halfpage
M3D186
2N3906
PNP switching transistor
Product specification
Supersedes data of 1997 Jun 20
1999 Apr 23
Philips Semiconductors
Product specification
2N3906
FEATURES
PINNING
PIN
DESCRIPTION
collector
base
emitter
handbook, halfpage1
2
3
MAM280
Fig.1
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 134).
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
VCBO
collector-base voltage
open emitter
40
VCEO
collector-emitter voltage
open base
40
VEBO
emitter-base voltage
open collector
IC
200
mA
ICM
300
mA
IBM
100
mA
Ptot
500
mW
Tstg
storage temperature
65
+150
Tj
junction temperature
150
Tamb
65
+150
1999 Apr 23
Tamb 25 C
Philips Semiconductors
Product specification
2N3906
THERMAL CHARACTERISTICS
SYMBOL
Rth j-a
PARAMETER
CONDITIONS
VALUE
UNIT
250
K/W
note 1
Note
1. Transistor mounted on an FR4 printed-circuit board.
CHARACTERISTICS
Tamb = 25 C unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN.
MAX.
UNIT
IE = 0; VCB = 30 V
50
nA
IC = 0; VEB = 6 V
50
nA
DC current gain
60
IC = 1 mA
80
IC = 10 mA
100
300
IC = 50 mA
60
IC = 100 mA
30
ICBO
IEBO
hFE
collector-emitter saturation
voltage
200
mV
200
mV
VBEsat
850
mV
950
mV
Cc
collector capacitance
IE = ie = 0; VCB = 5 V; f = 1 MHz
4.5
pF
Ce
emitter capacitance
10
pF
fT
transition frequency
250
MHz
noise figure
IC = 100 A; VCE = 5 V; RS = 1 k;
f = 10 Hz to 15.7 kHz
dB
VCEsat
turn-on time
65
ns
td
delay time
35
ns
tr
rise time
35
ns
toff
turn-off time
300
ns
ts
storage time
225
ns
tf
fall time
75
ns
Note
1. Pulse test: tp 300 s; 0.02.
1999 Apr 23
Philips Semiconductors
Product specification
2N3906
MGD835
160
hFE
120
80
40
0
102
101
10
102
VCE = 1 V.
VBB
VCC
RB
RC
Vo
(probe)
oscilloscope
450
(probe)
450
R2
Vi
DUT
R1
MGD624
Vi = 5 V; T = 500 s; tp = 10 s; tr = tf 3 ns.
R1 = 56 ; R2 = 2.5 k; RB = 3.9 k; RC = 270 .
VBB = 1.9 V; VCC = 3 V.
Oscilloscope input impedance Zi = 50 .
1999 Apr 23
oscilloscope
IC (mA)
103
Philips Semiconductors
Product specification
2N3906
PACKAGE OUTLINE
Plastic single-ended leaded (through hole) package; 3 leads
SOT54
E
d
L
b
1
e1
3
b1
L1
2.5
5 mm
scale
b1
e1
L1(1)
mm
5.2
5.0
0.48
0.40
0.66
0.56
0.45
0.40
4.8
4.4
1.7
1.4
4.2
3.6
2.54
1.27
14.5
12.7
2.5
Note
1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities.
OUTLINE
VERSION
SOT54
1999 Apr 23
REFERENCES
IEC
JEDEC
EIAJ
TO-92
SC-43
EUROPEAN
PROJECTION
ISSUE DATE
97-02-28
Philips Semiconductors
Product specification
2N3906
DEFINITIONS
Data sheet status
Objective specification
This data sheet contains target or goal specifications for product development.
Preliminary specification
This data sheet contains preliminary data; supplementary data may be published later.
Product specification
Limiting values
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.
1999 Apr 23
Philips Semiconductors
Product specification
2N3906
NOTES
1999 Apr 23
Internet: http://www.semiconductors.philips.com
SCA63
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
115002/00/03/pp8