This circuit diagram shows an LDR light sensor connected to a MCP23017 I/O expander chip which is then connected to an Arduino. Four LDR sensors are connected in a voltage divider configuration with 220 ohm resistors to measure light levels on each input, with the output fed to the I/O expander which then communicates the light readings to the Arduino.
This circuit diagram shows an LDR light sensor connected to a MCP23017 I/O expander chip which is then connected to an Arduino. Four LDR sensors are connected in a voltage divider configuration with 220 ohm resistors to measure light levels on each input, with the output fed to the I/O expander which then communicates the light readings to the Arduino.
This circuit diagram shows an LDR light sensor connected to a MCP23017 I/O expander chip which is then connected to an Arduino. Four LDR sensors are connected in a voltage divider configuration with 220 ohm resistors to measure light levels on each input, with the output fed to the I/O expander which then communicates the light readings to the Arduino.