Professional Documents
Culture Documents
DMM3673 Dsgsdgfgmechanical Design 201520162 - Assignment 1, Due Date Monday 14 March 2016 During Class
DMM3673 Dsgsdgfgmechanical Design 201520162 - Assignment 1, Due Date Monday 14 March 2016 During Class
Question 2
The shaft is loaded by the forces F = 0.75 kN, P = 10.0 kN and T = 55 N.m. The shaft is
made of ductile material of AISI 1030 cold-drawn steel.
a) Calculate all the stresses at point A and B.
(6 Marks)
b) Determine the factor of safety based on the stresses at point A and point B for yielding
using maximum shear stress and distortion energy theories. Compare and comment
about the results.
(24 Marks)
Question 3
Force, F = 850 N causes twisting & bending of a 25 mm diameter shaft fixed to a support at
the origin of the reference system at A. The shaft is made of ductile material of AISI 1095
hot-rolled steel. In actuality, the support may be an inertia that we wish to rotate, but for the
purposes of a stress analysis we can consider this a static problem.
a) Calculate the stress components at point a and point b.
(12 Marks)
b) Determine the factor of safety based on the stresses at point a and point b for yielding
using maximum shear stress and distortion energy theories. Compare and comment
about the results.
(28 Marks)
a
b