Professional Documents
Culture Documents
ID
: 1412413653
Personal Assignment 2
Network Technology
You have been asked to recommend a type of wiring for a manufacturing building. The size
of the building is 200 meters by 600 meters (corre- sponding to about 650 feet by 2000 feet),
and it houses large, heavy machinery. Approximately50 devices in this building must be
connected to a computer system. Each device transmits data at 2 Mbps and sends a small
packet of data every two to three seconds. Due to various building-related factors, any cable
used for this network has to be suspended high overhead in a hard-to-reach location. What
type of cable would you recommend? Use the media selection criteria introduced in this
chapter to arrive at your answer.
Berdasarkan kutipan dari Curt M. White (2013) Data Communications and Computer
Networks A Business User's Approach pada halaman 91 sebagai berikut :
The principal factors you should consider in your decision include cost, speed,
expandability and distance, environment, and security.
Memperhatikan lingkungan kerja pada soal di atas (banyak alat berat tingkat medan magnet
besar), maka dipilih STP (shielded Twisted Pair) yang lebih tahan terhadap noise dan
interference.
PC 41 - 50
PC 31 - 40
SWITCH/HUB 5
SWITCH/HUB 2
PC 21 - 30
SWITCH/HUB 4
SWITCH/HUB 3
SWITCH/HUB 1
RUANG SERVER
Keterangan :
Masing-masing switch diletakkan maksimal 100meter dari switch lainnya sehingga dapat
mengoptimalkan jarak ke device. Konfigurasi kabel Sitch ke Switch menggunakan
crossover (ujung A EIA-TIA 568A dan EIA-TIA568B pada ujung B). Konfigurasi Switch
ke device menggunakan straight (EIA-TIA 568B pada kedua ujungnya).
Dengan memperhatikan noise yang terjadi pada pabrik, maka digunakan kabel berjenis
STP karena lebih tahan terhadap noise dan interfeence dibandingkan kabel UTP. Dari segi
harga jauh lebih murah dibandingkan kabel Fiber Optic. Sehingga dapat disimpulkan :
1. Media yang digunakan menggunakan kabel STP dari segi harga jauh lebih murah
dibandingkan Fiber Optic, serta ketahanan terhadap noise dan interference lebih
REFERENSI
Curt M. White (2013), Data Communications and Computer Networks A Business User's
Approach, 7thedition, Course Technology, USA