You are on page 1of 1

Features & Specifications

The bio batteries are stacked in single or a multi cell prototype. The packaging aspects of the bio-fuel cells are also
analyzed and the found that relatively little work has been done in the engineering development of bio-fuel cells
The single cell type bio battery prototype has a power density of approximately 10 mili wat per square cm at the current
density of 25 mA per square cm providing voltage of about 800 mV. While the six cell stack has apower density of
approximately 0.25 mili watt per square cm at the current density of 125 mA per square cm providing voltage of about 2
volts
This 5W Prototype with 15-Cell Graphite Stack Designed and fabricated with graphite bipolar plate configuration . This
Stack provides 5V at 1A (5W).It is Fitted with USB connector and demonstrated powering electronic devices and
recharging an iPhone.

You might also like