Professional Documents
Culture Documents
W0027 UnderstandingNoCarrierforOutgoingCalls
W0027 UnderstandingNoCarrierforOutgoingCalls
A: NO DIALTONE and NO CARRIER means DWG gateway get error response from GSM network
when sending the call out from the GSM module. When this happened, need to follow the below
step to check the error code :
1. Enable GSM SIP map code on the web: system configuration -> SIP parameter
10
Call barred
16
17
User busy
18
No user responding
19
28
31
Normal, unspecified
34
No circuit/channel available
41
Temporary failure
42
44
47
2162
For firmware version higher than 0xxx1001, error code can be checked on CDR statistics.